Facilities & equipment

Chemically resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory application (more)s. Especially suited for handling aggressive vapors, it features Aluminum alloy, PTFE-coated diaphragms and FFPM valves. 100% oil-free transfer – thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Aluminum alloy pump head combined with PTFE-coated diaphragm Environmentally friendly High level of gas tightness Flow rate: 10 l/min.(at atm. pressure) Operating pressure: 1 bar Ultimate vacuum: 8,0 mbar Pump head: Aluminum alloy Diaphragm: PTFE-coated Valves: FFPM Dimensions (LxHxW): 281 x 187 x 140 mm Weight: 6.9 kg

Agilent 1100 system consisting of: 1x Agilent 1100 Degasser type G1379A 2x Agilent 1100 Isocratic Pu (more)mp type G1310A 1x Agilent 1100 Variable Wavelength Detector type G1314A 1x Agilent 1100 Fluorescence Detector type G1321A 2x Solvent tray Manual injector with 1 ml sample loop Laptop Agilent 1100 IsoPump: Hydraulic system: Dual piston in series pump with proprietary servo-controlled variable stroke drive, floating pistons and active inlet valve Setable flow range: 0.001 – 10 ml/min, in 0.001 ml/min increments Flow range: 0.2 – 10.0 ml/min Flow precision: < 0.3 % RSD (typically 0.15 %), based on retention time, at 1 ml/min Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 ml/min, Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 ml/min Pressure pulsation: < 2 %amplitude (typically < 1 %), at 1 ml/min isopropanol, at all pressures > 10 bar (147 psi) Compressibility compensation: User-selectable, based on mobile phase compressibility Recommended pH range: 1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 VWD: Detection type: Double-beam photometer Light source: Deuterium lamp Wavelength range: 190–600 nm Short term noise (ASTM): ± 0.75 x 10-5 AU at 254 nm Drift: 3 x 10-4 AU/hr at 254 nm Linearity: > 2 AU (5%) upper limit Wavelength accuracy: ± 1 nm Self-calibration with deuterium lines, verification with holmium oxide filter Band width: 6.5 nm typical Flow cell: 14-µl volume, 10-mm cell path length and 40 bar (588 psi) pressure maximum Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 FLD: Detection type: Multi-signal fluorescence detector with rapid on-line scanning capabilities and spectral data analysis Light source: Xenon flash lamp Pulse frequency: 296 Hz for single signal mode, 74 Hz for spectral mode Excitation monochromator: range; 200 – 700 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 300 nm Emission monochromator: range; 280 – 900 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 400 nm Spectrum acquisition: Excitaiotn or emmision spectra, scan  speed; 28 ms per data point, step size; 1 – 20 nm Wavelength characterisric: Repeatability; ±0.2 nm, accuracy; ±3 nm Flow cell: 8 µl volume and 20 bar pressure, quartz Dimensions (HxWxD): 135 x 345 x 435 mm Weight: 11.5 kg

The Invitrogen Tali Image-Based Cytometer is a 3-channel (bright field, green fluorescence, red fluo (more)rescence) imaging platform that performs suspension cell–based assays right from the benchtop. With the Tali cytometer, three-parameter population analysis can be completed in approximately 1 minute per sample using 25 μL sample volumes. In addition to the bright field channel, the Tali Image-Based Cytometer features two fluorescent channels (green and red), enabling it to simultaneously count green or red fluorescent stains, as well as cells expressing GFP and RFP. The Tali also offers an intuitive user interface, provides the option to save data and generate a report, which can then be transferred to a PC using the USB drive. Other features include presenting comprehensive data with graphic reports and allowing the export of data as .csv (comma separated value), .jpg, .fcs, and .pdf files for archiving and sample comparisons. Processing time: 10 seconds to 2 minutes, depending on the number of fields captured Sample concentration range: 1 x 105 – 1 x 107 cells/mL Particle/cell diameter range: 5 – 60 µm Required sample volume: 25 µL Optics: 3 channels (bright field, green fluorescence, red fluorescence) Excitation: Green channel LED (458 ± 20 nm), Red channel LED (530 ± 20 nm) Green channel filter: 466/40 EX, 495 LP Di, 525/50 EM Red channel filter: 543/22 EX, 580 LP Di, 585 LP EM Camera: 1.3 Mega pixels, 4x objective, 4x or 16x digital zoom Dimensions (WxDxH): 290 x 450 x 290 mm Weight: 9 kg

Head: Trinocular Eyepiece: Olympus WHK 10x/20 L Objectives: DPlan 10x/0.25, APlan 40x/0.65, SPlan Oi (more)l 100x/1.25, DPlanApo UV Oil 20x/0.80, DApo UV Oil 40x/1.30, DApo UV Oil 100x/1.30 Final Magnifications: 100x, 400x, 1000x Nosepiece: Six-way Focusing: Coaxial coarse and fine control knobs Illuminator: Fluorescence and Halogen

The uScopeMXII digital microscope produces high-quality images while allowing you to scan a region o (more)f interest. This digital workhorse offers unprecedented capability in a form factor ideal for desktop PC users. A little larger than an external hard drive, the uScopeMXII delivers high-resolution digital images from standard glass slides. Illumination: LED (White) Camera Resolution: 960×540 Field Image Format: JPEG, PNG (lossless) Scanned Image Capture: Single Field, Tiled Fields, Overlapped Fields, Underlapped Fields Viewing Formats: Single Field, Tiled Fields, Deep Zoom Image Export Formats: JPG, BMP, PNG, TIFF

