Mini laboratory centrifuge 846070 for GREINER Bio-One microplates

Beckman Coulter Avanti J-25 Centrifuge This item was removed from a university laboratory where it w (more)as surplus to requirements. The centrifuge powers on and is in fair cosmetic condition. The condenser appears to be functional as the unit begins to cool, but a drive error is displayed on the centrifuge.Upon inspection, it was found that the motor had been disconnected, the front panel removed, and most wiring disconnected. This item is sold as-is for Spares/Repairs due to its current state. Specifications:- Serial No.: 270-728845-AA - Model No.: Avanti J-25

This listing is for 1 of 4 DiaMed 12 SII ID-CentrifugesThe centrifuge of the brand Diamed type 12SII (more) is designed to separate different components in a sample. This centrifuge is suitable for centrifuging samples in up to 12 ID cards. The Diamed type 12SII has a wide range of applications, including research and routine laboratories in life sciences, industry, clinics and chemistry.

Megafuge 1.0R Heraeus refrigerated centrifuge Working temperature 0°C + 40°C. maximum speed 6000 rpm (more) Height x width x depth: 39x71x56 cm Net weight: 240 lbs (109 kg) 230 V. 50/60 Hz. 1100 W. With pendulum bucket rotor No. 2705. With nacelles 2252 Maximum swing rotor 5000 rpm. Max. permissible capacity: with rotating rotor 4 x 510 g With 2 adapters of 2 x 50ml With 2 adapters of 4 x 15ml Weakness in the cover cylinders Some traces of rust on the rotor Year of manufacture: 1992 Equipment tested Operational cold unit, tested at 4°C

Benchmark PlateFuge MicroPlate MicroCentrifuge Benchmark’s PlateFuge is the first “mini” sized centr (more)ifuge with a swing out rotor for microplates. Centrifuging plates before PCR ensures all reactants are in the bottom of the wells for proper concentrations and improved yields. In spite of its remarkably small footprint (9 x 10 in.), the PlateFuge includes a uniquely designed, swing out rotor (patent pending) capable of securing 2 microplates. The easily accessible rotor chamber includes two plate carriers that rest at a 75° angle. This allows plates to be inserted confidently without sealing tapes or caps. Upon closing the lid of the centrifuge, the rotor accelerates and the centrifugal force “swings” the plates into a horizontal position. Any droplets on the walls of the plate quickly concentrate into the well bottoms. With a g-force of 600 x g, most samples can be spun down in less than 20 seconds. To end a run, simply open the lid and the automatic, electric brake brings the rotor to a quick, smooth stop in just 4 seconds. Plates can then be easily removed from the rotor. Click Here to View Product Video INCLUDED: The Benchmark PlateFuge MicroPlate MicroCentrifuge includes: - Rotor and Plate Carriers - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This  Beckman Coulter Optima LE-80K Ultracentrifuge was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Included with it are; 1x Beckman Coulter 6 bucket SW 28 RotorMax RPM: 28000 6x Beckman Coulter SW 28 swinging buckets/50 ml tube adapter 1x Beckman Coulter rotor bag 4x Boxes of Beckman Coulter Pollyallomer Centrifuge Tubes 14 x 89 mm 2x Boxes of Beckman Coulter Ultra-Clear Centrifuge Tubes 25 x 89 mm 1x Beckman Coulter Spincote Lubricant 1x Beckman Coulter Silicone Vacuum Grease 1x Beckman Coulter Release tool 1x Beckman Coulter Rotor Safety Manual 1x Beckman Coulter Rotors and Tubes instruction CD

Beckman Optima L-100 XP Ultracentrifuge Lab This item was removed from a university where it was sur (more)plus to requirement. It has been professionally serviced, is in full working order, and is in good cosmetic condition. The full report is available on request. Also includes: 1 x Service Book 1 x Log Book 4 x Foot Plates

PS.R1 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. New PS.R1 balances like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm. Balances with a smaller pan have a draft shield. They were equipped with the system of external mass adjustment. PS.R1 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). . Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard: Database – a direct access to databasis Function - a direct access to the basic functions F1 to F4 – programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

MAS R is a device comprising electromagnetic MAS module of high resolution and R operation panel equ (more)ipped with an LCD. MAS R is known for its great adaptation possibilities both when speaking of its integration into a technological line and building it into a customer-owned device. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.1 mg, Overload protection, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration, The module has been equipped with RS232 and USB type B interfaces. The measurements are possible to be performed using an under-pan weighing solution and a regular weighing pan. It is recommended to build the module into customer's device, e.g. draft shield. With this the negative effect of ambient conditions brought about onto the weighing result is reduced. The module comes standard with a dedicated power supply. Dedicated software Dedicated freeware, the R Panel, has been designed to enable control of the module via a computer. It provides access to all the keys and functions available directly from the operation panel, e.g. taring, zeroing, setup, etc. An innovative algorithm for automatic search of electromagnetic weighing modules is a guarantee for a remarkable ease of connection of a module to a computer. With R Panel software, the complete functionality of R series balances is available via PC . R Panel functionality has been implemented in RLab program as one of its numerous functions.

Eppendorf FA-45-30-11 Fixed Angle Rotor, Cat. #: 5409706004 The Eppendorf FA-45-30-11 Fixed Angle Ro (more)tor, Cat. #: 5409706004, is a centrifuge rotor designed for use with the Eppendorf 5427R centrifuges. This rotor has a maximum speed of 14,000 RPM and a maximum relative centrifugal force (RCF) of 20,817 x g. It can accommodate a maximum capacity of up to 30 × 1.5/2.0 mL tubes. INCLUDED: The Eppendorf FA-45-30-11 Fixed Angle Rotor includes: - FA-45-30-11 Fixed Angle Rotor - Aerosol-tight Lid - Full 1 Year Parts and Labor Warranty Eppendorf FA-45-30-11 Fixed Angle Rotor, Cat. #: 5409706004 SpecificationsMaximum Speed14,000 RPMMaximum RCF20,817 x gMaximum Capacity30 × 1.5/2.0 mL tubesRadius9.5 cmCentrifuge CompatibilityEppendorf 5427R SeriesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }