Mettler Toledo 8861 Thermal Label Printer

This Parr Isoperibol Calorimeter 240 was removed from a university lab where it was surplus to requi (more)rements. The item is in reasonable cosmetic condition but has plenty of marks from use and age. The item powered on fine and we could interact with the control panel without issue. We attempted to run a test print and were met with Error 3800. We are told this is due to the O2 requirement and is not a fault with the system. The system was serviced in 2020 not long before it came to us. We were unable to test it further. Also included are the following:1x Parr 1755 Printer1x Parr/Star Power SupplyModel: AD8340

Print resolution: 203 dots/inch, 8 dots/mm – 300 dots/inch, 12 dots/mm or 600 dots/inch, 24 dots/mm  (more)Dot size (WxL): 203 dpi – 0.125 x 0.125 mm, 300 dpi – 0.084 x 0.099 mm, 600 dpi – 0.042 x 0.042 mm Maximum print width: 203 dpi – 104 mm Bar code modulus: 203 dpi – 4.9 mil to 49 mil, 300 dpi – 3.3 mil to 33 mil, 600 dpi – 1.6 mil to 16 mil Programmable constant print speeds: 203 dpi – 61, 76 through 254 mm/s in 25 mm increments, 300 dpi – 61, 76 through 203 mm/s in 25 mm increments, 600 dpi – 38, 51 through 102 mm/s in 25 mm increments Media label length: Minimum – 13 mm, Maximum 203/300 dpi – 991 mm, Maximum 600 dpi- 508 mm Media label width: Minimum – 25.4 mm, Maximum tear/cutter – 114 mm, Maximum peel/rewind – 108 mm Media total thickness (including liner, if any): Minimum – 0.058 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m, 3:1 media to ribbon roll ratio – 450 m Ribbon core inside diameter: 25.4 mm Dimensions (HxWxD): 338 x 278 x 475 mm Weight: 15 kg

Print resolution: 203 dots/inch, 8 dots/mm or 300 dots/inch, 12 dots/mm Dot size (WxL): 203 dpi – 0. (more)110 x 0.132 mm, 300 dpi – 0.110 x 0.132 mm Maximum print width: 203 dpi – 108 mm, 300 dpi – 105.7 mm Bar code modulus: 203 dpi – 5 mil to 50 mil, 300 dpi – 3.3 mil to 33 mil Programmable constant print speeds: 51, 76, 102, 127 and 152 mm/s Media label length: Minimum (tear off) – 17.8 mm, Minimum (peel off) – 12.7 mm, Maximum – 991 mm Media label width: Minimum – 19 mm, Maximum – 114 mm Media total thickness (including liner, if any): Minimum – 0.076 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm, 25 mm core – 152 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3.18 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m Ribbon core inside diameter: 25 mm Dimensions (HxWxD): 277 x 242 x 432 mm Weight: 9.1 kg

Dust-free cabinet is applicable as means of protecting the printers against operation in heavily dus (more)ted areas. The airtight shield made of stainless steel protects a printer against defects, and allows for operation in not adapted places.

RS 232 cable for connecting a balance/scale (PUE H315 indicator) to an Epson printer. Standard cable (more) length: 2m Customized cable length (extra charge): 5 or 10m Compatible with: Scales operated by means of PUE H315 indicator Scales operated by means of PUE H315/Z indicator PUE H315 indicator PUE H315/Z indicator

PR523 Ohaus precision balance The PR Series has been designed for competitive performance at an affo (more)rdable price and offers accuracy and repeatability in essential weighing applications in the laboratory, industrial and educational environments. Featuring RS232 connectivity for easy communication, a backlit display and simple interface for smooth operation, the PR Series scales are perfectly designed for your workstation. Applications Basic Weighing, Parts Counting, Percent Weighing Display Backlit liquid crystal display (LCD). Operation AC adapter (included) Communication RS232 (one port included) Framework ABS top housing, removable stainless steel pan, removable glass draft shield with sliding top door, integrated weigh below hook, safety bracket, calibration lock Construction features User selectable environmental filters, brightness adjustments, auto tare, auto dim, user selectable span setpoints, software lockout and reset menu, user selectable communication settings and print options , user-configurable project and user IDs, software overload and underload protection indicator, stability indicator. Learn how to navigate the Ohaus PR Series menu:

This Appligene Etuve Hybrid 91 Hybridisation Oven was removed from a university lab where it was sur (more)plus to requirements. The item powers on and is in a reasonably used cosmetic condition. The rotation works to the dial speed setting. The temperature was tested with a digital thermometer (not included).

Yamato DX-602C Natural Convection Oven 153L, 115V Temperature Range Ambient +5°C to 280°C Temperatu (more)re Distribution Accuracy ± 10°C at 280°C Chamber Volume 153L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-602C Natural Convection Oven 153L, 115V is designed for both economy and efficiency. It features a digital PID controller for straightforward operation, including options like Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven operates within a temperature range of room temperature +5°C to 280°C, maintaining a temperature control accuracy of ±1°C and distribution accuracy of ±10°C at 280°C. It takes approximately 80 minutes to reach its maximum temperature from room temperature. This oven is built with a durable stainless-steel interior and an electro-galvanized steel sheet exterior finished with melamine resin, ensuring longevity and ease of maintenance. It's insulated with glass wool and utilizes a 1.36 kW iron-chrome wire heater. Equipped with two 33 mm exhaust ports on the top, it offers microprocessor controlled PID temperature management with digital setting and LED display options, alongside a versatile timer range. Safety is a priority, with features including self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker with overcurrent protection. The internal dimensions are 600x510x500mm, and the external dimensions are 700x640x830mm. The oven can support a shelf plate load of 15kg and features 12 shelf rest steps with a 35mm pitch. The Yamato DX-602C is an ideal solution for those in need of a large, reliable, and user-friendly convection oven for various applications. INCLUDED: The Yamato DX-602C Natural Convection Oven 153L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus AX423N Adventurer Precision Balance Maximum Capacity 420 g Readability 0.001 g Repeatability  (more)(Typical) 1 mg Features - AutoCal™ internal calibration for precise measurements - 4.3-inch full-color VGA touchscreen with user-controlled brightness - Multiple connectivity options: RS232, USB Host, USB Device - GLP/GMP compliant with real-time clock and selectable communication settings - Stainless steel pan with 130 mm diameter and 2-second stabilization time Striking theideal balance between inventive features and functional, uncomplicated weighingcapabilities, the Ohaus Adventurer AX423N incorporates all of theapplications necessary for routine weighing and measurement activities. With acolor touchscreen, GLP/GMP compliance capabilities, two USB ports, and muchmore, Adventurer AX423N is the most complete balance in its class.Click Here to View Product Video INCLUDED: The Ohaus AX423N Adventurer Precision Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This stainer provides a continuous-feed loading platform that eliminates wasted time associated with (more) batch staining methods. Correct first-time staining means less duplicated work. Pumps deliver fresh reagents in precise volume for every stain while the platen provides uniform stain from field-to-field and slide-to-slide with stain and buffer mixing accurately and uniformly. Slides are immediately available for viewing upon completion of staining, and the rinse reagent contains the optimal alcohol concentration for proper slide drying. Dials, located on front panel, allow for wide variation in stain intensities to suit individual needs. Stains 60 slides per hour. Uses disposable, prepackaged stain, buffer, and rinse solutions. Pilot light indicates when remaining solution is sufficient for only 20 slides. Main functional components are spiral conveyors and three peristaltic pumps. This stainer is simple to maintain.

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. Key features: High precision measurements Stability over Time Calibration and Strict Quality Control Versatility of Applications Cylindrical shape Nominal value: 200 g