SI Analytics Xylem Generator Electrode with Diaphragm TZ 1752 + KF 1100

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Adjustable electrode holder arm For electrodes and probes Universal electrode holder arm Great stabi (more)lity thanks to its non-slip circular base of 1.2kg Movement of a radius of 45cm in a 360° plane, this arm receives: 2 electrodes with head Ø 16mm 2 electrodes with head Ø 17mm 1 temperature probe Ø 5mm. Materials plastic and steel Base dimensions Ø 15 x 3cm

This Solartron Schlumberger 1286 Electrothermal Interface was removed from a university lab where ti (more) was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

EG&G Polarographic Analyzer System Model 384B with 303A Dropping Electrode These were removed fr (more)om a university lab where they were surplus to requirements. Both units have been powered up but we were unable to test them further at our facility. Included are; 1x EG&G Polarographic AnalyzerModel 384BThe unit powers on and is in good cosmetic condition. 'BLANK SWV' appeared on the screen after the analyser had powered up. None of the buttons appeared responsive. 1x EG&G Stating Mercury Dropping Electrode (SMDE, DME, HMDE)Model 303AThe unit powers on and is in good cosmetic condition. We were unable to test it. Accessories: 1x EG&G Operating DisketteRevision: F0The unit is in good cosmetic condition. The diskette goes into the back of the polargraphic analyser in the disk drive. 'BLANK SWV' appeared on the screen after the analyser had powered up. 1x EG&G Polargraphic Analyzer user manual 1x EG&G StirrerModel 305The unit powers on via the SMDE and is in good cosmetic condition.The stirrer works in MANUAL mode, and both the slow and fast speeds are working. We could not get the stirrer to work in AUTO mode. 2x Ametek Data DiskModel 394Rev 2.01The units are in good cosmetic condition, they are not compatible with the unit. more likely for a PC, 7x 25ml Glass cupsThe units are in good cosmetic condition 5x 50ml Glass cupsThe units are in good cosmetic condition. 1x Ribbon cables RS232The unit is in good cosmetic condition 1x Cell compartment controller cableThe unit is in good cosmetic condition,it provides power from the 384B Analyser to the 303A SMDE

Eco Chemie BV Metrohm Autolab SPR Biosensor Instrument with Software & Manual This was removed  (more)from a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further. The instrument is supplied with the manual and software. It is in good cosmetic condition with minor marks from use.

Portable pH / ion meter with InLab Expert Go-ISM Seven2Go Pro's simplified menu, LED status light an (more)d uFocus measurement screen provide users with fast, high-quality data. Seven2Go's easy-to-reach buttons and sleek design ensure comfortable one-handed operation. Seven2Go Pro's IP67 design, sunlight-resistant screen and rugged uGo carrying case ensure reliable data, even in difficult and isolated conditions. ISM® Ready: Reduced chance of errors When any InLab ISM® (Intelligent Sensor Management) sensor is connected, the instrument automatically recognizes the sensor and stores the sensor ID, serial number and last calibration data. Specifications - Seven2Go pH / Ion meter S8-Std-Kit Parameter: pH; Ion; ORP Channel: Single channel Version kit: Ready-to-use measuring kit Sensor: InLab Expert Go-ISM PH measuring range: -2 - 20 PH resolution: 0.001; 0.01; 0.1 Accuracy pH (±): 0.002 Ion concentration measurement range: 1.00E-9...9.99E+9 Ion concentration resolution: 3 or 4 digits (automatic interval) Ion concentration accuracy (±): 0.5% Measurement range mV 0 Resolution mV 0.1; 1 Accuracy mV (±): 0.1 Temperature range (2): -30°C...130°C Temperature resolution: 0.1°C Temperature accuracy (±): ± 0.2°C Portable: Yes Safety and Compliance: GLP; Password protection; User Management Compatible with Intelligent sensor management (ISM): Yes Memory capacity: 2,000 measurements Data transfer: PC Degree of protection: Watertight and dustproof (IP67) Languages: English; Italian; French; Polish; Russian; Portuguese; Chinese; Korean; German; Spanish; Thai; Japanese Ease of Use: Multilingual menu; Calibration support; Backlit Memory size: 2000 measurements mV measuring range: -2,000.000...2,000.000

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the stirrers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. The wide range of accessories allows Varioshake shakers to be adapted to any need without problems. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems. The video dedicated to the Lauda Varioshakes with digital control.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Star Lab PCR Workstation AirClean 600 This was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in good working order. It is in good cosmetic condition but has some marks from use. It has no stand.

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

Gilson MyPIPETMAN Select P10mL, 1-10 mL PipetteFeatures - Designed to be ergonomic, safe, and reliab (more)le while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 1 to 10 mL - 3 Year Manufacturer's Warranty