Beckman Centrifuge Model - J2-21 Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Maximum capacity: 4 x 750 ml Maximum permissible density: 1.2 kg/dm³ Speed range: 200 – 14000 rpm Ma (more)ximum acceleration: 20913 RCF Maximum kinetic energy: 27450 Nm Dimensions (WxDxH): 535 x 610 x 345 mm Weight: 68 kg Equipped with: 1x Eppendorf A-4-62 swing-out rotor (max 4000 rpm) 4x Eppendorf 03/03 bucket 4x Eppendorf 5810 blue insert (9 positions for 15 mL falcon tubes) 2x Eppendorf 5810 orange insert (4 positions for 50 mL falcon tubes)

Sorvall Evolution RC Floor Standing Centrifuge w/ Sorvall SLA-1500 Super-Lite Autoclavable Rotor Thi (more)s item was removed from a university laboratory where it was surplus to requirements. The centrifuge powers on and is in good cosmetic condition. Temperature and RPM testing were conducted successfully. Temperature Testing :- Set to -20.0ºC, stabilized at -18.0ºC - Set to 37.0ºC, stabilized at 37.0ºC - Set to 40.0ºC (max), stabilized at 40.0ºC RPM Testing:- Held steady at 15,000 RPM Included Rotor:- Sorvall SLA-1500 Super-Lite Autoclavable Rotor (max 121ºC) - In good cosmetic condition

Heraeus Labofuge 400R Refrigerated Centrifuge With Swing Rotor Lab This item was removed from a univ (more)ersity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Also includes the following: 1 x Heraeus 8179 Swingout Rotor 4 x 180ml 1 x Round Bucket 180ml75008172 8 x Bucket Insert

Microcentrifuge Centurion Scientific C2012. Speed of 500 to 12,000 rpm (13.500 g). Timer 0 to 99 min (more). Brushless Motor, maintenance free. Chamber of stainless steel and alloy structure. Sensors for imbalance, overspeed and warming. Does NOT include rotor (can be purchased separately).

Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes Speed Range (more) 200 to 18,000 RPM (4,500 RPM with included rotor) Maximum Capacity 4 x 200ml Warranty 5 Year Manufacturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Optimized airflow system keeps the samples cool (Z327) - Stainless steel chamber The Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes is a high-performance centrifuge capable of speeds ranging from 200 to 18,000 RPM (4,500 RPM with the included rotor), with a maximum RCF of 23,542 x g (3,350 x g with the included rotor). With a maximum capacity of 4 x 200ml, this centrifuge is ideal for a variety of applications in the life sciences, including tissue culture and molecular biology. Its timer allows for up to 99 hours and 59 minutes of operation, with the option for continuous use. The Hermle Z327 also has the ability to store up to 99 programs, making it highly customizable for specific experimental protocols. Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes includes: - Z327 Centrifuge - Z327-200 4 x 200ml Swing Out Rotor and 4 x Z327-200-BUK Buckets - 2 x Z327-200-A57 8 x 1.8-7ml Blood Tube Inserts for Z327-200-BUK - 2 x Z327-200-A10 7 x 10/15ml Round Inserts for Z327-200-BUK - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Gilson Centry 117 Microcentrifuge, 120V Speed Range 1,000 to 13,500 RPM Capacity 1.5 - 2.0ml tubes P (more)rogram Memory 9 Programs Features - Touchscreen Control: Full-color interface displays speed, set time, and remaining run time for intuitive operation. - Custom Run Programs: Store and recall up to nine custom programs with one-button access for streamlined use. - Wide Speed Range: Achieves speeds from 1,000 to 13,500 rpm (100 to 16,800 x g) in 100 rpm increments for versatile applications. - Built-in Timer: Set run times from 1 to 99 minutes for precise control over centrifugation processes. - Temperature Stability: Proprietary air-flow system ensures constant temperature, preserving sample integrity even during extended runs. - Cold Room Compatibility: Can be used in cold room environments for added versatility. - Flexible Rotor Design: Accommodates either 1.5−2.0 mL tubes or PCR strips without the need for separate adapters, offering adaptability for various sample types. - Compact Footprint: Space-saving design takes up minimal benchtop space, ideal for crowded lab environments. With speeds up to 13,500 rpm, the CENTRY 117 Microcentrifuge has an easy-to-use touchscreen and offers one-button recall of up to nine stored custom run programs. Its proprietary air-flow system ensures temperature stability, even on extended runs, preserving sample integrity. The rotor design accommodates either 1.5−2.0 mL tubes or PCR strips. The CENTRY 117 Microcentrifuge has a full-color, touchscreen control that displays speed (rpm or rcf), set time, and remaining run time. Easily program and store up to nine custom run programs, which are simply accessed through a single button. The CENTRY 117 Microcentrifuge achieves speeds from 1,000 to 13,500 rpm (100 to 16,800 x g), which can be set in 100 rpm increments. The built-in timer lets you set any time from 1 to 99 minutes. The CENTRY 117 Microcentrifuge offers improved temperature controls with its proprietary air-flow system, guaranteeing that your samples remain at constant temperature, even during longer runs. The centrifuge can also be used in a cold room. With its combination rotor design, the CENTRY 117 Microcentrifuge can accommodate up to 24 1.5−2.0-mL tubes or 2 PCR strips (16 x 0.2 mL) without needing separate adapters, making this ideal for many labs. In addition, its compact footprint takes up less of your precious benchtop.INCLUDED: The Gilson Centry 117 Microcentrifuge, 120V includes: - Gilson Centry 117 Microcentrifuge, 120V - Certificate of Conformity - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. CHEMISAFE QUARANTINE SYSTEM Thanks to this patented system, in the event of a fire inside the safety cabinet, an automatic response will be activated to overturn the shelves, thus allowing the batteries to fall into a water tank located at the bottom. By immersion, the fire will be promptly extinguished and the potential risk of self-ignition will be effectively neutralised. Simple and very effective system! The cabinet is equipped with a water pump and algaecide. The QUARANTINE versions have only 3 shelves instead of the basic 4. Demonstration video of the QUARANTINE system.

This Peak Scientific PH600-UK Hydrogen Generator was removed from a university lab where it was surp (more)lus to requirements Item is in good cosmetic condition with minor marks but is missing side panel screws. No testing was carried out as it appears to be missing parts. This item is listed as spares/repairs as no tests have been performed.

Infinity 1 Microscope Camera With Software Lab This item was removed from a university where it was  (more)surplus to requirement. It is brand new and sealed in its original packaging. Included software: Infinity Analyze - Complete Image AnalysisInfinity Capture - Basic capture and video

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.