Leica Leitz MDG 17 Transmitted Light Base Durchlicht Stativ Basis Stand 10473849

Ohaus DFD32M2500ES Defender 3000 Drum Floor Scale, 2500 lb., 0.5 lb. Maximum Capacity 2500 lb. (1,25 (more)0 kg) Readability 0.5 lb. (0.2 kg) Platform Size 30 x 30 in. (762 x 762 mm) Features - Weighing, Counting Parts, Checkweighing, Accumulation, Dynamic/Display Hold - Backlit liquid crystal display (LCD) - AC adapter with Auto Shut-off feature - Easy access communication port including RS232 interface - Constructed of mild steel with an epoxy paint finish - Convenient portability with polyurethane wheels - Low-profile design - 2 Year Manufacturer's Warranty

-Helos/BR- HELOS/BR is the shortest model version of the instrument family and finds room on every l (more)aboratory table. It integrates up to 5 optical modules for a measuring range from below 0.1 µm to 875 µm. A multitude of measuring tasks are fulfilled reliably and offers measuring confidence even to the coarser particle range. -Vibri- A constant sample mass-flow is of decisive importance for powerful dry dispersing. The controlled vibratory feeding unit VIBRI, equipped with a built in amplitude controller feeds dry powders from 1 mg to 1,000 g constantly and independent of the load in the VIBRI funnel. -Rodos/M- The classic RODOS with manual adjustment of the dispersion parameters is ideally suited for individual product applications and applications where the measuring parameters remain constant. The precisely reproducible measurement conditions of flash dispersion form the basis for reliable, repeatable measurement results. Simple access to parts that are in contact with the product – particularly the dispersing line – permits quick and easy cleaning and maintenance by the user. -Aspiros- If only small quantities of valuable products or toxic material from a few to 1,000 micrograms are to be analysed, the micro-dosing device ASPIROS can be applied. Size range: 0.1 µm – 875 µm Sample amount: < 1 mg – 1 g Sample volume: 650 µl

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Food scale Valor 4000 Ohaus The OHAUS Valor 4000 Water Resistant Food Scale is an exceptional tool t (more)hat will enhance your workplace beyond your expectations thanks to the winning combination of touchless operation, speed and durability. Valor 4000 has been designed for wet and dry environments, offers two large LED displays, one front and one rear, food safety, trade clearances and anti-puncture keypads. Perfect. - NSF certified, USDA-AMS approved and supports HACCP certified systems: for the most complex food processing applications. - Touchless tare sensor, half second stabilization time, weight control and percentage weighing with colored LED indicators: increased productivity and less stress. - Cut-resistant keyboard and IP68 protection for extreme and wet working conditions. - The unique cut-resistant keyboard and IP68 protection ensure durability and safety, in both extreme and wet working conditions. - Increase productivity thanks to the touchless tare sensor, half second stabilization time, checkweighing and percentage weighing mode with colored LED indicators. - The Valor 4000 model for food applications is NSF certified, USDA-AMS approved and supports HACCP certified systems making it suitable for the most demanding food processing applications. Applications Weighing, percentage weighing, weight control, summation Display LED display Operation AC adapter (included) or rechargeable battery (included) Communication N / A Structure ABS construction with stainless steel platform, front illuminated level indicator, rear touchless sensor Construction features Self-closing power socket cover, menus and messages for navigation in configuration mode on keys, carrying handle

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean &ndash; operator does not touch moisture analyzer&rsquo;s housing. Removing any shocks caused by manual closing of the chamber &ndash; the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and &ndash; thanks to databases &ndash; particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7&rdquo; capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M &ndash; the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D &ndash; the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R &ndash; the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g &ndash; the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M &ndash; the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D &ndash; the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R &ndash; the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g &ndash; the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database &ndash; access to databases Function &ndash; access to basic functions F1 and F2 &ndash; programmable function keys and menu navigation keys Reports &ndash; access to database of drying process reports Profile &ndash; access to parameters settings Sample &ndash; access to products database

E1 class mass standards are characterized by the highest precision in terms of mass. The allowable d (more)eviation from the actual weight is minimal, making standards of this class ideal for applications where every milligram matters. Product Features: Varied Standards: The set consists of 12 wire standards and 15 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 brushes, 2 tweezers and gloves, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are wires.

Jenesco FM-14 Ozone Generator The Jenesco FM-14 Ozone Generator is designed for use in commercial ap (more)plications or wherever high ozone output is needed to reduce odors, mold, mildew, bacteria and for decontamination. The FM14 produces maximum ozone output from ambient air using four silicone composite ozone plates with stainless steel grids. The FM14 has coverage of up to 6000 sq feet for odors, 1000 sq feet for mold. The ozone output is 4000 mgph (milligrams per hour) when used at normal air humidity of 60%. Electrical: 120VAC, 40W, 3A. Made in the USA.INCLUDED: The Jenesco FM-14 Ozone Generator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Large digital display Precise microprocessor control Temperature range: ambient +5°C to 150°C (0.1°C (more) increments) Anodized aluminum block (24x 1.5 mL tubes) Easy user calibration Sigle block model