Cooled Incubator SMART ST5 POL-EKO

This Sanyo Versatile Environmental Test Chamber Model - MLR-351H was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer(not included). The water tank for humidity operation is missing from this unit, therefore it is listed as Spares/Repair. The temperature was first set to 37˚c, when reached, the thermometer read 38.8˚cThe temperature was then set to the maximum temp of 50˚c, when reached, the thermometer read 52.2˚cFinally, the temperature was set to the minimum of 0˚c, when dropped to, the thermometer read 3.1˚c. Inside dimensions - D47 W50 H123cm1 Shelf - 41 x 49cm It is in reasonably good cosmetic condition with marks from use.

Memmert HCP105 Humidity Chamber 107L, 115V Temperature Range Ambient +7°C to 90°C Humidity Control  (more)20 to 95% RH, or no RH Chamber Volume 107L (3.8 cu. ft.) Features - Ideal for climate and temperature testing, including accelerated life and 85/85 tests - Unsurpassed temperature and humidity uniformity across the chamber interior - Easy-to-use ControlCOCKPIT interface and AtmoCONTROL software for intuitive programming - Durable stainless steel construction that’s scratch-resistant and easy to clean - Six-sided heating, including heated inner glass door, to prevent condensation - Aluminum thermal layer for optimal temperature distribution and energy retention - Battery-buffered ControlCOCKPIT and optional MobileALERT for enhanced monitoring - Wide range of customizable test parameters for environmental simulation - Rear-panel feed-through and process runtime delay for precise test control - Comprehensive alarm functions and three-fold overtemperature protection for sample safety The Memmert HCP105 Humidity Chamber 107L, 115V is engineered to deliver precise climate and temperature control, making it ideal for a wide range of environmental and accelerated life tests, including the rigorous 85/85 tests. Offering a temperature range from Ambient +7°C to 90°C and active humidity control from 20% to 95% RH, this chamber creates a stable and highly customizable testing environment with an exceptional homogeneity of temperature and humidity throughout. Designed with Memmert’s user-friendly ControlCOCKPIT interface and the advanced AtmoCONTROL software, it features intuitive “Touch, turn & go” operation, allowing for straightforward programming of complex test parameters. Constructed with robust stainless steel that is scratch-resistant and hygienic, the HCP105 is built to withstand extensive use while maintaining a sleek, easy-to-clean design. Its advanced heating concept includes heating elements on all six sides and a heated inner glass door to prevent condensation and ensure uniform conditions. An integrated aluminum thermal conductive layer aids in maintaining optimal temperature distribution, while also providing a heat reservoir in case of power fluctuations. The chamber’s efficient humidity control prevents condensation buildup, protecting sensitive samples and reducing maintenance requirements. To support continuous and demanding tests, the HCP105 includes various convenience features like a rear-panel feed-through, battery-buffered ControlCOCKPIT for enhanced security, and optional MobileALERT for remote monitoring of alarm conditions via email or SMS. Additional safety features include three-fold overtemperature protection and real-time display of all essential parameters. With comprehensive programming options, reliable alarm functions, and precise environmental simulation, the Memmert HCP105 ensures both safety and accuracy, providing an optimal solution for laboratories focused on climate and temperature testing. INCLUDED: The Memmert HCP105 Humidity Chamber 107L, 115V includes: - 2 x Stainless Steel Perforated Shelves - Water Tank - 2 x Sponge Plugs for Silicone Entry Ports - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICH750L Stability Climate Chamber w/ Light 749L, 115V Temperature Range -10°C to 60°C w/o H (more)umidity (+10°C to 60°C w/ Humidity and/or Light) Humidity Control 10 to 80% RH Chamber Volume 749L (26.5 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Integrated illumination box with programmable daylight (6,500 K) and UV light for precise light control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH750L Stability Climate Chamber w/ Light 749L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH750L is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH750L is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. The ICH750L model includes an advanced illumination box integrated into the upper interior, equipped with fluorescent lamps providing cold white light (daylight: light color 865, 6,500 K) and UV radiation within the 320 to 400 nm spectral range. This setup replicates standard light D65, essential for tests that require precise light conditions. Both daylight and UV light can be individually programmed through the controller, offering tailored adjustment for specific testing needs. Light intensity is maintained with high accuracy, at ± 6% for cold white light and ± 10% for UV light, ensuring consistent conditions for reliable test results. INCLUDED: TheMemmert ICH750L Stability Climate Chamber w/ Light 749L, 115V includes: - Illumination Box - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

ECO G Lauda Series - Refrigerated Thermo-Cryostats LAUDA ECO G cryostats offer reliable technology a (more)nd modern design for temperature ranges from -50°C to 200°C depending on the models. Microprocessor management and integrated cooling system. Gold control heating head (TFT color graphic display and graphic illustration of temperature profiles), with 5 programs and 150 segments each, equipped with mini USB interface. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Examples of specific applications - Sample preparation in chemistry and pharmacy - Functional tests of electronic components - Bearing tests - Beer forcing test - Valve tests - Stress tests - Bending test - Expansion test - Semiconductors Notable features - PID microprocessor management - TFT graphic display with graphic representation of temperature profiles - Alphanumeric navigation menu - Overtemperature protection - Protection class III for operation also with flammable liquids - Pump adjustable to 6 levels - Front adjustment of the external/internal pump power without removing the control unit - USB interface - Possibility to upgrade with various interfaces - Possibility of upgrading with Pt100/LiBus for external control via console - Programmer with 150 segments for 5 programs - Integrated programmer with up to 20 segments - Standard pump connectors - Steel tub - Drain tap Graph of cooling performance of ECO Gold LAUDA cryostats. Performance graph of the pump pressing on the six levels.

