BD Becton Dickinson LSR II Flow Cytometer Lab

Beckman Coulter MoFlo XDP Cell Sorter Laser Cytomation System + Optics Table Lab This system was rem (more)oved from a university where it was surplus to requirement. It is in good cosmetic condition, the working condition of each unit that we were able to test is listed below. Parts of the system:- Optics Table - MoFlo Optical BenchSN - 2086Dimensions - L153 W122 H80.5cmMeasurement - Imperial Parts fitted on table:- Pressure Console UnitSN - 2086 Coherent SapphireModel - Sapphire LP USB CDRH Driver Unit w/displayPN - 1189089SN - LDP.1189089.C02070- Powers on Coherrent Sapphire 488-200 CW CDRHPN - 1137970SN - LDP.1137970.521683Heatsink Sapphire LP RoHS compl- NOT TESTED Coherrent CubePN - 1170509SN - C20010803- NOT TESTED Coherrent CubePN - 1193821/AASN - C14070901- NOT TESTED Hamamatsu Parts:-H957-27 (No.T0050)H957-18 (No.K0149)H957-27 (No.T3721)H957-25 (No.S0319)H957-25 (No.S0360)H957-25 (No.S0359)H957-25 (No.S0322)H957-25 (No.S0324)H957-27 (No.T0051)H957-27 (No.T0054)H957-25 (No.S0358)H957-25 (No.S0321)H957-25 (No.S0323) Smart Sampler 2 x Preamplifier UnitsSN - 2086 DTx Data Display 19" LCD w/TouchscreenBCI PN - B44222DTx PN - 90819SN - BCM0514F37003- Powers on via Miami MoFlo XDP Controller Under table units:- DTx BCI Miami MoFlo XDP ControllerDTx PN - 90692BCI PN - B20566DTx SN - BCM0915F44602- Powers on - When powered up, an error message reads 'OdinInstControl::connectMachine failed: AttachedInstrument::GetInstance:Repository had communication error!' Gast Vacuum PumpDOA-P501-BN- Powers on Intellipower UPSModel - IQ200V-C-DiAC-Isol-PFCSN - 2FKVDIFC5B15110524- Powers on Beckman Coulter Aerosol Evacuation System Buffalo Filter w/ PedalModel - 200-0179SN - 502135Has ViroSafe Filter fitted (PN-200-8166)- Powers on. 3 x 316L UM Alloy Products Corp Pressure Vessels:-SN - S533735-1-005 (2014)SN - S514233-1-011 (2010)SN - S507165-1-008 (2008) Other units:- Thermo Scientific Recirculating Water BathControl - C10 Type - 003-5009/SN - 1 08004133017Bath - K20 Type - 002-4276/SN - 08004052 003- Powers on Testing:-37˚c - Thermometer read 37.6˚c100˚c - Thermometer read 100.0˚c-20˚c - Thermometer didn't read lower than -13.5˚c Jun Air CompressorType - OF302-25MQSN - 0119802962- Powers on with compressor running Hours - 00898.3 Other spare bits:-1 x Black Case of various filters1 x Black Case containing 3 x Merlin Gerin fuses, Methanol & Acetone2 x Sets of Spare Shaped Charged Plates (one pair boxed)1 x Box of Filters1 x Box of mixed size O-ringsRed Ethernet cable5 x IEC Extension cables

MoFlo Astrios EQS Cell Sorter in BSL Hood. All units are in good used cosmetic condition. The system (more) powers up as it should. We were informed by the lab that the Red laser is faulty and requires replacement. The unit has the following lasers installed: 1 X 640NM - 106MW.1 X 561NM - 202MW.1 x 488NM - 200MW.1 X 405NM - 55MW. The writing is quite faint on the MW output, so the above figures might not be 100% correct. The complete system consists of: 1 x Baker Company SG503HE-BC-INT SterilGARD hood.Manufactured 09/30/2013. 1 x Moflo Astrios EQS Main Unit.The unit has various marks and scratches from general use.Powers up fine. 1 x Moflo Astrios Lower/Laser/Computer Section.The laser & computer system powers up fine. 1 x Thermo/Haake SC100/A28 re-circulator/chiller.Powers up fine. 1 x Intellipower UPS.Powers up fine. 1 x Jun-Air OF302 Silent Air Compressor.It was noted by the lab that this is quite loud. We powered it on and it sounds normal for one of these units. Also includes various spares and accessories shown in pictures.3 x '100' spare nozzle tips8 x '70' spare nozzle tips.

Chemometec A/S NucleoCounter NC-200 Automated Cell Counter System Lab This system was removed from a (more) university lab where it was surplus to requirement. Both the Chemometec A/S NucleoCounter NC-200 and Laptop are in very good cosmetic condition and powered up, we are unable to test them further at our facility. Please note that this system does not include the software required to operate but the original laptop is included as it may have useful hardware. Nucleocounter C-200Serial No. 9000201112003522 Lenovo Thinkpad T15 laptopWindows 10 operating systemSerial No. PF-2J9PPX Also includes the following: Included:2 x Low-voltage power supplies1 x Data lead

Address the full range of current and future multi-parameter cellular analysis research needs with t (more)he NovoCyte flow  ​cytometer. ACEA brings researchers high performance flow cytometry at a low investment cost with the NovoCyte platform. Lasers: Blue 488 nm, Red 640 nm Detectors: 530, 585, 675 nm Laser Configuration: Spatially separated beams with 10 x 80 μm elliptical spots Optical Alignment Procedure: Fixed, no operator alignment required Flow Cell: 170 x 290 μm rectangular quartz flow cell FSC/SSC Resolution: FSC < 0.5 μm, SSC < 0.2 μm Cell Size: 0.2 – 50 μm Fluorescence Threshold Sensitivity: FITC < 75 MESF, PE < 50 MESF Fluorescence Resolution: < 3% CV for CEN Filters: User Exchangeable Sample Acquisition Rate: 35,000 events/second Volumetric Absolute Count Precision: CV < 5% Sample Flow Rate: 5 – 120 μL/min Sheath Flow Rate: 6.5 mL/min Sample Aspiration Volume: 10 – 100 μL Fluid Container Capacity: 3 L sheath, 3 L waste, 500 mL cleaning, 500 mL decontamination Carryover: < 0.1% Fluidics Maintenance: Automated startup, cleaning, decontamination and shutdown Manual Sample Loading: 12 x 75 mm tube Dimension (WxDxH): 600 x 450 x 390 mm Weight: 39 k

CAE Healthcare METIman Patient Simulator Lab This item was removed from a university lab where it wa (more)s surplus to requirements. It is in good clean condition, due to the power supply not being included we are unable to test it. Operating System Support Minimum Requirements available on request. This item includes a MacBook with the operation manual on it. Unfortunately, it seems like the software was deleted before we received the system. This MacBook requires a plug-in connection to remain powered on, when the cable is removed it no longer powers on. *Examination bed not Included* No power leads supplied with the Item.

Memmert IF75plus Forced Circulation Incubator 74L, 115V Working Temperature Range Min. 10°C above a (more)mbient up to +80°C Convection Type Forced Air Chamber Volume 74 L (2.6 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 74 L (2.6 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF75plus Forced Circulation Incubator 74L, 115V offers precise temperature control with a working temperature range from Min. 10°C above ambient up to +80°C and 0.1°C accuracy, ensuring consistent conditions for sensitive lab processes. Its 74 L (2.61 cu.ft.) stainless steel interior is designed for durability and easy cleaning, while the TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT-color displays provides intuitive control over key parameters such as temperature, fan speed, and air flap position. The forced air circulation system, adjustable in 10% steps, ensures even temperature distribution, making it ideal for various laboratory applications. For enhanced safety, the Memmert IF75plus is equipped with AutoSAFETY features, including an over- and undertemperature monitor, and a mechanical temperature limiter TB for added protection. The Function SetpointWAIT ensures the process only starts when the target temperature is reached, optimizing precision. Additionally, the incubator includes a fixed sterilization program at 160°C for chamber cleaning, as well as an autodiagnostic system for fault analysis. With its robust construction and reliable performance, this incubator is a practical choice for maintaining optimal conditions in the lab. INCLUDED: The Memmert IF75plus Forced Circulation Incubator 74L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. Key features: High precision measurements Stability over Time Calibration and Strict Quality Control Versatility of Applications Cylindrical shape Nominal value: 2 kg

HX7 HR scale&rsquo;s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7&rdquo; colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Temperature range: Ambient +4°C to 50°C Temperature control increment: ±0.1°C Temperature stability  (more)at 37 °C: ±0.1°C Temperature uniformity: ±0.25 °C at 37 °C (in flask media) High temperature disinfection (HTD): 120 °C CO2 range: 0.2 to 20 % CO2 control increment: ±0.1 % CO2 stability at 5 % CO2: ±0.2 % CO2 uniformity: ±0.1 % Speed range: 25 to 400 rpm Available program modes: Constant speed and temperature Display: touchscreen interface Audible and visual alarms: yes Dimensions (WxDxH): 875 x 730 x 850 mm Capacity: 170 L Weight: 152 kg

Labonorm Wall cabinet Gray 1200x1150x350