copy of Safety cabinet for lithium batteries CSF239BMY11/L LITHIUMSAFE CHEMISAFE

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. CONSTRUCTION - Entirely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. - Special insulation for high temperatures (800°C) with high density 300 Kg/m3 calcium silicate and mineral fiber panels (Fibroceramic free) fixed with ceramic adhesives. - Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. ACCESSORIES Q120: QUARANTINE PATENTED extinguishing system with tank for 120 model. LSSA: automatic fire extinguisher. LSCR: automatic fire extinguisher with control panel, smoke and temperature sensor, beacon. CEGSM: GSM dialer. S6MT: UNEL 220V 6-position electrical multiple socket with thermal protection. S6: UNEL 220V 6-position electrical multiple socket. S12: UNEL 220V 12-position electrical multiple socket. RIP120LS: perforated shelf for 120cm cabinets. INTAKE SYSTEMS DIAM125BP: electric aspirator. CSF100BPAMY11: ATEX electric fan. CFN: molecular aspiration system certified according to standard NFX15-211. Per ulteriori informazioni sui prodotti e i sistemi di sicurezza disponibili, ti invitiamo al nostro post dedicato "LITHIUMSAFE".

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. CHEMISAFE QUARANTINE SYSTEM Thanks to this patented system, in the event of a fire inside the safety cabinet, an automatic response will be activated to overturn the shelves, thus allowing the batteries to fall into a water tank located at the bottom. By immersion, the fire will be promptly extinguished and the potential risk of self-ignition will be effectively neutralised. Simple and very effective system! The cabinet is equipped with a water pump and algaecide. The QUARANTINE versions have only 3 shelves instead of the basic 4. Demonstration video of the QUARANTINE system.

Orbit Marine Div AL-7100-SDU-MK2 Servo Driver Unit This was removed from a university lab where it w (more)as surplus to requirements. It is in good cosmetic condition but has not been tested at our facility.

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W Dimensions (WxDxH): 210 x 245 x 65 mm Weight: 1.1 kg

Sorvall TH-641 Swinging Bucket Rotor 41,000 Max RPM with 4 x Buckets Lab This item was removed from  (more)a university where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility. This item features 4 Sorvall buckets, therefore it is missing 2 of the required buckets.

Eppendorf BioPhotometer Model: 6131 Spectrophotometer This was removed from a university lab where i (more)t was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with marks from use.

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW