LEEC Research CO2 Incubator Model GA2000 Lab

Climacell CLC-B2V-M / CLC 111-TV Cooling Incubator This was removed from a working lab where it was  (more)surplus to requirements. The unit powers up and is in full working order. (Thermometer not included). It is in good cosmetic condition with minor marks.

This was removed from a university lab where it was surplus to requirements. Both incubators power u (more)p and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order. The incubators are in good cosmetic condition with only minor marks from use. Top:-Model - MCO-20AICSN - 01212218External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm Bottom:-Model - MCO-20AICSN - 01212221External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm

PHCBI Cooled Incubator MIR-154 Lab This item was removed from a university where it was surplus to r (more)equirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally.

Memmert ICO105 K7 CO2 Incubator w/ Active Humidity Control 107L, 115V Temperature Range Ambient +5° (more)C to 50°C Humidity Control 40 to 97% RH, or no RH Chamber Volume 107L (3.8 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - Allows for direct humidity control from 40 to 97% RH, or no RH - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO105 K7 CO2 Incubator w/ Active Humidity Control 107L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO105 K7 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. With the K7 active humidity option installed, this CO2 Incubator allows for direct humidity control from 40 to 97% RH, or no RH. Further enhancing its functionality, the ICO105 K7 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO105 K7 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO105 K7 CO2 Incubator w/ Active Humidity Control 107L, 115V includes: - 2 x Stainless Steel Perforated Shelves - Water Tank - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA INC 125 FS SP25 Digital Incubator Shaker Temperature Range Ambient +8°C to 80°C Speed Range 10  (more)to 300 RPM Chamber Volume 125L Features - Shaking stroke: 25 mm for optimum oxygen input - The shaker platform can be pulled out halfway (with line indicator) for comfortable and tilt-proof loading - The threaded grid on the platform allows the mounting of fixing clips or STICKMAX adhesive mat for different vessels and sizes - When the door is opened, the shaking function stops automatically - Shaking and temperature control function can be used independently of each other - Simple cleaning of the interior thanks to rounded corners and flat surfaces made of corrosion-resistant material AISI 304 - Decontamination mode for disinfection and reduction of cross-contamination (100/120°C) - Excellent temperature management and optimized energy consumption thanks to very good insulation of the inner chamber and triple-glazed door with window - Internal air circulation can be influenced by electronically adjustable fan speed (0-100%) - Very large LCD display for easy reading - Large viewing window and switchable interior lighting for observation of samples - Counter, timer, and timer auto (temperature-controlled) function to ensure reproducible test conditions The IKA INC 125 FS SP25 Digital Incubator Shaker is the first incubator shaker with a patented removable shaker platform. Without the platform, the unit can be used like a normal incubator. The large inner chamber with a volume of 125 liters offers space for up to 6 grid shelves (without shaker platform). Thanks to high temperature stability and a uniform shaking motion that improves oxygenation, the incubator shaker is the perfect solution for cell cultivation and other microbiological applications. Click Here to View Product Video INCLUDED: The IKA INC 125 FS SP25 Digital Incubator Shaker includes: - Shaker Platform SP25 - IO T 2.10 Wire grid tray, chrome plated (2 pcs.) - Tilt Protection (2 pcs.) - USB A-B Cable - Calibration Certificate at 37°C - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark H3020 Incu-Shaker 20L Stackable Shaking Incubator Speed Range 30 to 300 RPM Temperature Ra (more)nge Ambient +5°C to 60°C Temperature Uniformity ± 0.5°C at 37°C Features - Stainless steel chamber provides premier temperature uniformity - Proven reliable, maintenance-free Incu-Shaker motor drive system - Bright, intuitive touch-screen controls - Instantly change flask clamps with MAGic Clamp accessories - Included pull-out adjustable shelf for static incubations - Stacking capability of up to 2 units - 2 Year Manufacturer's Warranty

Mini heating plates and magnetic stirrers This ruggedly built OHAUS series of small instruments can  (more)heat and mix up to 1,000ml of water on their 102 x 102mm ceramic plate. They are perfect for school labs and other applications that require simple shaking and heating on a daily basis. All models are equipped with a support rod hook with a locking knob that accommodates the optional support rod kit. Stir models include a 38mm PTFE coated magnetic stir bar. Available models: Model with heating: up to 500°C. Fixed temperature model: 500°C. Model with stirring: 500°C. Model with heating and stirring: stirring from 100 to 1200 rpm; temp. up to 500°C. Applications Boiling water, solubilization buffers and reagents, preparation media, concentration samples Operation Detachable three-wire cable and plug (included) Structure Valox armor, knobs with basic controls, 3.8cm stir bar (included with stir models), On / Off toggle switch (fixed temperature models) ___________ Not sure which model to choose? Download the Ohaus Hotplate and Shaker Selection Guide for a quick overview of all available models.

Lauda Eco Gold with Lauda Eco RE 420 Refrigerated Water Bath This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Ohaus AX423N/E Adventurer Precision Balance, 420 g, 0.001 g Maximum Capacity 420g Readability 0.001 (more) g Repeatability (Typical) 1 mg Features - 130 mm stainless steel pan with a 2-second stabilization time - External calibration with GLP/GMP data output and real-time clock - Full-color 4.3" VGA touchscreen with adjustable brightness - USB, RS232, and USB Host connectivity for versatile communication - Customizable user settings, including project IDs and multiple languages Striking theideal balance between inventive features and functional, uncomplicated weighingcapabilities, the Ohaus Adventurer AX423N/E incorporates all of theapplications necessary for routine weighing and measurement activities. With acolor touchscreen, GLP/GMP compliance capabilities, two USB ports, and muchmore, Adventurer AX423N/E is the most complete balance in its class.Click Here to View Product Video INCLUDED: The Ohaus AX423N/E Adventurer Precision Balance, 420 g, 0.001 g includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex SP-UV1100 Spectrophotometer The Scilogex Spectrophotometers are indispensable instruments r (more)outinely used in colleges, universities and research institutes for quantitative analysis in fields including biotechnology and quality control of new material developed. V-Series provides high resolution, high performance and excellent stability. SP-UV1100 Spectrophotometer, 190~1100nm Features: - User Friendly Operation and Information Rich LCD Display: The large 128 x 64 dots, backlit LCD screen with adjustable brightness control displays a large array of data also in graphical format. - On-Board Data Storage: The System can save the test results, up to 200 groups of data and 200 standard curves in the RAM memory. - Data can be restored after a sudden power failure. - Auto setting wavelength: To set wavelength automatically to calibrate the system through arrow keys to avoid operation errors. - Automatic Switching: Tungsten& Deuterium lamps switching is automatic. Selectable from a wavelength range of 190 to 1100nm. - PC control through application software: The spectrophotometer is fully equipped and capable of executing all functions in stand-alone mode. The optional application software 'Wave Professional' provides computer control for the spectrophotometer(through the built-in USB port), apart from other functions such as spectrum scan, Time scan(kinetics), multi-wavelength scanning & Nucleic Acid /Protein measurement. - Large sample compartment: To accommodate 5–100mm path length cuvettes with optional holders. A variety of optional accessories are available. INCLUDED: The Scilogex SP-UV1100 Spectrophotometer includes: - Tungsten Lamp - Deuterium Lamp - 4 x 3.5ml Glass Square Cuvettes - 2 x 3.5ml Quartz Square Cuvettes - Dust Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty