Thermo MicroCL 17R Refrigerated Microcentrifuge

HERMLE ZK-401 Refrigerated High Performance Centrifuge Maximum speed: 24,000 rpm Max. centrifugal fo (more)rce : 70,965 g (depending on rotor) Maximum filling quantity: 3000.0 ml (with suitable rotor) Power supply: 380V/50 Hz (CEE32 socket) 19.5A 11.0kVA Three-phase Dimensions: L x W x H = (825 x 765 x 940) mm Mass: approximately 320 kg Sound level: 69 dB(A) Setting temperature range: -20ºC to +40ºC Year of manufacture: 1990 Operating hours: 1403h With 5 rotors (4 fixed angular + 1 rotor with oscillating buckets): 2 X Fixed Rotor A12.17 Max speed: 16500 rpm For 12 tubes 1 X Fixed Rotor A6.14 Max speed: 14400 rpm For 6 tubes 1 X Fixed Rotor A8.24 Max speed: 24000 rpm For 8 tubes Equipment tested: 10000 revolutions => OK Cold group => OK Note: Commissioning must be carried out by a technician specialized in this type of high performance centrifuge

BIOFUGE 15 HERAEUS high-speed universal centrifuge with rotor 3754 Max. Centrifuge speed: 15000 rpm  (more)not refrigerated Voltage: 230V / 50/60Hz Net weight: 15kg Dimensions: 27 x 37 x 24 cm Power: 250W With fixed rotor 3754 Max. Rotor speed: 14,000 rpm 24 x 1.5 / 2ml Microtubes / tubes Tested at 12000 RPM Year of manufacture: 1995 In excellent working and aesthetic condition

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heraeus Instruments Labofuge 400R Function Line Lab This item was removed from a university where i (more)t was surplus to requirement. It is in fairly poor cosmetic condition and powers on, however, due to an issue with the cooling/heating element it did not reach any desired temperature when tested. Therefore, it is listed as Spares/Repair. Additionally, it was tested to its maximum speed of 4500RPM, which performed well with no issues.

Rousselet Robatel DRC 60 VX AY 1Sman Decanting Centrifuge This was removed from a laboratory where  (more)it was surplus to requirements. The system has not been tested as it has been disassembled to some degree.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.