Peak Scientific PH600-UK Hydrogen Generator Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

Packard 9200 Hydrogen Generator This was removed from a university lab where it was surplus to requi (more)rements. We had the unit looked at by a service engineer. It is fully working but is leaking hydrogen. It is in reasonably good cosmetic condition, but has some marks from use. it is sold for spares/repairs

Parker Balston N2-04 Nitrogen Generator This was removed from a university lab where it was surplus  (more)to requirements. It is in good cosmetic condition with minor marks but we were unable to test it as it requires a gas cannister.

Parker Balston Lab Gas Generator Model 74-5041-220 This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in reasonably good cosmetic condition with marks from use.

PEAK Scientific Genius 1053 Nitrogen Generator Lab This item was removed from a university where it  (more)was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. This item requires servicing before use, as the service light illuminates when powered on.

Thermo Haake K10 circulating refrigerated bath. Temperature range from -10 to 100 ºC. Accuracy ± 0.0 (more)2 ºC. Capacity 3 L. Flow 12.5 L/min. PID temperature sensor. Overtemperature and low liquid level protection. Bath opening 13*10*15 cm; total dimension 19.5*36* cm. This Thermo Haake K10 circulating refrigerated bath is ideal for circulating liquids at constant temperature through external closed systems, such as rotary evaporators, photometers, refractometers, viscometers, polarimeters, and spectrophotometers, among others. Furthermore, this refrigerated bath can be used to keep samples at a constant temperature thanks to its electronic PID temperature sensor. Its handling is simple. The pump contains two speeds to reduce turbulence within the bath.

Magnetic Stirrer Heating VWR VMS-C10 Model: VMSC10 Max. stirring capacity H₂O: 15 L Temperature rang (more)e: 50…500 ºC. Rotation speed: 100 to 1500 rpm. Ceramic heating plate dimensions: 26 x 26 cm. Dimensions: 300 x 415 x 105mm Weight: 6Kg Technical specifications: 230 V, 50-60 Hz 1500W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Binder ED23 Drying And Heating Laboratory Oven This was removed from a university lab where it was s (more)urplus to requirements. The item powers on but the displays "error" after a short whilethat prevents the item from being tested. It is in very good cosmetic condition. It is sold for spares/repairs.

Hoefer SE410 Tall Air-Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glass Plate Siz (more)es (W x H) 18 x 24 cm Maximum Power Settings 500 V, 60 mA, 20 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 24 cm - Rugged injection molded construction is durable and assembles easily - Run two gels with the addition of a divider plate - Built-in casting stand seals leak free - Choose from a wide variety of accessories - Plates, clamps, spacers, and combs are interchangeable with the SE600 Series The Hoefer SE410 Tall Air-Cooled Vertical Protein Electrophoresis Basic Unit is a durable and economical choice, specifically designed for educational labs with multiple users. Constructed with rugged injection-molded materials, this compact unit offers long-lasting performance and easy assembly, making it ideal for consistent use in busy lab environments. Accommodating glass plates up to 18 x 24 cm, the SE410 provides ample space for precise protein analysis, with the option to run two gels simultaneously using an additional divider plate. The SE410's built-in casting stand ensures a leak-free seal, streamlining the setup process and enhancing ease of use. For added versatility, its plates, clamps, spacers, and combs are interchangeable with the SE600 Series, allowing labs to expand and tailor their electrophoresis setups as needed. Operating smoothly within standard lab conditions, this unit handles temperatures up to 45°C and humidity up to 80%, with power settings reaching 500 V, 60 mA, and 20 W—delivering reliable performance across a range of applications. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 24 cm, 2 pcs - Clamp Assemblies, 8 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Spacer-Mate Alignment Template - Wonder Wedge-Plate Separation Tool - Gel Seal - Comb, 15-well, 1.5 mm thick - Spacers, 1.5 mm thick, 2 cm wide, 2 pcs INCLUDED: The Hoefer SE410 Tall Air-Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 24 cm, 2 pcs - Clamp Assemblies, 8 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Wonder Wedge-Plate Separation Tool - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

F1 Mass Standard - knob weights, wooden box. Nominal value - 250 kg.

Hermle 3 x 100ml insert for Z496-1000-RBUK 2/pk The Hermle 3 x 100ml insert is a specially designed  (more)accessory for use with the Hermle Z496-1000-RBUK rectangular buckets. This insert comes in a pack of 2 and is capable of accommodating tubes with a maximum diameter of 40mm and length of 123mm. With a maximum capacity of 3 x 100ml per adapter, this insert allows for efficient processing of medium size sample volumes. The compatibility with Hermle Z496-1000-RBUK rectangular buckets makes this insert a versatile addition to any laboratory looking to improve their sample processing workflow. The use of this insert ensures that tubes are securely held in place during centrifugation, preventing any sample loss or contamination. INCLUDED: The Hermle 3 x 100ml insert for Z496-1000-RBUK 2/pk includes: - Set of 2 Adapters - Manufacturer's Documentation - 2 Year Manufacturer's Warranty