AKTA Purifier FPLC System

The RV 10 digital represents the continual enhancement of the IKA RV 10 rotary evaporator line. The  (more)unit comes with an universal heating bath, vertical glassware, state-of-the-art safety features and digital connectivity. The RV 10 digital is a robust and reliable lab companion. Its optimized bath volume allows for fast heat-up times. The condenser unit has special designed glass tubes that utilize the 1600 cm² surface extremely efficient. That’s why the RV 10 digital delivers reliable and reproducible process results that are usually reserved for more costly systems. Additional features such as smooth start, left-right interval or timer function capability support the user in their daily lab work. Another important aspect of the RV 10 digital are the sophisticated safety features. The motorized lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. Safety temperature circuits can be set individually. Dry-run protection, adjustable lower end stop and lock function of bath setting complete the line of safety features. Type of cooling: vertical Cooling surface: 1600 cm² Speed range: 5 – 280 rpm Reversible direction of rotation: yes Lift: Motor Stroke: 140 mm Heating temperature range: room temp – 180°C Set temperature resolution: ±1 K Filling volume max: 4 l Timer: yes Dimensions (WxHxD): 500 x 430 x 440 mm Weight: 32.36 kg

The Buchi R-205 rotavapor is designed for applications associated with solvent evaporation. This rot (more)avapor is extremely suitable for, among other things, the distillation of solvents, for the evaporation of solvents and suspensions and for the (re)crystallization of liquids in the rotating evaporation flask. The distillations can be carried out under vacuum and atmospheric pressure. This increases performance and helps protect products. Speed: 0-250 rpm External dimensions (WxDxH): 450 x 360 x 1000 mm Pressure: 0 – 1400 mbar Temperature range: 20ºC to 180ºC

The radiomatic model 515 is a high performance flow scintillation analyzer for the qualatative and q (more)uantatative monitoring of single and dua labeled radioisotopic samples. It presents a unique combination of state-of-the-art scintillation counting technology and interchangeable beta/gamma/positron emmission detectors.

Dimensions (H x W x D): 1730 x 1020 x 780 mm Internal dimensions (H x W x D): 600 x 995 x 600 mm Dia (more)meter of exhaust duct: 250 mm

Pure water requires a storage system to prevent the degradation of your water quality. Merck Millipo (more)re’s 30 liter polyethylene (PE) storage tank is designed to maintain consistent purity of stored water and provide effective protection against airborne contaminants.

Type of movement: orbital Shaking stroke: 10 mm Permissible shaking weight (incl. attachment): 7.5 k (more)g Permissible ON time: 100 % Speed range: 0 – 500 rpm Speed display: LED line Timer: yes Time setting range: 5 – 50 min Operating mode: timer and continuous operation Dimensions (WxHxD): 360 x 98 x 420 mm Weight: 8.5 kg

Dimensions: 900 x 600 x 800 mm

A Sartorius balance, type GE811 with a weighing range of 810 g and a readability of 0.1 g. dim. (wei (more)ghing platform): 145 x 175 mm.

Safe, reliable and economic laminar flow cabinet for protection of the work item, including ergonomi (more)c practical properties needed in normal work. Particle free working conditions in class ISO5. All materials and surfaces are smooth and resistant to cleaning and disinfection agents. Front screen and side panels are made of shock-resistant laminated safety glass. Electrically operated front screen. Glare-free and shadow-free fluorescent lighting providing illumination on work surface 1500 lux Flow control with digital display Alarm for false flow speed 1/2 speed switch Hour counter UV outlet with switch (lamp not included) Base stand 800 mm Down flow 0,4 m/s ± 20% Dimensions (WxDxH): 1930 x 790 x 1460 mm Internal dimensions (WxDxH): 1840 x 600 x 655 mm

All the outstanding features of the Reax Top’s “little brother” can be found in this model: a rotati (more)onal speed of up to 2,500 rpm and a 5 mm shaking orbit. The electronic speed control and the scaling of the speed display allow precise settings. Applications that require a determined speed are thus shaken more gently. Shear force-sensitive organisms remain particularly protected by the constant speed in the low range. Motion: vibrating Rotation speed range: 0 – 2,500 rpm Operating Mode: automatic or continous Orbit/Stroke: 5 mm

Capacity: 410 g Readability: 1 mg Repeatability: 0.9 mg Linearity: ±2 mg Calibration type: Internal  (more)Dimensions (WxDxH): 194 x 366 x 276 mm Usable heigh of draft shield: 175 mm Weighing platform: 127 x 127 mm Weight: 7.6 kg

110V

Flow rate: Up to 32 l/min Application: Analytical Laboratory LC-MS, Analytical Laboratory LC-MS/MS,  (more)Nebulizers for APCI and ESI, ELSD, Turbo Vaps, Chemical Solvent Evaporation Type of gas prepared: Nitrogen Gas purity: up to 99.5% Inlet pressure classification: 8 barg Intake air quality specifications: ISO8573-1:2001 Class 3.2.1 Dimensions (HxWxD): 700 x 310 x 900 mm Weight: 93 kg Includes 270 L storage tank

Excluding rotor.

Dimensions (HxWxD): 760 x 1525 x 790 mm

Speed control range: 0 – 3000 RPM Max. stirring volume (water): 5 litres Max. length of magnetic sti (more)rring element (bar): 50 mm Stirring liquid viscosity: up to 1170 mPa.s Maximum continuous operation time: 24 hrs Operation in closed laboratory rooms: at ambient temperature from +4°C to +40°C Working plate size: 110 x 110 mm Working surface material: Stainless steel Overall dimensions (WxDxH): 120 x 150 x 65 mm Weight: 0.8 kg

Dimensions (HxWxD): 1980 x 600 x 620 mm

Strong magnetic field Infinitely variable speed from 0 – 1100 rpm Stainless steel housing facilitate (more)s cleaning and sterilization Dimensions (WxHxD): 140 x 75 x 200 mm Plate (LxW): 140 x 120 mm