BioMerieux Chemunex Chemscan RDI Advanced Flow Cytometer Lab

The HORIZON system from Halo Labs employs Backgrounded Membrane Imaging (BMI) technology to measure  (more)and characterize subvisible particles in a high-throughput, low volume format. BMI has its roots in membrane microscopy – a USP lot release method that images particles on a membrane surface. The fully automated, fluidics-free HORIZON system utilizes disposable membrane plates and automated image processing to rapidly generate reliable and accurate particle counts and sizing. It can perform particle characterization in up to 96 samples in a single run using as little as 25 µL per sample. BMI is also insensitive to solution refractive index, enabling reliable measurement of translucent protein aggregates. The HORIZON system uses sophisticated imageprocessing techniques to analyze images and acquire particle data. The key is to first take a background image of the membrane. After samples are filtered through by vacuum and the particles are captured, the same membrane is re-imaged with sample particles on the surface. The sample image is precisely aligned with the background image and then processed pixel by pixel so that the background texture is eliminated, and particles are viewed in high contrast. Backgrounding the image leads to high reproducibility and minimal interference from membrane texture and imperfections.

The FACSCanto II system is an easy-to-use benchtop analyzer that delivers proven performance, accura (more)cy, and high-quality results. The FACSCanto II can be configured with two or three lasers to detect up to eight colors. It features many innovations, including a true fixed alignment flow cell to minimize startup time and improve  reproducibility. The optical system maximizes signal detection and increases sensitivity and resolution for each color in a multicolor assay. These and other capabilities make the BD FACSCanto II ideal for today’s busy clinical lab, providing a high degree of automation and quality control. With optimal reproducibility, the FACSCanto II system reduces hands-on technician time and costs associated with repeat testing. Lasers: 405-nm solid state diode, 30-mW fiber power output 488-nm solid state, 20-mW laser output 633-nm HeNe, 17-mW laser output Laser Configuration: Spatially separated beams with 9 x 65- μm elliptical spots Optical Alignment Procedure: Fixed, no operator alignment required Flow Cell: 180 x 430-μm rectangular quartz flow cell Collection Optics: Optical-gel coupled 1.2 NA lens FSC Resolution: 1.0 μm SSC Resolution: 0.5 μm Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT FSC Detector: Photodiode with 488/10 BP SSC Detector: PMT with 488/10 BP Fluorescence Detectors: 8 PMTs in 4-2-2 configuration Violet Laser Dyes: Pacific Blue, AmCyan (455, 488 nm) Blue Laser Dyes: FITC, PE, PerCP or PerCP-Cy 5.5, PE-Cy 7 (525, 575, 678 or 695, 785 nm) Red Laser Dyes: APC, APC-Cy7 (660, 785 nm) Detector Bands: Violet Laser: 450/50; 502 to 525 nm Blue Laser: 530/30; 585/42; >670; 780/60 nm Red Laser: 660/20; 780/60 nm Fluorescence Threshold Sensitivities: FITC <100 MESF; PE <50 MESF Max Particle Size: 50 μm Sample Flow Rate: 10 μL/min to 120 μL/min Sample Acquisition Rate: 10,000 events/second, 6 compensated fluorescence parameters and 2 scatter parameters Sample Dead Volume: 30 μL (BD Falcon tubes 12 x 75-mm) Dimensions (DxWxH): Cytometer: 610 x 910 x 640 mm Fluidics cart: 610 x 790 x 640 mm Weight: Cytometer: 145 kg Fluidics cart: 51 kg

This Millipore Guava EasyCyte 8HT Flow Cytometer was removed from a university lab where it was surp (more)lus to requirements. The system powers up and is in good cosmetic condition with only minor marks from use. The unit has been tested with samples but was showing readings of 200-300 when it should be showing readings of around 50000. We were unable to diagnose the exact fault. The unit has a Dell Optiplex 7010 PC paired with it. The PC includes a keyboard, mouse, monitor, USB and VGA Cable. It has had a brand new copy of 32bit Windows 7 installed. Guavasoft 3.1 has also been installed, which includes:ViaCount.InCyte (This requires an unlock code from Millipore to run).easyCheck.Guava Clean 3.1. We have been able to open and close the sample tray. This proves that the system is fully connected. It is sold for spares/repairs.

This GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System was removed from a university (more) lab where it was surplus to requirements. The microscope focus motor/Z-Drive has been removed from this unit. We have removed the microscope focus motor/Z-Drive from this system. It is sold for spares/repairs. Included in the system are; 1x GE IN Cell Analyzer 1000: Dims: L85cm&nbsp;W70cm H70cmThe unit is in good cosmetic condition. When connected up to the power supply we could not hear the unit power on.Inside the unit it appears have been tampered with as there are several cables and connector cables not attached to anything the EARTH cable is also not attached. A circuit board has been removed from the unit. this may explain why we could not get the unit powered up. 1x GE IN Cell Analyser 1000 Kinetic OZ EnabledModel No. 28-4051-29System No. 1316043The unit&nbsp;powers on and is in good cosmetic condition.The fans are working, they can be heard powering up immediately once the unit is powered on. 1x GE IN Cell Analyser 1000 ENDPNT OZ EnabledModel No. 28-4051-28System No. 1358008The unit powers on and is in good cosmetic condition. The unit appears to have been stripped only 1x HP Workstation 6200 PC and 1x&nbsp;MVP Series power supply were still inside it. The Kinetic OZ Enabled unit appears to be complete with an Optigrid light imaging system. We have fitted the GE IN Cell Power supply back into the rack unit where it should be housed. EMKA Keys:Model 2233X2x keys for GE IN Cell Analyser 1000 ENDPNT OZ Enabled2x keys for the GE IN Cell Analyser Kinetic OZ EnabledAll 4 keys are in good cosmetic condition and open and lock both the Kinetic and the ENDPNT units. We did not connect up the GE IN Cell 1000 to the GE 1000 Kinetic OZ Enabled unit as one of the communication cable connections at the back of the rack has come away and will need to be fixed back on. Without this being fixed we do not believe the systems to be aware of each other. 1x Optigrid Light Imaging System:Model QIOPTIQThe unit powers on and is in good cosmetic condition. 1x Xenon ARC Lamp Power supply w 2x keys:Type 6Part No. 56409187The unit powers on and is in good cosmetic condition. The keys do not fit in the barrel well and do not turn. The LCD screen is working and reads clearly. Keys:model No. 901The units are in good cosmetic condition 2x MVP Series Power supplies. ( 1x in each rack unit)Model Nos. MP8-3Q-1L-00Both units power on and are in good cosmetic condition. There is dust around and on both units from general use. 1x Hamilton power supplyModel No. 231352/00The unit powered on and is in good cosmetic condition. 2x APC rack PDUThe units power on and are in good cosmetic condition. 1x GE cO2 Controller:Ser No. 1352436The unit powers on and is in good cosmetic condition. The LCD screen is working and reads clearly. All dials and switches appear responsive to the unit. 2x Hewlett Packard PC's: HP workstation xw6200:The units both power on and&nbsp;are in good cosmetic condition.There is some dust around the units from general use. Programs on PC:•Overlord 2Version 2.1.0.0 •IN Cell Analyser 1000 3.5•IN Cell Analyser 1000 3.6The program is password protected and we could not get past this window to access other parts of the program. 'Shutter Counter 1984048'. 3 x Low Voltage Computer Cables:•28-4060-63 Umbellcal Axis 0734•28-4060-66 0647•28-4060-68 Umbellcal Hamilton 0738 1x Xenon lamp Bulb:Model OSRAM XBO 100W OFRThe box had been opened. We cannot confirm if this lamp has been used. The unit was in good cosmetic condition.

Miltenyi Biotec CliniMACS Plus Cell Sorter Separator Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility. Serial No. 002599Manufactured&nbsp;April 2022

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: 25 – 200°C Temperature stability (at 70°C): ±0.02°C Maximum pump flow: 10 l/min M (more)aximum pump pressure: 0.2 bar Internal dimensions (HxWxD): 200 x 285 x 490 mm Dimensions (HxWxD): 410 x 360 x 590 mm Equipped with a height adjustable submersible platform Platform dimensions (WxD): 250 x 295 mm Height adjustment: 180 mm

Hounsfield H20K-W Tensometer w/ PSU &amp; Various Parts This item was removed from a university lab  (more)where it was surplus to requirements. It powers up and is in good cosmetic condition. All additional parts and accessories included: Hounsfield Test SpecimenCode Ref: E Hounsfield Test SpecimenCode Ref: L Hounsfield Test SpecimenCode Ref: B Hounsfield Test SpecimenCode Ref: B Hounsfield Test SpecimenCode Ref: A Hounsfield Test SpecimenCode Ref: N/A Tensometer Plastic Test Specimen x 2Code Ref: PL. 4 Torsion SpecimensCode Ref: TR1021 Tensile Test Specimen Polymer RangeCode Ref: PL1 Tensile Test Specimen Polymer RangeCode Ref: PL6 Tensile Test Specimen Polymer RangeCode Ref: PL5 Tensile Test Specimen Polymer RangeCode Ref: PL2 Tensile Test Specimen Polymer RangeCode Ref: PL10 Tensile Test SpecimenCode Ref: PL12 Tensile Test Specimen Polymer RangeCode Ref: PL8 Monsanto Tensometer Guage Monsanto Quick-Grip Chucks Chucks for test pieces

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7&rdquo; graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Microtips for the SFX Sonifier are available in four sizes to handle volumes up to 150 ml. The micro (more)tips are also designed to process samples in the smallest diameter vessels. This tip is for use with the Branson 150 watt SFX and SLPSonifier only. Processing Volume 10 - 150 ml Tip Diameter 1/4 in (6.4 mm) Approximate Length 4 in