VWR Professional 3500 Inkubator Schüttler Incubator Shaker 65°C 500rpm 444-7085

Laboratory refrigerated incubator with multiparametric microprocessor. Fine temperature regulation,  (more)clear and complete display, top safety class, front regulation of the rear flue. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     2 shelves     Rear flue 45 mm for smoke outlet with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The stove has an independent electronic safety system. The electronic circuit DOES NOT depend on the thermoregulation card and will work even if the main card defaults. ICT-A FALC laboratory incubator

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator This was removed from a universit (more)y lab where it was surplus to requirements. The system is faulty and requires a new controller. It is in otherwise good cosmetic condition with minor marks. It is sold for spares/repairs.

PHCBI Cooled Incubator Type - MIR-154 Lab This item was removed from a university where it was surpl (more)us to requirement. The unit powers up and is in good working order (thermometer not included). It is in very good cosmetic condition internally and externally. This item requires a Passcode to operate which is available on request.

PHCBI Cooled Incubator Type - MIR-154 Lab This item was removed from a university where it was surpl (more)us to requirement. The unit powers up and is in good working order (thermometer not included). It is in very good cosmetic condition internally and externally. This item requires a Passcode to operate which is available on request.

Memmert IF160plus Forced Circulation Incubator 161L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 161 L (5.7 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 161 L (5.7 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF160plus Forced Circulation Incubator 161L, 115V provides precise temperature control with a working range from Min. 10°C above ambient up to +80°C, ensuring reliable environmental conditions for laboratory applications. With a spacious 161 L (5.7 cu.ft.) stainless steel interior, this incubator is designed for easy cleaning and long-lasting use. It features TwinDISPLAY adaptive multifunctional digital PID-microprocessor control, allowing users to adjust parameters like temperature, fan speed, air flap position, and program time with high accuracy, thanks to its two high-definition TFT-color displays. For safety and efficiency, the IF160plus includes AutoSAFETY with integrated over- and undertemperature monitoring, as well as a mechanical temperature limiter TB, ensuring optimal protection for your processes. The Function SetpointWAIT ensures that the process starts only after reaching the set temperature. Additional features include forced air circulation, adjustable in 10% steps, and a sterilization program for chamber cleaning at 160°C for 4 hours. These advanced features make the IF160plus ideal for precision-driven lab environments requiring robust performance. INCLUDED: The Memmert IF160plus Forced Circulation Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

ProMinent Dosing Pump gamma/L Type, Gala 1000NPB200UB000000 This was removed from a university lab w (more)here it was surplus to requirements. The unit is in good cosmetic condition and powers up without issue.

VACUUBRAND MD 4C NT +AK+EK Chemistry Vacuum System Ultimate Vacuum 1.5 mbar Max. pumping speed at  (more)60 Hz 2.2 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and very low vibration - Excellent environmental friendliness due to efficient solvent recovery This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors in chemical, biological and pharmaceutical laboratories. This system is ideal for high vacuum requirements with high boiling solvents. Typical applications are rotary evaporators and drying ovens. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling of solvents and active protection of the environment.INCLUDED: The VACUUBRAND MD 4C NT +AK+EK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

BioSpherix Xvivo System X2 isolated workstation for cell culture work under controlled conditions. M (more)ultiple incubation chambers, with independent O2/CO2/RH programming. The incubation sub-chambers have doors that open into the area for handling with gloves in an aseptic environment controlled by temperature, O2 and CO2. O2 control from 0.1% to 99.9% is possible in each incubator. Low humidity interior atmosphere in the crop handling chamber that reduces the risk of contamination. Heatable interior atmosphere and work surface. Chambers for housing equipment (microscopes, bioreactors, centrifuges, pipetting stations, refrigerators, lyophilizers, cell sorters, robots, FACS, etc.) also with controlled atmospheres. Control of the O2 level also in the SAS or exchange lock for the input/output of material and samples. Software control on a PC for easy documentation and data logging, even allows remote control. Modular and completely enclosed workstation, without requiring the expulsion or extraction of air. Modular system, can be expanded in the future. The BioSpherix X2 closed incubation system is an attractive cleanroom alternative. With the Xvivo System Model X2, good manufacturing practices are easier to achieve, risk is reduced in many ways, and the speed of implementation is much faster and easier. The Xvivo System X2 model, available through its sister company, Biospherix Medical, is designed to process and produce cells in compliance with regulatory GMPs. The BioSpherix Xvivo System Model X2 is the world's only proven modular cytocentric aseptic containment isolator.

Eppendorf 1 x 7-15ml Adapters for F-35-6-30, Cat. # 022654512 The Eppendorf 1 x 7-15ml Adapters for  (more)F-35-6-30, Cat. # 022654512 Adapters are for fixed angle rotor F-35-6-30, and hold round bottom tubes 16 x 75-105 mm. For use with Eppendorf 5430/R centrifuges. This is a two piece set, and the adapters are new in torn packaging. INCLUDED: The Eppendorf 1 x 7-15ml Adapters for F-35-6-30, Cat. # 022654512 includes: - Full 6 Month Parts and Labor Warranty