Memmert IF160plus Forced Circulation Incubator 161L, 115V

This was removed from a university lab where it was surplus to requirements. Both incubators power u (more)p and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order. The incubators are in good cosmetic condition with only minor marks from use. Top:-Model - MCO-20AICSN - 01212236External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm1 Tray - 40 x 29 x 5cm Bottom:-Model - MCO-20AICSN - 60305034External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm

Unused demo product in original packaging. Great condition. 12 months warranty. Features: - User-fri (more)endly microprocessor control - Temperature setting in 0.1 °C
 steps - PID control with automatic troubleshooting during device preparation, for ensuring correct and accurate control at all times - Easy calibration with push buttons - Large, easily readable vacuum fluorescence display - Flexible racks allow efficient use of the chamber volume and can be easily removed for maintenance - Inner glass door allows observation of the samples without significant influence on the chamber temperature - Automatic overheating alarm - Cable bushing with large diameter (42 mm / 1,65 in) for data monitoring - RS232 port for data recollection - High performance security system mit double sensors for maintaining the required temperature during power outages for sample protection - Stainless steel chamber with rounded corners for easy mainenance - FCKW-free/FKW-free polyurethane foam for exceptional temperature values and condensation protection - Temperated door with intelligent energy management decreases condensation (also at lower temperatures) - Timer with week, day and realtime mode - Optional Programming of different temperature ramps Technische Daten: - Temperature range: 5 °C to 70 °C - Inner dimensions (W x H x D): 544 x 1335 x 524 mm - Outer dimensions (W x H x D): 778 x 1545 x 770 mm - Chamber volume: 381 liters - Number of racks included/max: 2/17 - Spatial temperature deviation at 20 °C: ≤ ± 0,3 °C - Temporal temperature deviation at 20 °C: ≤ ± 0,1 °C - Usable area: 0,56 m2 - Rack dimensions (W x D): 528 x 498 mm - Weight load capacity per rack: 30 kg - Weight load capacity device: 75 kg - Weight: 167 kg

Laboratory refrigerated incubator with multiparametric microprocessor. Fine temperature regulation,  (more)clear and complete display, top safety class, front regulation of the rear flue. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     2 shelves     Possibility to set ramps with module and RS232 port (4 programs of 8 steps)     Rear flue 45 mm for smoke outlet with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The stove has an independent electronic safety system. The electronic circuit DOES NOT depend on the thermoregulation card and will work even if the main card defaults. ICT-AR FALC laboratory incubator

Un incubatore da laboratorio refrigerato di grande potenza e affidabilità. Grande dotazione di acces (more)sori e dotato di autosterilizzazione! Regolazione fine della temperatura, display chiaro e completo, classe di sicurezza al top. MATERIALI: - Struttura esterna in lamiera d’acciaio verniciata a forno con polvere epossidica antiacida - Camera interna in acciaio inox - Maniglia ergonomica, facile da usare e robusta DI SERIE: - Termoregolatore PID con doppio display e temperatura regolabile da 0°C a 100°C - Porta interna in vetro - 2 ripiani - Foro 10 mm per - Classe di sicurezza DIN 3.1, la più alta - Ventilazione forzata - Uscita dati RS-485 - Software gestione dati, cavo e adattatore USB di serie - Ciclo di sterilizzazione (160°C per 2,5 ore) Incubatore refrigerato ICT-C 52

Thermo Heraeus B6060 culture and incubation oven. Capacity 57L. Temperature range from room temperat (more)ure + 5ºC to 70 °C.   Stability at 37°C ±°C 0.8. Air regulation adjustment. Digital display. Interior dimensions 403*380*370 mm; exterior 744*552*535mm. 52 kg. Includes 2 shelves. User manual. The Heraeus B-6060 incubator is a high-quality piece of equipment designed to provide a precise and controlled incubation environment. With its uniform heating ability and wide adjustable temperature range, this oven is ideal for incubation applications in laboratories and research centers. It features a digital control system that allows you to easily program and monitor the temperature, as well as a heat-resistant glass door that allows for a clear view of the interior. Additionally, the Heraeus B-6060 incubator is equipped with a safety system that includes temperature alarms and an automatic shutdown in case of overheating. With its compact and durable design, this incubator is a reliable and efficient option for any laboratory that requires precise temperature control during the incubation process.

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab This was removed from a u (more)niversity lab where it was surplus to requirements. The cabinet contains the following items. Aerotech A3200 Ndrive CP x 5Serial#1:577057/7Serial#2:577057/6Serial#3:681834/7Serial#4:681834/8Serial#5:681834/2 All appear to be in really good cosmetic condition with no damage. Two of the units are not inside the cabinet. National Instruments Signal Conditioning Connector Block x 2Model: SC-2345 Both have stickers on the front of the itemsSicker on item 1: pH SensorSticker on item 2: Thermocouples Inlet/Outlet Drive Relays There are other small electrical switches and controllers inside.

REALUX BK 5000 trinocular microscope - 5 objectives New equipment in its original packaging Model: B (more)K 5000 Trino Trinocular head Eyepieces: WF 10X-20 mm Eyepiece diameter: 23.2 mm XY stage: Size 175 x 145 mm, Movement 78x55 mm - Object guide for 2 blades 3W LED lighting 5 plan-achromatic IOS objectives corrected to infinity: IOS PL ACH 4×/0.10 W.D. = 12.10 mm IOS PL ACH 10×/0.25 W.D. = 4.64 mm IOS PL ACH 20×/0.40 W.D. = 2.41 mm IOS PL ACH 40×/0.66 W.D. = 0.65 mm IOS PL ACH 100×/1.25 (oil) W.D. = 0.12 mm

Labconco 600ml Complete Fast-Freeze FlaskComplete Flask consists of 7542800Flask Bottom, 7544400 Fla (more)sk Top and a supply of filter paper.Fast-Freeze Flasks attach withadapters to valve ports on Labconco Drying Chambers and Manifolds. They areavailable in clear or amber-colored glass. A complete Fast-Freeze Flaskconsists of a rubber top, glass bottom and a supply of filter paper.Tops, bottoms and filter paper areavailable separately as replacement components. Adapters are available inborosilicate glass or stainless steel. Fast-Freeze Flasks and Adapters arecompatible with any brand freeze dryer that has 1/2" or 3/4" diametervalve ports.Glass flasks withstand maximumtemperature of 490º C. Flask toppers withstand a maximum temperature of450º C.INCLUDED: The Labconco 7540800 600ml Complete Fast-Freeze Flask includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C-Mag HS 7 Magnetic Hotplate Stirrer Speed Range 100 to 1,500 RPM Heating Temp. Range 50 to 50 (more)0°C Stirring Quantity Max. 10 l Features - Powerful motor for stirring quantities of up to 10 l (H2O) - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Exact temperature setting via digital display (LED) - Bushing according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-Mag HS 7 Magnetic Hotplate Stirrer features one stirring position with a maximum stirring quantity of 10 liters (H2O). It is equipped with a powerful motor with an output of 1.5 W and a speed range of 100 - 1500 rpm. The heat output is 1000 W, and it offers a heating temperature range from 50 to 500 °C. The set-up plate, made of chemical-resistant ceramic, measures 180 x 180 mm. The stirrer includes an LED temperature display for both set and actual values, a turning knob for heat control, and a fixed safety circuit of 550 °C. Additionally, it has a Hot Top indicator for safety and a bushing for connecting an external temperature sensor (ETS-D5). The dimensions are 220 x 105 x 335 mm, and it weighs 5 kg.