Abbott Commander Incubator

This Sanyo MIR 553 Refrigerated Laboratory Incubator was removed from a university lab where it was  (more)surplus to requirements. The unit is in good cosmetic condition with only limited usage marks. It has 4 shelves and a key with it. It powers up and has been tested with a digital thermometer (not included). When set at the lowest temperature of -15ºC our thermometer read 0.8ºC (The unit's internal thermometer read -0.2ºC)When set at 37.5ºC our thermometer read 38.2ºCWhen set at 50ºC our thermometer read 50.6ºC The lamp inside is in working order, but the exterior lamp doesn't seem to work. It may need a new lamp. Interior dimensions:D53cm x W65cm x H128cm

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to + 70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 150 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Capacity of 2 agitator trays; for containers over 180 mm only 1 tray can be used - Temperature stability ±0.2°C - Shaking frequency: 20 to max. 250 min-1 - Stirring width: 30 mm - Usable volume 150 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Amplitude of shaking 25 mm - Load capacity max. 20 kg - Timer from 1 minute to 999 - Vibrating platform width 674 mm - Vibrating platform depth 540 mm - Capacity approx. 150 L / 2 stirring trays - External structure in electrolytically galvanized steel sheet, powder coated

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Scientific Industries SI-1400 Incubator-Genie Shaking Incubator The Scientific Industries SI-1400 In (more)cubator-Genie Shaking Incubator (without plug) offers rotating and shaking capabilities with temperatures from 28C to 75C for applications in gel and blot staining, cell or bacterial culture, or any application that requires mixing, washing, rocking, and temperature control of a sample. Magnetic platform and clip plate system can accommodate almost any container at any angle. Programmable timers and alarms for temperature and/or mixing parameters protect samples from deviation. Chamber air is continuously gently recirculated to ensure temperature uniformity. This incubator is new in the box . In the box: Enviro Genie with 120V line cord (no plug) Magnetic Platform Clip Plates for 10-13mm, 15-17mm, 28-30mm tubes 4 Magnetic Bag Mounting Strips Non-Skid tray Stackable Wire Rack. Includes a Full 6 month Parts and Labor Warranty Scientific Industries SI-1400 Incubator-Genie Shaking Incubator Specifications Rotating Speed 1 to 35 RPM Rocking Speed 6 to 70 cycles per minute Temperature Range 28C to 75C Temperature Stability ±0.1C Temperature Uniformity ±0.5C Temperature Resolution 1.0C Timer Programmable to 99 hours Chamber Volume 24 L (0.86 cu ft) Platform Capacity 4.5 kg (10 lbs) Interior Dimensions (D x W x H) 254 x 362 x 260 mm (10 x 14.25 x 10.25 in) Overall Dimensions (D x W x H) 400 x 560 x 270 mm (15.75 x 22 x 14.5 in) Electrical Requirements 120V, 50Hz, 2.5A

Benchmark SureTemp Dual Convection 70L Incubator The new SureTemp Incubator series provides the high (more)est level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class. Each incubator is equipped with the SureCheck data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping. Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection” technology, allowing users to choose between mechanical convection mode or gravity convection mode. Mechanical convection incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperature. Gravity Convection eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature. The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.INCLUDED: The Benchmark SureTemp Dual Convection 70L Incubator includes: - SureTemp Data Logging Software - Internal Power Outlet - 2 Stainless Steel Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Berthold Technologies Mithras LB 940 Microplate Reader This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but we were unable to test it further without the software. It is in good cosmetic condition with minor marks.

Thermo Multifuge X3 FR refrigerated centrifuge. Maximum speed for oscillating rotors 6000 rpm (7164  (more)xg) and for fixed angle rotors 15200 rpm (25,830 xg). Adjustable temperature from -10°C to +40°C (CFC-free). Timed from 1 to 99 h, 59 min or continuous operation. Programmable and 99 preset programs. (HxWxD) 840*546*670mm; 152.20 kg plus rotor. PDF User Manual. Includes TX-750 oscillating rotor (75003607) of 4 x 1000 ml and maximum speed of 4,700 rpm. (4.301 xg) Acceleration and braking time 65/50 s. - Precooling with direct button. - Maintenance-free induction motor. - Automatic rotor locking system with button. - Microprocessor control. - Internal memory that saves the most recent data. - RCF selection. - Temperature and pre-temperature control. - 9 acceleration curves and 10 braking curves. - Automatic rotor recognition - Recognition of electronic imbalance. - Auto-Lock® III rotor system allowing installation and exchange of rotors with the push of a button. - Automatic lid closure and locking. - Digital display. The Thermo Multifuge X3 FR refrigerated centrifuge is high-quality laboratory equipment that offers exceptional performance. Designed to meet the needs of scientists and research professionals, this centrifuge features a 4 x 1000 ml TX-750 (75003607) swing rotor, allowing large sample volumes to be processed efficiently. Thanks to its advanced cooling system, this centrifuge ensures a constant and precise temperature during the centrifugation process, which is especially important to preserve the integrity of heat-sensitive samples. Additionally, its ergonomic design and intuitive interface make it easy to use and allow for hassle-free operation. Thermo Multifuge X3 FR offers a wide range of functions and features, such as the ability to program different spin profiles, adjust spin speed and time, and select between different acceleration and deceleration modes. In addition, it has a high-resolution LCD screen that clearly displays centrifugation parameters and allows real-time monitoring. It has four with lockable wheels. With its ability to process up to 4 1000 mL tubes simultaneously, this centrifuge is ideal for high-demand applications such as separation of cellular components, protein purification, and sample preparation for molecular analysis. Its robust and durable construction ensures long life and reliable performance. 17 optional rotors In short, the Thermo Multifuge X3 FR refrigerated centrifuge is an indispensable tool in any laboratory that requires efficient and reliable centrifugation. With its high-capacity oscillating rotor and advanced cooling system, this centrifuge delivers exceptional performance and ensures the integrity of heat-sensitive samples. Its ergonomic design and intuitive interface make it easy to use, while its wide range of functions makes it a versatile choice for a variety of research applications.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

Hermle 15ml Conical Insert (2pk) The Hermle 15ml Inserts are for use with the 6 x 85ml Rotor for the (more) Z326 and Z326 K centrifuges. INCLUDED: The Hermle 15ml Conical Insert (2pk) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty