Heraeus Instruments Labofuge 400R Function Line Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Beckman L7-65 Refrigerated Centrifuge L7-65R This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and will run to 1500rpm, but it cannot create a sufficient vacuum to run at higher speeds. For this reason it is sold for spares/repairs.

Lot Of Heraeus Centrifugal Rotor Buckets And Tube Holder Bucket Inserts Lab These items were removed (more) from a university lab where they were surplus to requirement. All items are in good cosmetic condition but have not been tested. The items included are as follows: - 4 x Heraeus #7570 E Rotor Buckets (max capacity of 600g) - 3 x Heraeus #8030 Rotor Buckets (max capacity of 510g) - 3 x Tube Holders For 15-25ml Tubes - 4 x Tube Holders 50ml Tubes

MARSHALL Select MS-CE12000 Hematocrit Centrifuge, 12,000 RPM Maximum Speed 12,000 RPM Maximum RCF 1 (more)4,170 × g Maximum Capacity Hematocrit Rotor: 24 x capillaries Features - Reaches up to 12,000 RPM for efficient hematocrit determinations - Streamlined and practical with an all-steel structure for durability and safety - Space-saving design suitable for various laboratory settings - Features an integral food-grade silicone ring to prevent aerosol overflow - Includes detection functions for door lock and motor status - Push-button programming with digital display for easy parameter settings The MARSHALL Select MS-CE12000 Hematocrit Centrifuge, a high-performance centrifuge engineered to meet the demanding requirements of immunohematology and research laboratories. Operating at a maximum speed of 12,000 RPM, this centrifuge specializes in the accurate determination of hematocrit (HCT) values by centrifuging anticoagulant-treated whole blood in disposable capillary glass tubes. After a brief 5-minute spin, the proportion of red cells is measured against the total volume of blood, allowing precise analysis of the blood's hematocrit level. The machine's ergonomic, streamlined design not only ensures practicality and safety with its all-steel structure but also enhances the aesthetic appeal of any laboratory setting. The MS-CE12000 is not just robust but also intelligently designed for ease of use and safety. It features a compact, space-saving footprint and is equipped with an integral food-grade silicone sealing ring to prevent aerosol overflow, safeguarding the operator. The centrifuge boasts electromechanical integration for its door lock, ensuring reliability and safety during operation. Additionally, its user-friendly interface includes push-button programming and a digital tube display for setting and monitoring centrifugal speed and time. With real-time detection systems for door lock and motor status, complemented by an alarm function for enhanced diagnostic safety, this centrifuge is an essential tool for modern laboratories focused on hematology and cytology. INCLUDED: The MARSHALL Select MS-CE12000 Hematocrit Centrifuge, 12,000 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Thermo Multifuge X3 FR refrigerated centrifuge. Maximum speed for oscillating rotors 6000 rpm (7164  (more)xg) and for fixed angle rotors 15200 rpm (25,830 xg). Adjustable temperature from -10°C to +40°C (CFC-free). Timed from 1 to 99 h, 59 min or continuous operation. Programmable and 99 preset programs. (HxWxD) 840*546*670mm; 152.20 kg plus rotor. PDF User Manual. Includes TX-750 oscillating rotor (75003607) of 4 x 1000 ml and maximum speed of 4,700 rpm. (4.301 xg) Acceleration and braking time 65/50 s. - Precooling with direct button. - Maintenance-free induction motor. - Automatic rotor locking system with button. - Microprocessor control. - Internal memory that saves the most recent data. - RCF selection. - Temperature and pre-temperature control. - 9 acceleration curves and 10 braking curves. - Automatic rotor recognition - Recognition of electronic imbalance. - Auto-Lock® III rotor system allowing installation and exchange of rotors with the push of a button. - Automatic lid closure and locking. - Digital display. The Thermo Multifuge X3 FR refrigerated centrifuge is high-quality laboratory equipment that offers exceptional performance. Designed to meet the needs of scientists and research professionals, this centrifuge features a 4 x 1000 ml TX-750 (75003607) swing rotor, allowing large sample volumes to be processed efficiently. Thanks to its advanced cooling system, this centrifuge ensures a constant and precise temperature during the centrifugation process, which is especially important to preserve the integrity of heat-sensitive samples. Additionally, its ergonomic design and intuitive interface make it easy to use and allow for hassle-free operation. Thermo Multifuge X3 FR offers a wide range of functions and features, such as the ability to program different spin profiles, adjust spin speed and time, and select between different acceleration and deceleration modes. In addition, it has a high-resolution LCD screen that clearly displays centrifugation parameters and allows real-time monitoring. It has four with lockable wheels. With its ability to process up to 4 1000 mL tubes simultaneously, this centrifuge is ideal for high-demand applications such as separation of cellular components, protein purification, and sample preparation for molecular analysis. Its robust and durable construction ensures long life and reliable performance. 17 optional rotors In short, the Thermo Multifuge X3 FR refrigerated centrifuge is an indispensable tool in any laboratory that requires efficient and reliable centrifugation. With its high-capacity oscillating rotor and advanced cooling system, this centrifuge delivers exceptional performance and ensures the integrity of heat-sensitive samples. Its ergonomic design and intuitive interface make it easy to use, while its wide range of functions makes it a versatile choice for a variety of research applications.

Benchmark MyFuge12 Mini Centrifuge Unlike traditional mini centrifuges, the new MyFuge 12 eliminates (more) the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor is all that is required for running 12 microtubes and/or 4 PCR strips. With a fixed speed that produces 2,000 x g, this centrifuge is perfect for quick spin downs. Simply close the lid and the unit quickly ramps up to 5,500 rpm. Open the lid, and the rotor quickly decelerates for removal of samples. At just 5.5 inches wide and less than 4.5 inches tall, the MyFuge 12 truly is a personal microcentrifuge with unmatched capacity and flexibilty. INCLUDED: The Benchmark MyFuge12 Mini Centrifuge includes: - COMBI-Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected.These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 15 model - Tank volume min. 11 L - Tank volume max. 15 L - Tank opening 230 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -30°C to 230°C - Pump connectors M16 x 1 - Fitting 13 Ø

Applied Biosystems 7500 Fast Real-Time PCR System Lab This system was removed from a university lab, (more) where it was surplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Also includes the following: - Real-Time PCR Systems - Chemistry Guide - Applied Biosystems Site Preparation Guide - Applied Biosystems Getting Started Guide - Allelic Discrimination Guide - 7500 Fast Real-Time Software V1.4 - MicroAmp Adhesive Film

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Ohaus R71MHD3 Ranger 7000 Compact ScaleFor Ranger 7000, there is one resounding theme: it offers the (more) best of every ingenious feature that make OHAUS industrial products the right tools for your toughest weighing jobs. Ranger 7000 boasts the highest resolution, largest display, most application modes and connectivity options, as well as the largest memory library of any industrial compact bench scale in the OHAUS portfolio. Features include: - Simplify complex applications and minimize the need for manual calculations with 10 advanced application modes, peripheral device control and an optional kit for a second scale platform.- The most precise scale in its class with one-second stabilization time, up to 75,000d or 350,000d display resolution and legal-for-trade certifications. - Extremely durable scale designed to thrive in rugged industrial environments. Features IP54 rated metal housing and sealed metal terminal. - With SmarText 2.0 software and a 4.3 inch graphic display, the advanced functionality of Ranger 7000 is simple to use with minimal training. Click Here to View Product Video INCLUDED: The Ohaus R71MHD3 Ranger 7000 Compact Scale includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Roller 10 Basic ShakerRoller shaker with 10 rolls provides smooth rocking androlling action at a (more) fixed speed. Used for mixing blood samples, solid andliquid suspensions and viscous samples. The unit can be used with allconventional tubes and cylindrical bottles. Easily removable attachmentsprovide for quick cleaning in case of sample spills. - Usable at 4 to 50 °C in incubators - Suitable for continuous operation - Removable rolls enable shaking of larger tubes - Easy operation with touch keypad - Shaking diameter: 24,5 mm (height) - Speed range: 30 rpm (fixed) INCLUDED: The IKA Roller 10 Basic Shaker includes: - ROLLER 10 Basic - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 1 Year Warranty Extension with IKA Registration) IKA Roller 10 Basic Shaker SpecificationsType of movementrollingPermissible ON time100 %Speed min.0 rpmSpeed fix30 rpmSpeed displaynoneTimer displaynoneOperating mode continuous operationRolls, number 10Rolls, Ø 32 mmRolls, length327 mmWorking area length350 mmRolls, luffing angle fixed3 °Rolls, max stroke at roll end16 mmRolls, changeable, removableyesDimensions (W x H x D)380 x 115 x 545 mmWeight8.242 kgPermissible ambient temperature4 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage100 - 240 VFrequency50/60 HzPower input24 WDC Voltage24 VCurrent consumption1000 mAComparison of ModelsSpecificationIKA Roller 10 BasicIKA Roller 10 DigitalIKA Roller 6 BasicIKA Roller 6 DigitalType of MovementRollingRollingRollingRollingSpeed Range30 rpm (fixed)5 - 80 rpm30 rpm (fixed)5 - 80 rpmTimerNoYesNoYesNumber of Rolls101066Rolls Diameter32 mm32 mm32 mm32 mmRolls Length327 mm327 mm327 mm327 mmWorking Area Length350 mm350 mm350 mm350 mmDimensions (W x H x D)380 x 115 x 545 mm380 x 115 x 545 mm240 x 115 x 545 mm240 x 115 x 545 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }