BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Thermo Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. The shaking plate and Rotisserie shaker are both in good working order. It is in good cosmetic condition with minor marks.

Yamato DVS-602C Programmable Natural Convection Oven 162L, 115V Temperature Range Ambient +5°C to 2 (more)60°C Temperature Distribution Accuracy ± 5.0°C at 260°C Chamber Volume 162L Features - Excellent temperature accuracy - Easy to use and maintain - Equipped with a 6 pattern PID program controller with easy program settings (30 steps x 1, 15 steps x 2, 10 steps x 3) - Simultaneous display of set constant and measured temperature - Quick Auto stop, Auto Stop, Auto Start operations - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V offers excellent temperature accuracy and user-friendly operation. It features a 6 pattern PID program controller, capable of executing complex programs (30 steps x 1, 15 steps x 2, 10 steps x 3), and displays both set and measured temperatures simultaneously. This oven operates within a temperature range of room temperature +5 to 260°C, achieving temperature control accuracy of ±1.0°C and distribution accuracy of ±5.0°C at 260°C. It can reach its maximum temperature in approximately 90 minutes. Constructed with a stainless-steel interior and a cold rolled steel plate exterior with a melamine resin baking finish, the DVS-402C is easy to maintain. It features glass wool insulation, a 1.2kW stainless pipe heater, and includes an observation window made of chemically strengthened glass. Additional features include a cable hole, exhaust ports, a comprehensive timer, and various operation functions like Auto Start, Auto Stop, and Quick Auto-stop. Safety is ensured with self-diagnostic functions and an electric leakage breaker with overcurrent protection. The internal dimensions are 450×490×450mm, external dimensions are 560×601×820mm, and it can support a shelf plate load of about 15kg. The DVS-402C is ideal for precise, programmable heating applications. INCLUDED: The Yamato DVS-602C Programmable Natural Convection Oven 162L, 115V includes: - 2 x Stainless Steel Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF75 Forced Circulation Oven 74L, 115V Working Temperature Range Min. 10°C above ambient up (more) to +300°C Oven Type Forced Air Circulation Chamber Volume 74 L (2.61 cu.ft.) Features - Setting temperature range from +20 to +300°C with a working range of at least 10°C above ambient up to +300°C - Internal volume of 74 L (2.61 cu.ft.) for versatile applications - Precise control with a 1 Pt100 sensor DIN Class A in a 4-wire circuit and 0.1°C setting resolution up to 99.9°C - ControlCOCKPIT with adaptive digital PID-microprocessor control and a high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps for optimal temperature distribution - Easy-to-clean stainless steel interior with reinforced ribbing and integrated heating on four sides - AtmoCONTROL software for data logging and program management via USB or Ethernet interface - Fully insulated stainless steel door with 2-point locking and inner glass door for secure access The Memmert UF75 Forced Circulation Oven 74L, 115V is designed for precise and reliable temperature control, making it ideal for a variety of laboratory and industrial applications. It features a setting temperature range of +20°C to +300°C, with a working temperature range of at least 10°C above ambient up to +300°C. Equipped with a high-definition TFT-color display, the ControlCOCKPIT system offers adaptive digital PID-microprocessor control for seamless operation. The oven incorporates a 1 Pt100 temperature sensor in a 4-wire circuit, ensuring accurate monitoring and control with a resolution of 0.1°C up to 99.9°C. For added flexibility, users can adjust critical parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, and even set time zones and daylight savings time. This model is engineered for efficiency and durability, featuring forced air circulation with a quiet air turbine adjustable in 10% increments to maintain uniform temperature distribution. The easy-to-clean stainless steel interior is reinforced with deep-drawn ribbing and protected large-area heating on all four sides, offering long-term reliability and hygiene. The oven includes two stainless steel grids and can accommodate up to six shelves, each capable of supporting up to 44 lbs (20 kg). For added convenience, the AtmoCONTROL software allows for data logging, programming, and transferring programs via USB or Ethernet. With a fully insulated stainless steel door with a 2-point locking system and inner glass door, the Memmert UF75 ensures secure and energy-efficient operation for any professional environment. INCLUDED: TheMemmert UF75 Forced Circulation Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN110 Natural Convection Oven 108L, 115V Temperature Range Ambient +5°C to 300°C Convection (more) Type Natural Convection Chamber Volume 108 L Features - 108 L (3.8 cu.ft.) chamber volume for flexible sample accommodation - Temperature range from +5°C above ambient to +300°C for diverse applications - 1 Pt100 sensor DIN class A in 4-wire circuit for precise monitoring - SingleDISPLAY with digital PID-microprocessor controller and high-definition TFT-color display - Natural convection system for even heat distribution - Electronically adjustable air flap for controlled fresh air admixture - Corrosion-resistant stainless steel interior with integrated heating on all sides - Supports up to 5 grids, with a max chamber load of 386 lbs The Memmert UN110 Natural Convection Oven 108L, 115V provides precision and reliability for diverse laboratory applications with its spacious 108 L (3.8 cu.ft.) chamber and temperature range from +5°C above ambient to 300°C. Featuring a SingleDISPLAY digital PID-microprocessor with high-definition TFT display, this oven allows for precise control, while the Pt100 sensor ensures accurate temperature monitoring. Its natural convection system evenly distributes heat, complemented by an electronically adjustable air flap for optimized airflow. Built with a corrosion-resistant stainless steel interior and capable of supporting up to 5 grids with a maximum load of 386 lbs, the UN110 is engineered for durability and efficient performance. INCLUDED: The Memmert UN110 Natural Convection Oven 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Vinitex Plinth Cabinet for Fume cupboard with Wheels behind 550x520x810

*Previously sold item, recently found in the stock count.* This Sanyo MDF-U74V VIP Series Ultra Low  (more)Temperature Freezer was removed from a university lab where it was surplus to requirements. The unit powers up and achieved -80˚C in testing. We left it on overnight. It is in good cosmetic condition with some minor marks from use. Internal dimensions - D58.5 W87 H140cm3 Shelves - 53.5 x 85.5cm

IKA RV 10 Digital V-C Rotary Evaporator Features - 4L Heating Bath with optimized heating bath volum (more)e allowing for fast-heat up - Left or right flask rotation with a speed range of 20 to 270 RPM - Features smooth start function along with a timer function - RS-232 digital interface for remote control and IR interface - Easy and safe operation due to ergonomical design of the user interface Motorized lift with Safety-Stop function, which lifts the receiving flask from the heating bath in case of a power failure Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy flask exchange Safety temperature circuits are featured, along with Dry-run protection for an adjustable lower end stop and lock function for the heating bath The RV 10 digital represents the continual enhancement ofthe IKA RV 10 Rotary Evaporator line. The unit comes with a new universalheating bath, vertical glassware, state-of-the-art safety features and digitalconnectivity. The RV 10 digital is a robust and reliable lab companion. Itsoptimized bath volume allows for fast heat-up times. The condenser unit hasspecial designed glass tubes that utilize the 1500 cm² surface extremelyefficient. That’s why the RV 10 digital delivers reliable and reproducible processresults that are usually reserved for more costly systems. Additional featuressuch as smooth start, left-right interval or timer function capability supportthe user in their daily lab work. Another important aspect of the RV 10 digitalare the sophisticated safety features. The motorized lift has an automatedlift-out function in case of power outage to prevent superheating of thesolvent. Safety temperature circuits can be set individually. Dry-runprotection, adjustable lower end stop and lock function of bath settingcomplete the line of safety features. Furthermore, IKA offers a choice ofcoated glassware for increased safety needs. The RS 232 interface allows forremote control via IKAs “labworldsoft”. The Heating bath is controlled via theIR interface from the main unit. INCLUDED The IKA RV 10 Digital V-C Rotary Evaporator includes: - RV 10 digital - HB digital S099 Heating Bath - RV 10.910 Glassware vertical coated - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - RV 3.4 Woulff bottle - RV 3.1 Support pole - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 10 Digital V-C Rotary Evaporator Specifications Type of coolingverticalCooling surface1500 cm2Motor principleDCSpeed range5 - 280 rpmReversible direction of rotationyesLiftMotorStroke 140 mmHeating temperature rangeroom temp. - 180 °CHeat output 1350 WSet temperature resolution1 ±KFilling volume max. 4 lTimeryesDimensions (W x H x D)500 x 430 x 440 mmWeight32.67 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesVoltage220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 VFrequency50/60 HzPower input1400 WComparison of ModelsSpecificationRV 10 Auto Pro V-CRV 10 Auto V-CRV 10 Digital V-CRV 3 V-CRV 8 V-CType of CoolingVertical CondenserVertical Condenser CoatedVerticalVerticalVerticalSpeed Range5 - 300 rpm5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorMotorManualManualStroke140 mm140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CVacuum Controller IntegratedYesYesN/AN/AN/ATimerYesYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight52.65 kg31.56 kg32.67 kg22.31 kg26.07 kgRS 232 InterfaceYesYesYesN/AN/AUSB InterfaceYesYesYesN/AN/AVoltage100 - 240 V100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }Request a Formal Quote

Gilson Pipetman Neo P20N PipetteFeatures - Redesigned tip ejector and ejection springs reduces tip e (more)jection forces - Unique clip ejector fits securely into the body of the pipette to avoid slipping over time - PVDF handle limits the transfer of heat from hand to the pipette and is resistant to aggressive chemicals - Stainless steel tip ejector resists corrosion and offers a smooth tip ejection stroke - Color-coded push-button for ease of identification - Unique tip holder allows for a secure fit of most brands of tip - Models P2N and P10N incorporate dual position tip ejectors, allowing the use of D10 (short) and DL10 (long) Quick and user-friendly maintenance allows for less downtime and longer product lifetime With pipettes ranging from 0.2µL up to 10mL, the Gilson Neo line has you covered Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Neo offers uncontested durability and reliability. PIPETMAN Neo is performance and precision exemplified. It provides all the benefits that built the reputation of the legendary PIPETMAN Classic, with the added bonus of increased comfort. Easy to use, you will especially appreciate the smoothness of the piston stroke. With uncontested reliability and durability, PIPETMAN Neo is the economical solution to years of pipetting comfort. PIPETMAN Neo is the new comfortable generation of the PIPETMAN Classic that minimizes required pipetting forces for smooth and easy daily use. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman Neo P20N Pipette includes: - Operator's Guide - 1 Year Manufacturer Warranty Gilson Pipetman Neo P20N Pipette SpecificationsModelP20NCat # F144563 Volume (ul)2 1020Max. Permissible Systemic Error (ul)± 0.10± 0.10± 0.20Max. Permissible Random Error (ul)≤ 0.030≤ 0.050≤ 0.060Comparison of Neo PipettesP2NP10NP20NP100NP200NP1000NVolume (ul)0.2 0.5 21 5 102 10 2010 50 10020 100 200100 500 1000Max. Permissible Systemic Error (ul)± 0.024 ± 0.025 ± 0.030± 0.025 ± 0.075 ± 0.100± 0.10 ± 0.10 ± 0.20± 0.35 ± 0.40 ± 0.80± 0.50 ± 0.80 ± 1.60± 3.0 ± 4.0 ± 8.0Max. Permissible Random Error (ul)≤ 0.012 ≤ 0.012 ≤ 0.014≤ 0.012 ≤ 0.030 ≤ 0.040≤ 0.030 ≤ 0.050 ≤ 0.060≤ 0.10 ≤ 0.12 ≤ 0.15≤ 0.20 ≤ 0.25 ≤ 0.30≤ 0.6 ≤ 1.0 ≤ 1.5.comparison-table tr td:nth-child(4) { background-color: #fffacd;}

Boekel Scientific 115004 Block Heater w/Touch Screen, 4 Block, 115V The Programmable Heating Blocks  (more)are designed for precise controlling of sample temperatures. Heating Blocks, also known as dry bath incubators, use aluminum inserts to suit the use of many types of laboratory test tubes, plates, and containers. Boekel programmable heating blocks are designed to be used with standard aluminum dry blocks (nominally 3” deep x 3 ¾” wide x 2” high) of varying configurations for heating test tubes, microtubes, and other small vessels. The Programmable Heating Blocks use an advanced touch screen control system to create and store programs. Programs can have a maximum of five different temperature steps and there is a repeat function for thermal cycling procedures. An option external temperature probe is available for spot temperature checking and controlling the unit temperature. *Block sold separately* Features •Readily Recognizable Icons to Start, Stop and Pause Temperature Control on a Bright Color Touch Screen •Save up to 25 Programs for Rapid Sample Processing •One, Two, and Four Block Models to Fit Your Workflow •Slim Design to Conserve Bench Space •Optional External Temperature Probe •UL, CE, CSA approved Modern laboratories require modern equipment to reduce repetitious procedures and increase accuracy and throughput. The Boekel Scientific’s programmable heating blocks are designed to accommodate the most basic sample incubation procedures to multi-step heating processes and thermal cycling procedures. The slim One, Two and Four block design allows for more bench space and a configurable work flow. The optional external temperature probe is great for spot checking temperatures or controlling block temperature based on the actual sample temperature.Click Here to View Product Video INCLUDED: The Boekel Scientific 115004 Block Heater w/Touch Screen, 4 Block, 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty