Thermo CL10 Centrifuge

Speed: 800 to 14500 rpm (100 rpm steps) Maximum RCF: 14100 x g Maximum capacity: 12x 1.5/2.0 ml Acce (more)leration time: 13 s Deceleration time: 12 s Timer: 15 s to 99 min, continuous Dimensions (WxDxH): 225 x 230 x 130 mm Weight: 4.1 kg Equipped with a Eppendorf F-45-12-11 fixed angle rotor (max 14500 rpm)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Mini laboratory centrifuge 846070 for GREINER Bio-One microplates New equipment in its original pack (more)aging Speed: 2,550 rpm (16,022.1 rad.min-1) Capacity: 2 Microplates

Hersteller: Thermo Scientific Modell: Sorvall Legend Micro Pico 21 Kernmerkmale: - Leichte Bedienung (more) durch intuitive Bedienelemente, leicht abzulesende Displays und schnell mit einem Klick verriegelbarem Zentrifugendeckel - Schlankes, leichtes und platzsparendes Design - Langlebig und einfach zu reinigen und zu warten - Außergewöhnliche Beschleunigung von bis zu 21,000 x g in nur 12 Sekunden - Entspricht den aktuellsten Klinik- und Sicherheitsstandards und ist In-Vitro-Diagnostics (IVD)-konform gemäß 98/79/EC. Technische Daten: Fassungsvermögen: 24 x 1.5/2 mL Max. Geschwindigkeit:14,800 rpm Max. RZB: 21,100 x g Geräuschpegel: 56 dB(A) Temperaturbereich: Ambient temperature Zertifizierung/Konformität: CSA, CE, IVD Typ: Benchtop Centrifuge Beschreibung: Sorvall Legend Micro 21 Centrifuge, Ventilated Elektrische Anforderungen: 100 V 50/60 Hz Gekühlt: No Laufzeit: 1 to 99 min. (1 min. increments); HOLD Standards: IEC 61010-1, IEC 61010-2-020 (refer to manual for more details) Abmessungen (H x B x T): 8.9 x 9.6 x 13.8 in. (22.5 x 24.3 x 35.2 cm) Nettogewicht: 23.1lb. (10.5 kg) Produktlinie: Sorvall Frequenz: 50/60 Hz Lieferumfang: - Sorvall Legend Micro Pico 21 - Bedienungsanleitung als PDF via E-Mail Bei Bedarf eines passenden Roters, helfen wir gerne! Das Gerät befindet sich in einem absoluten Top Zustand und wurde 100%  auf Funktion geprüft.

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Weighing range: 0 to 109 g Readability: 0.1 mg Reproducibility: 0.1 mg Linearity: ± 0.2 g Weighing p (more)latform: 80 mm Height above weighing platform: 215 mm Dimensions (WxDxH): 205 x 410 x 290 mm Weight: 10.3 kg

Capacity: 230 g Readability: 0 – 60 g = 0,01 mg, 60 – 110 g = 0,02 mg, 110 – 230 g = 0.05 mg Repeata (more)bility: 0 – 60 g = ± 0.015 mg, 60 – 110 g  = ± 0.04 mg, 110 – 230 g = ± 0.04 mg Linearity: ± 0.15 mg Response Time: 8 seconds Selectable Weight Units: g, kg, ct, lb, oz, ozt, tlh, tls, tlt, GN, dwt, mg, /lb, tlc, mom, K, tol, bat, MS and parts per lb 17 Selectable Application Programs: Mass unit conversion by toggling,counting, weighing in percent, animal weighing, recalculation, calculation, density determination, differential weighing, air buoyancy correction, air density determination, checkweighing, time-controlled functions, totalizing, formulation, statistics, 2nd tare memory, identification codes, 300 product data memory Display Update: 0.2 – 0.4 s depending on filter level Sensitivity Drift (10°-30°C): ± 1 ppm/°C Pan Size: ø 90 mm Dimensions (WxDxH): 252 x 533 x 292 mm Weighing chamber (WxDxH): 193 x 183 x 292 mm Clearance above platform: 252 mm