GenLab Incubator Model-INC/150/F/DIG Lab

Infors Multitron HT Triple Stack Incubator This incubator system was removed from a university labor (more)atory where it was surplus to requirements. The units are in good used cosmetic condition with signs of general use. It has several operational issues affecting its performance: Top Unit: - Cooling system and blower heater are faulty. - Temperature settings are inaccurate: - Set to 1.0ºC, read 9.8ºC. - Set to 37ºC, initially correct but now fails to heat. - Set to 65ºC (Max), unable to maintain temperature; reads as faulty. - Shaker speed sensor is faulty, limiting operation to a maximum of 400rpm. Middle Unit: - The unit powers up and was successfully temperature tested, displaying accurate readings when set to 37ºc & 65ºc (MAX). - Shaker speed sensor issues cause erratic operation without displaying current speed. Bottom Unit: - The unit powers up and was successfully temperature tested, displaying accurate readings when set to 37ºc & 65ºc (MAX). - Shaker functions up to 230rpm smoothly; above this, it becomes erratic and displays errors. Given the multitude of issues, particularly with the cooling systems, heaters, and shaker speed sensors across all units, this triple stack incubator is listed for spares or repairs. This setup may require significant repairs, or could be used for parts by those capable of addressing these extensive technical issues.

Nuaire NU-5510E CO₂ Incubator This item was removed from a laboratory where it was surplus to requir (more)ements. The incubator is in excellent cosmetic condition and has been tested for basic functionality. It powers up and is in good working order (thermometer & CO₂ analyser not included). Specifications: - Model: NU-5510E - Serial No.: 153406102512 - Year of Manufacture: 2012 - Temperature Range: 18°C to 55°C - CO₂ Range: 0% to 20% - Features: Four shelves, humidifying pan, operating instructions, as-new door latch and seal

Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V Temperature Range Ambie (more)nt +5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 97L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 97L natural convection incubator with communication port. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IF110plus Forced Circulation Incubator 108L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 108 L (3.8 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 108 L (3.8 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF110plus Forced Circulation Incubator 108L, 115V offers a precise working temperature range starting from Min. 10°C above ambient up to +80°C with 0.1°C accuracy, ensuring optimal environmental conditions for laboratory processes. Its spacious 108 L (3.8 cu.ft.) stainless steel interior is designed for durability and ease of cleaning, making it ideal for routine use in demanding lab environments. The TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, equipped with two high-definition TFT-color displays, allows users to easily monitor and adjust key parameters like temperature, fan speed, and air flap position, all with intuitive control. For enhanced safety, the IF110plus features AutoSAFETY with integrated over- and undertemperature monitoring and a mechanical temperature limiter TB for additional protection. The Function SetpointWAIT ensures the process begins only once the desired temperature is reached, increasing precision. Additionally, the incubator includes a fixed sterilization program, which operates at 160°C for 4 hours to clean the chamber. With forced air circulation, adjustable in 10% steps, and the ability to manage fresh air admixture, this incubator is both efficient and reliable for various laboratory applications. INCLUDED: The Memmert IF110plus Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Recovery time after 30 seconds door open at 37°C: 5 min Temperature fluctuation at 37°C: ±0.1K Tempe (more)rature range: 7°C above ambient temperature to 60°C Temperature variation at 37 °C: ±0.4 K Auto-sterilization with hot air at 180°C Humidity range: 90 to 95% RH Double-pan humidification system with condensation protection CO₂ measurement: IR CO₂ range: 0 to 20 Vol.-% CO₂ CO₂ Recovery time after 30 seconds door open at 5 Vol.-% CO₂: 5 min Dimensions (H x W x D): 1070 x 740 x 715 mm Internal dimensions (H x W x D): 750 x 560 x 500 mm Capacity: 210 litre Weight: 129 kg

Abbott Commander Incubator 8 shelves Type 6210/02

SCALES SUITABLE FOR EVERY USE The Navigator Series is perfect for general weighing applications in l (more)aboratory, industrial, education, retail, commercial, manufacturing, food and portioning environments. A powerful, rugged and multifunctional scale capable of handling a wide range of weighing applications with features such as fast stabilization time, overload protection four times its rated capacity and easy operation. - Excellent value for money - One-second stabilization to improve efficiency, productivity and throughput - Overload protection system, capable of withstanding loads up to four times higher than the nominal capacity: protect the scale from improper use. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Checkweighing: Compares the weight of a sample against the set targets. Other standard features and equipment ABS construction, stainless steel weighing pan, transport lock, menu switch and safety lock for adjustment, non-slip and adjustable feet, bubble level, mechanical and software overload/underload protection, indicator stability, low battery indicator, auto power off, user selectable print options, user selectable communication settings. MODELLI DISPONIBILI Applications Weighing, Parts Counting, Percent Weighing, Checkweighing Display Liquid Crystal Display (LCD) with backlight Operation AC adapter (included) or 4 C batteries (not included) Communication RS232, USB, or Ethernet (available as accessories) Construction ABS housing, stainless steel pan, transportation lock, slip-resistant and adjustable feet, leveling bubble Design Features Menu and calibration lock switch, mechanical and software overload/underload protection, stability indicator, low battery indicator, auto shut-off, user-selectable print options, user-selectable communication settings SUITABLE FOR ANY FIELD AND USE EDUCATIONAL: valuable overload protection system. Additionally, the portability of the Navigator balance makes it ideal for field experiments. LABORATORY: simple to clean, precise and easy to use in the laboratory. Ideal for laboratory applications such as formulation, quality inspection, testing and experimentation. INDUSTRY: Robustness, speed and accuracy, it is ideal to use in medium-light industrial applications such as paint and ink mixing, packaging, sampling and piece counting. SALES, TRADE, AND MANUFACTURING: Rugged, Portable, and Reliable. Ideal for use in shipping and receiving, retail or warehouse environments. Battery operation and counting and checkweighing modes expand the possibilities of use in hobby, inventory management, inspection and quality control. FOOD AND PORTIONING: hygiene, duration and reduced maintenance. Ideal for portioning and in pre-packaging. Units of measure such as kg, g, lb, oz, lb:oz and checkweighing and percentage checkweighing modes enhance their utility at the counter, in prep and in the kitchen.

IKA R 1001 Paddle stirrer Maximum Speed 2,000 RPM Flow Type Tangential Flow Material Stainless Steel (more) Features - Compact 34 mm stirrer diameter, perfect for precise applications - High-quality AISI 316L / 1.4571 stainless steel construction for durability and resistance - Operates within a wide ambient temperature range of 5 - 40 °C for diverse environments - Robust stainless steel build guarantees long-lasting performance - Achieves maximum speeds of up to 2,000 RPM for rapid mixing tasks This high-precision stirrer, with a compact diameter of 34 mm and a 160 mm shaft, is engineered for the meticulous mixing of small volumes. Crafted from durable AISI 316L / 1.4571 stainless steel, it combines lightweight design with robust performance, weighing only 0.018 kg. Its tangential flow mechanism and capability to operate at speeds up to 2,000 RPM ensure efficient and thorough mixing. Suitable for a wide ambient temperature range from 5 to 40 °C, this stirrer is the perfect tool for diverse laboratory applications.INCLUDED: The IKA R 1001 Paddle stirrer includes: - IKA R 1001 Paddle stirrer - Manufacturer's Documentation IKA R 1001 Paddle stirrer SpecificationsStirrer diameter34 mmShaft diameter4 mmShaft length160 mmMaterial in contact with mediumAISI 316L / 1.4571Weight0.018 kgPermissible ambient temperature5 - 40 °C

Thermal transfer printer for Mettler Toledo equipment. Communication via DB25.

Olympus U-ULH Fluorescence Light Source with BH2-RFL-T3 Power Supply Functional lamp with 160 hours  (more)of use For IX Series (Ax - Bx)