Kendro Heracell C02 incubator. Air jacket. Capacity 151 L. Temperature range from ambient + 3ºC to 5 (more)5°C. ContraCon 90 ºC decontamination routine. Constant humidity: =/>95%rH. CO2 control range from 0 to 20% by volume. Overtemperature protection. Stainless steel interior with 3 trays and 2 drip trays. Foil control panel with digital display. Interface RS 232. Dimensions (WHD):  internal 470*607*530 mm, external 637*867*760 mm. Power 230 V. 50/60 Hz. 550 W. User manual. The Kendro / Heraeus HERAcell 150 CO2 Incubator is the ideal CO2 incubator for cell and tissue cultures, including development of ova or embryos at or near body temperature. It provides everything needed to protect and grow the user's samples, including safe and stable incubation conditions to ensure optimum culture growth. HERAcell incubators use a ContraCon 90°C decontamination routine which decontaminates the entire chamber interior and is proven to eliminate mycoplasma as well. Also, they are enhanced with an air jacket to maintain temperature uniformity and quick set-up time, as well as direct humidification which offers the fastest humidity recovery times and provides optimal growth conditions for cultures.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Benchmark Incu-Mixer MP2 Heated Plate Vortexer The new Incu-Mixer MP series by Benchmark Scientific  (more)is designed to provide an optimal method for vortexing and incubating microplates. Simultaneous heating from both the bottom surface and the lid provide temperature uniformity throughout the sample. Additionally, the heated lid minimizes evaporation and prevents condensation. A compact, 2mm orbit ensures thorough mixing in microplates without splashing. Speed, time and temperature are all displayed in real time on the large LCD screen while an internal validation system constantly monitors all parameters for accuracy. Designed for application flexibility, the Incu-Mixer series is available in two, and four-plate capacities. Independent time, temperature and speed controls allow the mixer to function as 3 machines in one; a multi-plate incubator, vortexer, or a combination of the two. The Incu-Mixer MP series is ideal for a wide variety of molecular biology applications including immunochemical reactions, enzyme and protein analysis, and microarray analysis. INCLUDED: The Benchmark Incu-Mixer MP2 Heated Plate Vortexer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato IN-604WMK-115V Programmable Refrigerated Incubator with Window & MK-161 Shaker 143L, 115V (more) Temperature Range -10°C to +50°C Temperature Distribution Accuracy ±1.0°C (refrigerator in continuous operation at 37°C) Chamber Volume 143L Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention (IN604W/804W) - Interior light for better sample visibility (IN604W/804W) - Optional slide shaker table available to put in and take out samples easily (IN604W) Low temperature 143L forced convection incubator applicable for low temperature tests and environmental tests. Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention. Programmable. High accuracy temperature control and temperature distribution. Optional slide shaker table available to put in and take out samples easily. Comes with a compact shaker. Operating temperature range: -10 - + 50° C INCLUDED: The Yamato IN-604WMK-115V Programmable Refrigerated Incubator with Window & MK-161 Shaker 143L, 115V includes: - 3 x Shelves w/ 6 x Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Euromex bScope binocular digital microscope with built-in 5 MP camera, HWF 10x / 20 mm eyepieces and (more) quintuple turret with IOS objectives with infinite oil correction plan PLi 4/10 / S40 / S100x, stage 131 x 152/197 mm with XY stage integrated mechanical 75 x 36 mm without rack. 3W NeoLED ™ Köhler lighting and integrated power supply. Optional phase contrast. BScope microscopes are designed for intensive research use in high schools, universities, small laboratories, and veterinary applications. Euromex bScope DIGITAL BS.1157-PLi_B binocular digital microscope • Binocular model • Head with two observation heights • Integrated color CMOS camera 5,1Mp USB.2 • 2592 x 1944 pixels • 7 frames per second (2592 x 1944 pixels) • 27 frames per second (1280 x 960 pixels) • ImageFocus Alpha software CAMERA BScope digital microscopes are equipped with a 5.1 MP 1 / 2.5-inch USB-2.0 CMOS camera, 24-bit color depth, 7 frames per second (2592 x 1944 pixels) or 27 frames per second (1280 x 960 pixels). The dynamic range is 76 db and signal-to-noise ratio 41 db. Supplied with ImageFocus Alpha software, USB-2.0 cable, and 1mm / 100 part calibration pattern SOFTWARE ImageFocus Alpha capture and analysis software allows you to save images in .jpg, .tif, .bmp, or .dicom formats, as well as videos in .avi format. Measurements and annotations can be made on live or captured images. Compatible with Windows 7, 8 and 10, 32 and 64 bit configurations. Mac OS version available. Free updates can be downloaded

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW