ETP Active Film Electron Multiplier Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Revco Scientific LIC-2090W14 Ultra Low Temperature Chest Freezer ULT This item was removed from a un (more)iversity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). The item's exterior shows wear and tear, with scratches, scuffs, and minor dents, while the interior has light rust. The door seals are deteriorated, and the top lid fails to stay open due to damaged hinges and weakened lid supports, but overall it is still in working order. Included with the freezer are five rack units: 1 x 2 compartment rack 29 x 29 x 56cm 3 x 16 compartment rack 25 x 14 x 56cm 1 x 16 compartment rack 28 x 14 x 56cm

Life Technologies Ion Torrent Ion Proton Semiconductor Sequencer This item was removed from a univer (more)sity lab where it was surplus to requirements. It powers on, we are unable to conduct further testing at our facility. The item is in good cosmetic condition and includes the following: This system includes the following:- Keyboard - 184 x new Reagent tubes - 80 x Reagent tube caps - Bag of Molecular probes - 14 x packs of ion proton reagent tube sippers - 4 x packs of ion proton wash bottle sippers - 2 x packs of ion PGM Reagent bottle sipper tubes - 2 x packs of chip adapters - 2 x box wash 2 bottles - 1 x box template OT2 supplies 200 v2 kit - 1 x box template OT2 supplies 200 v2 - 1 x box Hi-Q sequencing 200 solutions - 1 x chip kit v2- 4 pack Specifications:- Model: Ion Proton Sequencer - S/N: 247770005

Sanyo MDF-U74V Ultra Low Temperature Freezer This was removed from a university lab where it was sur (more)plus to requirements. It is in good working condition and has been tested with a digital thermometer (not included) to -86˚C. It is in good cosmetic condition with minor marks from use.

This Philips XL20 SEM Electron Microscope was removed from a university lab where it was surplus to  (more)requirements. The unit is in good cosmetic condition. Due to various components not being included, we are unable to test this item, and therefore it's sold as Spares or Repairs.

A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg Capac (more)ity 42 g / 210 g Readability 0.01 mg / 0.1 mg Repeatability 0.02 mg / 0.1 mg Features - Precision semi-micro balance with dual-range readability of 0.01 mg / 0.1 mg for high-accuracy applications requiring consistent, reliable results across a wide dual capacity range - Splash/Dust Proof Membrane Keypad - Easy to clean antistatic breeze break, ABS housing, and SS pan, spill ring, dust plate & base floor - Stable die cast aluminum base with built-in internal weight that performs automatic self-calibration - Easy to see large .7in (17.8mm) LCD display with simple 6 button keypad interface - Super visible front mounted spirit level bubble helps reduce leveling time and increase accuracy - One touch Full Digital Calibration (internal & external) ensures balance is calibrated onsite for the best performance - Space saving footprint and collapsible doors maximize valuable bench space and reduce breeze break mishaps - Handy step card and door control lever opens either side of the weighing chamber for quick and efficient access - Easy-click door lock joints enable user to quickly configure doors to fit weighing work flows The A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg, is crafted for precision and ease of use, equipped with advanced features tailored to meet the demands of diverse laboratory environments. With dual capacities of 42 g and 210 g, and an impressive readability of 0.01 mg in the lower range and 0.1 mg in the higher, it ensures exceptional precision for critical measurements. Its splash and dust-proof membrane keypad, along with a robust die-cast aluminum base, provides durability and stability. The built-in internal calibration weight enables automatic self-calibration, ensuring consistent accuracy. A large 0.7-inch LCD display and straightforward six-button keypad interface make the balance easy to read and operate, while the front-mounted spirit level bubble helps users quickly achieve accurate leveling. With an anti-static breeze break and ABS housing, along with stainless steel components such as the pan, spill ring, and base floor, the Gemini GR-202 is designed for easy maintenance and long-lasting performance. The compact footprint and collapsible doors save valuable bench space and reduce accidental mishaps, while easy-click door lock joints allow users to adjust the chamber for convenient access and workflow efficiency. The Full Digital Calibration function supports both internal and external calibration, allowing quick, reliable calibration on site for peak performance. For data management, this model includes a memory function to store up to 200 weighing data records and complies with GLP/GMP/GCP/ISO output standards. Connectivity options include bi-directional RS-232C, and with the underhook for below-weighing applications, the Gemini GR-202 adapts to various tasks with precision. Supported by a 5-year warranty, this balance ensures reliable performance for your lab’s most critical measurements. INCLUDED: The A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg includes: - Weighing Pan - Fine Range Breeze Break Ring - Dust Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

PROFESSIONAL SCALE, SUITABLE FOR DIFFERENT USES Striking the ideal balance of inventive features and (more) simple, functional weighing capabilities, the OHAUS Adventurer Series has all the applications you need for routine weighing and measurement tasks. Featuring a color touchscreen, GLP/GMP compliance features, two USB ports, and more, the Adventurer is the most comprehensive scale in its class. - Color touchscreen, with icons and intuitive guidance - Useful for a wide variety of applications - Structure and construction among the best Ohaus: resistant, large weighing surfaces, space-saving design of the draft shield and protective hood allow use in laboratory, educational and industrial environments. Other standard features and equipment RS232 interface, integrated weigh below hook, protective cover for the entire base structure, removable stainless steel pan, die-cast metal base, safety bracket, front and illuminated level bubble, four feet adjustable, software lockout menu, stability indicator, overload/underload indicators in software, user selectable environmental settings, audible indicator, user selectable brightness level settings, auto dimming, touchscreen calibration, auto tare, operating language user selectable (nine). MODELLI DISPONIBILI LABORATORY INSTRUMENT Dual USB ports. Front USB easily accessible and simplifies data downlaod. On the back of the scale there is a second USB port to be able to connect it to the PC. It will also be possible to upload user settings to USB, saving different profiles and transporting them to other Adventurer scales. Real time clock with GLP/GMP data. This feature keeps accurate time even in the event of a power failure, and the GLP data function has the ability to log sample name, project names, and balance IDs to help meet traceability and compliance requirements. The draft shield doors consist of two glass panels that will take up very little space on your counter. The large side entrance will allow for unobstructed access and easy cleaning, ensuring a safe working environment while minimizing contamination. Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Dynamic/Animal Weighing, Totalization/Statistics, Formulation, Density Determination, Display Hold Display 4.3' (109 mm) touchscreen display with color VGA graphics resolution and user controlled brightness Operation AC adapter (included) Communication RS232, USB host, USB device (included). Real time clock with GLP/GMP data output. Framework Metal base, ABS top housing, stainless steel pan, glass draft shield with two-piece top-mounted side doors and sliding top door (1 mg models only), illuminated front level bubble, hook for weighing below, safety bar Construction features Selectable environmental filters, auto tare, user selectable pot life calibration points, software lockout and reset menu, user selectable communication settings and print options, user configurable project and user IDs, up to 9 operating languages

*Description reads: Reasonable cosmetic condition - appears to be in very good condition other than  (more)one tape mark* Panasonic Model MDF-U443-PE Biomedical Freezer Lab This item was removed from a university where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Features: 5 x Shelves: 53 x 61 cm

