Metrohm Ag/AgCl reference electrode 6.0723.100

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Solartron Mobrey 1286 Electrochemical Interface was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but has not been tested further. It is in reasonably good cosmetic condition but has marks from age and use.

Narishige PE-21 Glass Micro-electrode Puller This item was removed from a university where it was su (more)rplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

EG&G Polarographic Analyzer System Model 384B with 303A Dropping Electrode These were removed fr (more)om a university lab where they were surplus to requirements. Both units have been powered up but we were unable to test them further at our facility. Included are; 1x EG&G Polarographic AnalyzerModel 384BThe unit powers on and is in good cosmetic condition. 'BLANK SWV' appeared on the screen after the analyser had powered up. None of the buttons appeared responsive. 1x EG&G Stating Mercury Dropping Electrode (SMDE, DME, HMDE)Model 303AThe unit powers on and is in good cosmetic condition. We were unable to test it. Accessories: 1x EG&G Operating DisketteRevision: F0The unit is in good cosmetic condition. The diskette goes into the back of the polargraphic analyser in the disk drive. 'BLANK SWV' appeared on the screen after the analyser had powered up. 1x EG&G Polargraphic Analyzer user manual 1x EG&G StirrerModel 305The unit powers on via the SMDE and is in good cosmetic condition.The stirrer works in MANUAL mode, and both the slow and fast speeds are working. We could not get the stirrer to work in AUTO mode. 2x Ametek Data DiskModel 394Rev 2.01The units are in good cosmetic condition, they are not compatible with the unit. more likely for a PC, 7x 25ml Glass cupsThe units are in good cosmetic condition 5x 50ml Glass cupsThe units are in good cosmetic condition. 1x Ribbon cables RS232The unit is in good cosmetic condition 1x Cell compartment controller cableThe unit is in good cosmetic condition,it provides power from the 384B Analyser to the 303A SMDE

LABORATORY INCUBATORS CLN SMART POL-EKO CLN - NATURAL AIR CONVECTION CLN Series incubators maintain  (more)a constant temperature from 5°C above room temperature to a maximum of 100°C. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLN SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLN SMART SERIES The six models of the CLN series cover most of your needs: from mini stoves to the 245 liter internal volume model. For larger volumes, look at the SLW series stoves. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - Door with viewing window - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20 / 60 / 100 mm access door - Additional 30 mm access door - Castors - Table with castors

Canon XF305 HD Video Camera Camcorder With Tripod This item was removed from a university where it w (more)as surplus to requirement. It is in reasonably good cosmetic condition and good working order, we are unable to test it fully at our facility. The unit has been etched with the previous owner's identity. This has been hidden from the photos to protect the client. Batteries, case & tripod included. No charger included.

Scilogex MicroPette Plus 8-Channel Autoclavable Pipettor, 0.5-10μlThe MicroPette Plus pipettes are f (more)ully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus 8-Channel Autoclavable Pipettor, 0.5-10μl includes: - Two Year Manufacturer's Warranty

Labconco FreeZone 4.5L -105C Benchtop Freeze Dryer with stainless steel coil and collector Features  (more)- Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 4.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 4.5 liters of ice before defrosting. Two 1/2 hp HCFC/CFC-free refrigeration systems cool the collector to -105C (-157F) at 60 Hz or -102C (-152F) at 50 Hz, suitable for low eutectic point samples including acetonitrile and dilute methanol and ethanol. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. Models with PTFE-coated collectors that can withstand corrosive compounds are available. Features Upright stainless steel collector coil holds 4Lof ice before defrosting Collector temperature to -105C (-157F) at 60 Hz or -102C (-152F) at 50 Hz for low eutectic point samples including acetonitrile and dilute methanol and ethanol Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. INCLUDED: The Labconco 720401000 FreeZone 4.5L -105C Benchtop Freeze Dryer with stainless steel coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo CORIO CD-B33 Open Bath Heating Circulator, 115V/60Hz (NRTL Certified) Working Temperature Ran (more)ge 20°C to 150°C Heating Capacity 1000W Fluid Type Water, Silicone Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over between internal and external circulation - USB connection - High-quality bath tanks made of stainless steel - Integrated drain screw (except B5 model) The Julabo CORIO™ CD Immersion Heating Circulator Open Bath combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. The CORIO™ CD immersion circulator provides temperatures to 100°C in plastic tanks and to 150°C in stainless steel tanks. Integrated pump enables temperature incubation for internal or external bath applications. A lever below the display enables simple adjustment between internal and external flow. Pump capacity: 15 L/min; 5.1 PSI. The integrated USB port provides external PC communication for control / monitoring and data logging. Stainless steel tanks from 13 to 39L include a drain port. INCLUDED: The Julabo CORIO CD-B33 Open Bath Heating Circulator, 115V/60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris P7700-200 NextPette Variable Volume Pipette, 20 to 200ul Inaccuracy ± 1.2 to 0.6% Imprecisio (more)n ± 1.0 to 0.6% Compatible Tip Size 200ul Features - Market leading accuracy & precision - One handed volume adjustment - Convenient volume lock - Easily visible, 4 digit display - Ergonomic, thumb shaped plunger button The NextPette development project started with feedback from a wide range of researchers and technicians. The Accuris engineering team then set their sites on creating an ultra-lightweight, and ergonomic pipettor without any sacrifice in terms of durability, accuracy and precision. The NextPette incorporates many significant features and advantages truly appreciated by today's research laboratories.The easily accessible volume adjustment system reduces the time and inconvenience associated with volume selection. The uniquely positioned volume dial is located above the pipette handle, allowing for easy one handed adjustment with the user's thumb. The volume display is located on the side of the pipettor that faces the user. Unlike traditional pipettors, the NextPette does not require a second hand to rotate the pipettor 180° to observe the display.The NextPette also features an innovative, asymmetrical designed plunger button that can be rotated to match the comfort preference of the user. This button is freely adjustable to rotate continuously between wide setting, resulting in the more traditional feel of a round, larger diameter plunger button, or to a more narrow (thumb shaped) contour preferred by the majority of researchers.The NextPette's materials and components were carefully selected to minimize weight and ensure durability and a long service life. Internal components include precision plungers made of stainless steel (1ul, 10ul, 5000, and 10,000µl models) or ceramic (20ul, 200ul, and 1000ul models) and all use durable PTFE seals. The pipettors have also been designed with service in mind. They are easy to disassemble, and seals are easy to replace. Silicone lubricant is included with each pipettor. Recalibration can be done in the lab - no tools are required and the instruction manual includes full details on how to properly check pipetting accuracy and how to recalibrate if necessary. The entire pipettor is autoclavable at 121°C and resistant to UV exposure. All pipettes are factory calibrated in accordance with ISO 8655 standards and include a factory calibration certificate. INCLUDED: The Accuris P7700-200 NextPette Variable Volume Pipette, 20 to 200ul includes: - Calibration Certificate - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty