New Brunswick Innova 4400 Floor Standing Shaking Incubator Lab

BINDER KB-115 refrigerated incubator / oven with forced convection 100 ° C Model: KB115 refrigerated (more) and ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2021 Tested at 37 ° C and -2 ° C

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Additional Technical Features - ISRK04HDG - Uniformity of ±0.5 at 37°C - Stepper motor drive system - CE safety certification; TUV - Speed ​​accuracy of ±1 rpm - Timer from 1 second to 160 hours

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

Heraeus BB 16 Function Line CO2 Incubator This was removed from a university lab where it was surpl (more)us to requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks.

New Brunswick Scientific Innova 4230 Refrigerated Incubator Shaker Spares/Repair This was removed fr (more)om a university lab where it was surplus to requirements. The unit powers but requires a replacement compressor and recharge as well as a new drive belt. It is sold for spares/repairs.

Corepoint Scientific CPBOD231WSW-0 BOD Refrigerated Incubator Refrigerant R600A Temperature Setpoi (more)nt Range -10C to 50C Capacity 23 Cu. Ft. Capacity Features - 23 cubic feet of space, perfect for accommodating diverse sample types across various fields of study. - Equipped with a variable-speed compressor that ensures exact temperature settings ranging from -10°C to 50°C, ideal for sensitive research applications. - The Proportional Integral Derivative microprocessor with an LCD display allows easy monitoring and precise control, enhancing experimental results. - Utilizes eco-friendly R600a refrigerant and includes a necessary defrost feature at low temperatures, ensuring optimal performance and energy efficiency. - Designed with high-density urethane foam insulation and a white powder-coated steel exterior, meeting EPA standards for a greener footprint. - Audible and visual alarms for power failure, temperature deviations, and door ajar status. The Corepoint Scientific CPBOD231WSW-0 BOD Refrigerated Incubator is expertly designed to provide precise and reliable environmental conditions for a wide range of laboratory applications. Featuring a substantial 23 cubic feet of space, this incubator is ideal for biochemical oxygen demand (BOD) testing and other research requiring controlled temperatures. The temperature can be precisely set between -10°C to 50°C, managed by a Proportional Integral Derivative (PID) microprocessor with an LCD display that ensures optimal conditions are consistently maintained. The unit includes five adjustable wire shelves for customizable storage, shielded LED interior lighting for clear visibility, and a rear wall port for external probe access. Mobility and stability are enhanced with four swivel casters, two of which are lockable. Constructed with a durable white powder-coated steel exterior and high-density urethane foam insulation, it ensures efficient thermal management. Security and monitoring are prioritized with a keyed door lock and comprehensive alarm systems, including audible and visual indicators for power failure, temperature deviations, and door ajar alerts. The incubator uses eco-friendly R600a refrigerant and features a defrost system suitable for low temperatures. With dimensions of 26 7/8" wide, 36 3/4" deep, and 80 1/2" high, this incubator is designed for indoor use in environments with specific temperature and humidity conditions, making it an excellent choice for laboratories seeking reliable and secure environmental conditioning. INCLUDED: The Corepoint Scientific CPBOD231WSW-0 BOD Refrigerated Incubator includes: - Key for Door Lock - 4 Swivel Casters - 5 Adjustable Wire Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

BIOMERIEUX V1222 GRAM POS (+) laboratory pipette 280 µl Fixed volume pipette: 280 µl Not calibrated

Temperature range: ambient +5ºC to 99ºC Temperature display and setting resolution: 0.1ºC Temperatur (more)e stability: ±0.2ºC Capacity: 26 L Unique Set and Forget technology – fast heat-up, accurate temperature control Simple, intuitive controls – quick and easy to set temperature Suitable for use with heat transfer beads Adjustable over temperature alarm – protect samples from over heating Practical front panel lock – disables front panel controls preventing unintentional changes Drain tap included

The EASYSOFT SXT2 consists of a plastic softener tank with internal water distributors. In the integ (more)rated salt storage vessel, brine is automatically prepared for the resin regenerations. Furthermore, the EASYSOFT SXT2 is equipped with an integrated double 3-way bypass valve for decommissioning the water softener while preserving the water supply. On the SXT2 version of this model, a fully automatic control valve (with built-in microprocessor) is mounted on the tank. This ensures the regeneration of the resin. The EASYSOFT SXT2 is also equipped with a mixing device integrated in the control valve to set a residual hardness. The regeneration of this microprocessor controlled water softener can be done in three ways: volume, time and a combination of the two. Capacity: 450 l/h Period capacity (at 10 °dH) min/max: 2.0/3.4 m3 Salt consumption per complete regeneration min/max: 0.7/2.2 kg Resin content per tank: 9 l Salt container content: 25 kg Required water pressure min/max: 2.0/7.0 bar Dimensions (WxDxH): 262 x 463 x 640 mm

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; 4 x ESI Nuclear scaler - timer - ratemeter 2454 x S&J Juniper Standard hotplates with aluminium top plate4 x Farnell Proto-Board 203A solderless bread board2 x Bowens Espirit 500 professional photography lighting flash headElga Elgastat UHQPS water purification systemGenomic Solutions vacuum pump 6035A080Techne TC-3000 FTC3/02 thermal cyclerEriComp Power Block ll system easy cycler4 x Irwin Croydon Type J1 MKlll power supply unitsBayer DCA 2000+ analyserApplied Biosystems 2720 thermal cyclerLabnet Multigene gradient thermal cycler TC9600-G (locked)Thermo Hybaid SPRT001 Issue 2 PCR spring authorised thermcyclerNaiad Technologies DabOut system PN DO-C DO-LVS-CShimbo SMS-200B stroboscopeTechne Dri-Block DB-3A FDB03ADGrant Type QBT2 digital block heaterGrant 38L water bath with GD120 heater-stirrer2 x Grant Type JB1 heated waterbathSorvall TFT 70.38 70,000rpm fixed angle centrifuge rotor 8 x 25mm tubesMitsubishi P93E monochrome thermal printerOerlikon Leybold vacuum exhaust filter AF16LKB Bromma Model 11800 ultramicrotome system pyramitomeJob lot water baths, heater elements and pumps