Arctiko Integraline ULUF P10MV -86C Ultra Low Benchtop Freezer Temperature Setting -25°C / -86°C Vol (more)ume 7L Cooling Technology Single System / Static Inverter / MV Features - Compact space-saving design makes the under-counter ULTs the perfect storage solution for laboratories with limited space - Single Compressor Technology with a simple structure ensures easy maintenance, lower heat dissipation, low energy consumption and noise reduction - Direct cooling for optimised temperature stability and uniformity, even with multiple door openings - Heated door frame prevents ice from building up around the gasket securing a stable and uniform temperature inside the freezer - Low energy consumption is made possible with ECO mode and ultra-efficient vacuum-insulated panels - Built-in CO2 backup controller system for extra security for your valuable samples - Self-diagnostic function to guarantee that your alarm system is always working correctly - The unit includes a vacuum release port for easy access and a key lock for added security. - Equipped with four leveling feet and optional castors for flexible positioning and stability. Equipped with ARCTIKO's true single compressor technology, this freezer series offers superior temperature uniformity and outstanding cooling performance This ultra-low temperature freezer stands out with its universal voltage capability, ensuring adaptability across global power supplies and making it ideal for diverse laboratory settings. Features a built-in CO2 backup system, self-diagnostic function for reliable alarm operations, and low energy consumption with an ECO mode. The compact freezer enables easy access to samples and provides user-flexible opportunities at the workplace. This range of compact freezers is ideal for placing under or on your table/counter, or near your working stations. With ARCTIKO’s true and original single compressor technology, you are guaranteed superior temperature uniformity and outstanding cooling performance, which gives you time to focus on your research. All in all, this freezer is an extremely reliable solution for laboratory research when your lab or clinical space is too small for a full-size ULT freezer. The primary cable of this device isinterchangeable, allowing it to be usedglobally. Switch between Schuko, NEMA,and UK plugs with ease. Additionally, there’sno need for a transformer; this product iscompatible with any voltage from 110V to240V. The ULUF P10MV automatically adjusts its operationbased on the voltage input. INCLUDED: The Arctiko Integraline ULUF P10MV -86C Ultra Low Benchtop Freezer includes: - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

If you buy a WLY series balance by July 31, 2024, you will receive each of these products along with (more) a FREE lifetime license for the Workflow Module. Precision Balance WLY Fast and accurate weight determination thanks to the duo: the WLY multifunction balance and the PUE7 weighing terminal. Ease of operation and maximum automation of the weighing process. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations and differential weighing. The power of WLY’s working mods. Use the potential Barcode scanners, receipt printers, label printers, RFID readers, PC equipment or an additional weighing platform – thanks to multipurpose software, WLY balance can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. DIY with WLY With WLY you will Do It Yourself: You will program on-screen keys and functional keys You will program infrared proximity sensors You will design printouts You will design text data that is displayed in an indicator display. This balance is the result of a combination of our experience and true precision. Want to generate labels? You can. With Label Editor software, you will generate: Standard labels for single products C labels for cumulative containers CC labels for containers with cumulative containers. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The high resolution MPS module operates on the basis of electromagnetic force converter. The device  (more)may be easily integrated into existing system owned by the customer. Compact design and integrated electronics provide various possibilities of MAS module adaptation into technological lines and installation inside laboratory equipment or devices. Measurements can be carried out using either weighing pan or under-pan weighing system, i.e. solution enabling the load to be suspended beneath the module. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The module has been equipped with RS232 and USB type B interfaces. Dedicated freeware, the R Panel, has been designed to enable control of the module via a computer. It provides access to all the keys and functions available directly from the operation panel, e.g. taring, zeroing, setup, etc. Innovative algorithm for automatic search of electromagnetic weighing modules facilitates connection to a computer. R Panel software makes complete functionality of the R series balances available via the PC. R Panel functionality has been implemented in RLab program as one of its numerous functions.

RCT basic ready-to-go Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Sett (more)ing accuracy speed 10 rpm Features - Stand for precise sensor positioning - LED displays for clear temperature and speed monitoring - Adjustable settings for tailored control - Robust construction with aluminum alloy setup plate - Integrated safety circuit for temperature control - Compatible with external temperature sensors - Versatile connectivity options with RS 232 and USB interfaces Precise temperature control with the RCT basic ready-to-go Solution. This comprehensive package includes essential components such as a stand for secure positioning, multifunctional silicone cover, and PT 1000 temperature sensor. Achieve accuracy and efficiency effortlessly with LED displays and adjustable settings.INCLUDED: The RCT basic ready-to-go Solution includes: - H 16 V Support rod - BC 1000 Beaker cap - Screw driver - RCT basic - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - H 44 Boss head clamp - Manufacturer's Documentation - 2 Year Manufacturer's Warranty