Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes

Beckman L7-65 Refrigerated Centrifuge L7-65R This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and will run to 1500rpm, but it cannot create a sufficient vacuum to run at higher speeds. For this reason it is sold for spares/repairs.

This Sorvall RC-5C Plus Floor-Standing Centrifuge was removed from a university lab where it was sur (more)plus to requirements. The unit powers up, but shortly after running it produces error code 7 preventing it from being tested, therefore this item is sold as Spares or Repairs. Error 7 = REFRIGERATION SYSTEM FAILURE There was no apparent drop in chamber temperature thirty seconds after the refrigeration system started to cool. Notify your Thermo Field Service Engineer.

This listing is for 1 of 3 Eppendorf MiniSpin Plus Centrifuge.The unit is in full working condition  (more)and is ready for immediate release.The Eppendorf MiniSpin Plus Centrifuge is a powerful, user-friendly personal microcentrifuge designed for efficient molecular biology separations and quick spins. Its compact design allows each workstation to be equipped with its own centrifuge, enhancing workflow and convenience in the lab.Features:Compact Design: Exceptionally small footprint for efficient benchtop use.High Capacity: Accommodates up to 12 x 1.5/2.0 mL tubes.Powerful Performance: Spins up to 14,000 x g with a fixed-angle rotor.Rapid Acceleration and Deceleration: Achieves maximum speed in less than 13 seconds.User-Friendly Display: Clear digital display for time and speed.Quiet Operation: Remarkably quiet, suitable for sensitive lab environments.Durable Construction: Metal rotor housing for enhanced durability.Safety Compliance: Conforms to IEC 1010-2-020 safety regulations.Convenient Operation: Separate "Short Spin" button for quick sample processing.Temperature Control: Excellent airflow minimizes heating, protecting temperature-sensitive samples.Automatic Lid Opening: Lid opens automatically at the end of the run to reduce handling time.Maintenance-Free Drive: No routine maintenance required.Autoclavable Rotor: Rotor can be sterilized at 121 °C for 20 minutes.Chemical Resistance: Inner centrifuge lid designed to resist chemicals.Specifications:Capacity: 12 x 1.5/2.0 mL tubes (adapters available for smaller tubes)Maximum RCF:MiniSpin Plus: 14,000 x gSpeed Range: 800 to 14,000 rpm (adjustable in 100 rpm increments)Acceleration Time to Max Speed: 13 secondsDeceleration Time from Max Speed: 12 secondsTimer Range:MiniSpin Plus: 15 seconds to 99 minutes, with continuous modeDimensions (HxWxD): 4.7 in. (11.9 cm) x 8.9 in. (22.6 cm) x 9.4 in. (23.9 cm)Weight: 9.5 lb (4.3 kg)

The Frontier 5306 minimizes noise and interruptions in the laboratory: low input voltage power, sile (more)nt brushless motor and a rubber base that absorbs vibrations. Operator safety: rotor imbalance sensor and two safety switches that immediately stop the rotors if the lid remains open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without pressing any buttons. Operation AC power (included) Structure Silent brushless motor, small footprint Construction features Easy to install design Technical features Speed ​​range: 0 rpm – 6.000 rpm Maximum relative centrifugal force: 2.000 g Maximum flow rate (rotor): 8 x 1,5/2,0 ml Program memories: 0 Acceleration gear: 1 Deceleration gear: 2 Lid lock: mechanic Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 1.5 / 2.0ml; Angled 4 x 8 PCR strips Execution time: continuous Safety certification: CE; FCC; TUV The Ohaus Frontier 5306 minimizes noise and interruptions in the lab: low input voltage power, a quiet brushless motor, and a vibration-absorbing rubber base. Operator safety: rotor imbalance sensor and two safety switches that stop the rotors immediately if the lid is left open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without the need to press any buttons. The KIT includes two rotors, described below. Maximum relative centrifugal force (x g) at 2,560 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 45 mm. Maximum relative centrifugal force (x g) at 2,260 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 32 mm. TECHNICAL FEATURES Speed ​​range: 0rpm – 6,000rpm. Maximum relative centrifugal force: 2,000 g. Maximum flow rate (rotor): 8 x 1.5/2.0ml. Program memories: 0. Rotor Pack: 8 x 1.5ml/2.0ml Angled Rotor; angled rotor 4 x 8 PCR strips. Accelerator gear: 1. Deceleration gear: 2. Screen (2): without display. Lid lock: mechanical. Net weight: 1.1kg. Noise level: ≤60 ±2 dB(A). Rotor Compatibility: Angled 8 x 1.5/2.0ml; angled 4 x 8 PCR strips. Rotor recognition method: not applicable. Runtime: Continuous. Safety Certification: CE; FCC; TUV.

Magfuge HEATHROW Centrifuge / Magnetic Stirrer - Gray / Purple New equipment in its original packagi (more)ng 3L centrifuge and magnetic stirrer in one device Part Number: 120581 Dimensions: 23.5 x 18.5 x 12 cm Ambient conditions: Use temperature: 2 to 40°C Weight: 1.85 kg Color: Gray / Purple Stirrer detail: ø plate: 130 mm Stirring capacity: 3 l Speed: 50-999 rpm (increment of 1); 1000-2500 rpm (increment of 5) Timer: Stirring mode -> 30 seconds to 60 minutes or continuous (5 second increment) Oscillation mode -> 1 second to 60 minutes or continuous Oscillation mode -> 30 seconds to 15 minutes Centrifuge detail: Rotor 12 tubes 1.5/2ml or rotor 6 tubes 5ml Speed: 500-999 rpm(increment of 1); 1000-5000 rpm (increment of 5); 5000-12500 rpm (increment of 25) Timer: 30 seconds to 30 minutes (5 second increment) Delivered with : a rotor for magnetic stirring 1 rotor for 12 tubes of 1.5/2 ml 1 rotor for 6 tubes of 5 ml 12 adapters for 0.2 ml tubes 12 adapters for 0.5 ml tubes 2 PTFE magnetic bars 40 x 12 mm 2 silicone mats suitable for the magnetic stirring lid AC adapter

*Item attributes not complete* Thermo Scientific Cellomics Arrayscan VTI Liquid Handling Module w/ S (more)oftware Lab This system was removed from a university laboratory where it was surplus to requirements. The system is in good cosmetic condition and powers up correctly. The software was launched, and the system initialized, but further testing could not be performed at our facility. The system comprises the following: - Thermo Scientific Cellomics Arrayscan VTI Main Unit - Dell Precision Tower 5810 PC with keyboard, monitor, and mouse - Operating System: Windows 7 Pro 64-Bit - Installed Software: Thermo Cellomics HCS Studio - Version 6.6.1 - Brightfield Module

Tecan ST Sunrise Remote F039300 Microplate Reader With software Year of manufacture: 2004 One of th (more)e plastic hinges of the upper flap (location of the microplate) is broken View the photo

Orbital shaker with Ohaus incubator OHAUS Light Duty Incubation Shakers are designed to incubate sam (more)ples and ensure accurate and repeatable results. All models feature independent displays with intuitive controls and include safety features to protect both the operator and the sample. These rugged laboratory instruments have triple eccentric drive systems for stable orbital motion and are equipped with integrated chip control for reliable shaking. - User-controlled temperature calibration function for sensitive applications. Digital control for an adjustable and repeatable shaking speed. - The microplate shaker, with opaque lid for light-sensitive or transparent samples, is designed to hold up to 4 microplates or deep well plates, or for 2 racks for microtubes. Applications Immunological analyzes, hybridizations, cell cultures, suspensions and bacterial and yeast cultures, ELISA tests, PCR, enzymatic reactions Display Independent LED displays with temperature, speed and time information are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum structure with polycarbonate cover and brushless DC motor Construction features Splash resistant construction, overload protection and hot warning indicator Technical Specifications - ISLDMPHDG - Calibration: Temperature calibration - Transmission System: Brushless DC Motor; Triple Eccentric - Safety Certification: CE; TUV - Speed ​​Accuracy: ±2% - Speed ​​range: 100 to 1,200 rpm - Timer: 1 second to 160 hours - Tray structure: Aluminum

Dimensions (ØxH): 520 x 1300 mm Neck (Ø): 40 mm

- Storage capacity (cryobox): 575 - Storage capacity (2ml vials): 57,500 - Bags of plasma: 500 - Pre (more)set temperature: -82°C - Cold/hot temperature alarm limit: -87°C / -77°C Torage capacity (cryobox): 575 Storage capacity (2ml vials): 57,500 Preset temperature: -82°C Adjustable temperature in 0.1°C increments: -86°C to -40°C Cold / hot temperature alarm limit: -87°C / -77°C Withstand over time (from +5°C to +10°C): 1 hour and 18 minutes (from -80°C to -60°C) Climate class (ambient temperature range): +10°C to +43°C Defrost: Manual Type of refrigerant: R290 / R170 External dimensions W x D x H (mm): 992 x 1039 x 1988 Internal dimensions W x D x H (mm): 740 x 713 x 1370 Heat emission (Kcal / h): 426 Compressor running time (%): 50 Ultra low freezers, or deep freezers, are devices intended for storing blood and plasma components, human cells, tissues and other laboratory samples at temperatures as low as -86°C. "U" models reflect the highest and most uncompromising requirements with state-of-the-art technology. The cooling system is optimally designed to allow very low consumption and little heat production. Medical device in accordance with MDR (EU) 2017/745, Class IIa directive THE CONTROL PANEL Extremely easy control of all parameters: - 7" color touchscreen display at eye level - Locking mechanism protected by card reader and password - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - B Universal connected software for remote monitoring, recording and long-term archiving - USB port for easy data export - Alarm memory and history on the monitor with indication of the type - Ethernet interface for data management, via B software, to a PC - Backup battery (duration of at least 48 hours) - Optionally, the possibility of passing data to a db through the network. - Monitor indication of: time, input Volt, login status (user level) SAFETY AND TRANQUILITY Accurate temperature and 24-hour storage: The safety standards developed by B Medical Systems define unique technical features, ensuring the safe storage of preparations and setting the highest safety standards for the user. - Controlled air cooling system for a uniform and stable temperature distribution - Automatic defrost while maintaining a stable temperature - Rapid temperature recovery even after numerous door openings - Safety thermostat to prevent freezing - Long range in case of power failure - Audible and visual alarms with remote alert via SMS or email - °B Connected universal software for remote archive, report (according to FDA 21 CFR Part 1) More than certified tools - European regulation on medical devices: MDR (EU) 2017/745, Class IIa (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - EMC Directive: 2014/30 / EU (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - Low voltage directive: 2014/35 / UE (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - FDA-Medical Device Regulations: 21CFR Part 864.9700, Class II (models: 115-127 V - 60 Hz and 220 V - 60 Hz) - CCSAus certified: Yes (models: 115-127V - 60Hz and 220V - 60Hz) - GMP - Clean room classification: ISO class 6 / EC GMP B ISO class 5 / EC GMP A The 'PREMIUM' line provides you with the most advanced tool you can find. The maximum of technology that you will be able to receive in your laboratory or research center, as well as for the pharmacy and hospital. These models will not serve you best today, but for decades they will remain advanced and modern tools. Tens of years of experience in the design, construction and use, in all conditions, have allowed B Medical Systems to be able to create some of the best instruments on the market. By purchasing this instrument manufactured in Luxembourg, you will save energy each day on the time used for your applications, without risking losing your precious samples. Optimized design for energy efficiency - Often polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum Improved structure and built for everlasting durability - Anti-corrosion structure guaranteed for life - Constructed by rotational molding, in high quality polypropylene for better insulation and strength - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times - Double internal door RTMD | DATI SEMPRE ONLINE WANT EVEN MORE CONTROL? As an option, you can connect your B-Medical-Systems devices to the °B CONNECTED online software. Through this software, via PC or smartphone, you will be able to have a complete overview and management of all your B-Medical-Systems instruments. - Real-time data: temperature, set point, component status, compressor data - All recorded data: alarms, temperatures, exceptional events that occurred during refrigeration - Display and settings of all parameters - Graphic display of temperature curves - Easy graphics to monitor all the devices you own - Incredibly interactive - Customizable data printing - Easy setting of specific alarms, via email or SMS alerts - Data export for third party software - Important advantage in terms of costs compared to a traditional circular paper recorder FEATURES OF VALUE EFFICIENCY - High efficiency natural gas compliant with US SNAP and F-GAS - High performance and low consumption compressor - One-piece printed polypropylene chassis guaranteed for life against corrosion and fully recyclable - Superior insulation - Ergonomic handle with special valve to open the instrument with minimum effort. CONVENIENCE AND COMFORT - Easy access to parameters via 7 'touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for better cleaning - Low noise - Low heat emission - Modular interior equipment - Easy access to the internal drawers-trays - Highest quality stainless steel - Minimal ice formation to allow easy defrosting MULTIFUNCTION ELECTRONICS - Maximum reliability - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal '° B Software' connected for remote monitoring, recording and long-term archiving - Electronic temperature recorder - USB port for easy export of recorded data - Data backup battery Versatile and modular - Full compatibility of internal modules and rails - no need to buy new racks, you can keep previously used racks in different U models - Cryo racks optional ... and much more. Download the data sheet for the data of each model, the standard and optional accessories.

Ultramicrotomo Leica UCT 125. Manufacturing machine knives, table vibration, glass for the manufactu (more)re of blades, and support to make knives. Manual included in attachment. Specifications: - The ultramicrotomo is an instrument commonly used to prepare samples for TEM. Use a glass knife or diamond for cutting ultra-thin sections of specimens included epoxy. - The sections are approximately 60 to 100 nanometers in thickness and 0.5 to 3 mm in width. Were mounted on grids TEM for viewing. - The ultramicrotomo is also used to create a surface mirror-smooth on samples mounted in epoxy, applications for which include images secundariias in the SEM and nanoindexación.