Kulite Semiconductor Pressure Transducer XTM-190M-140BAR SG

Philips XL30SEM Environmental Scanning Electron Microscope ESEM This is being sold on behalf of a c (more)lient The system was in working order about 5 years ago, but has since required a new PC and has not been used. It is in good cosmetic condition with minor marks from use. It is currently situated in Durham UK, and is available for collection, but we can likely arrange shipping if needed.

Renishaw Structural & Chemical Analyzer Model SCA SEM Raman Spectrometer This was removed from a (more) university lab where it was surplus to requirements. The unit powers up and is almost brand new. It has only run for 134 hours. It is in excellent cosmetic condition with minor marks.

LEICA EM-PACT 1 High Pressure Freezer w/ EM-AFS Low Temperature Embedding System This was removed fr (more)om a university lab where it was surplus to requirements. The system powers up but we were unable to test it properly without access to liquid nitrogen. The lab did confirm it was in working order when last used. It is in good cosmetic condition with minor marks. Included are; LEICA EM-PACT 1 High Pressure FreezerType: 706802Serial#: 519799 LEICA EM-AFS Low Temperature Embedding SystemType: 702701Serial#: 518928 LEICA EM-UVType: 702727Serial#: 519711 JDC- 10 10 litre Dewar vesselSerial#: 00958 Also included is the following: 2 x Application of the Leica EM PACT2 and EM RTS Disc LEICA EM AFS Operating Manual LEICA EM PACT Operating Manual LEICA EM PACT Application Brochure 5 x Service kit with various replacement parts

Revco Scientific LIC-2090W14 Ultra Low Temperature Chest Freezer ULT This item was removed from a un (more)iversity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). The item's exterior shows wear and tear, with scratches, scuffs, and minor dents, while the interior has light rust. The door seals are deteriorated, and the top lid fails to stay open due to damaged hinges and weakened lid supports, but overall it is still in working order. Included with the freezer are five rack units: 1 x 2 compartment rack 29 x 29 x 56cm 3 x 16 compartment rack 25 x 14 x 56cm 1 x 16 compartment rack 28 x 14 x 56cm

PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and the heating is in good working order. Inside tank dimensions - L59 W31 H37cm It is in good cosmetic condition with some marks from use.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the shakers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

KNF N816.1.2 KT.18 vacuum pump. Diaphragm pump and compressor for slightly corrosive vapors and gase (more)s. Without oil. Flow rate L/min 30. Max. allowable operating pressure 0.5 [bar g]. Maximum vacuum 160 mbar abs. Ambient and medium temperature +5 °C to +40 °C. It features PPS heads, PTFE-coated diaphragms and FFPM valves. Dimensions 361*141*102 mm. Weight 3.95 kg. User manual. The KNF N816.1.2 KT.18 vacuum pump is a highly efficient and reliable equipment used to generate vacuum in different industrial and laboratory applications. This vacuum pump features a compact and robust design, making it ideal for use in tight spaces. It is equipped with a powerful and silent motor that guarantees optimal performance and uninterrupted operation. In addition, it has a temperature control system that prevents overheating and prolongs the useful life of the equipment. This vacuum pump offers high air flow and excellent suction capacity, making it an ideal choice for applications requiring fast and efficient vacuum. In addition, it has an integrated air filtration system that guarantees the purity of the vacuum generated. In summary, the KNF N816.1.2 KT.18 vacuum pump is a reliable and efficient option for generating vacuum in industrial and laboratory applications. Its compact design, optimal performance and ease of use make it an indispensable tool for those who require a quality vacuum in their processes.

Thermomixer comfort allows simultaneous mixing and temperature control. Potential applications inclu (more)de: enzyme reactions, transformations, denaturations of DNA, RNA and proteins, culture of bacteria and yeasts, bead technology, isolation of plasmids and DNA fragments from agarose gels, immunoprecipitation and hybridization. Two selectable program sequences with incubation, mixing and rest phases with subsequent cooling to 13°C below the ambient temperature and automatic recognition of the thermoblock and display of maximum revolutions. Equipped with a 8x 15 mL block Active Peltier heating element and counter cooling provide wide temperature control Short mix, Intermittent mix and Pause function Timer function: 1 min to 99.59 hours or continuous use Mixing speed range: 300 – 1500 rpm Amplitude: 3mm Incubation accuracy: ± 0.5 (between 20°C and 45°C), ± 2°C (below 20°C and above 45°C) Temperature control range: 13°C below ambient temperature to 99°C Temperature setting: 1°C – 99°C Heating rate: ~5°C/min Cooling rate: 2 – 3°C/min (between 99°C and ambient), 0.5 – 1°C/min (between ambient and 13°C below ambient) Dimensions (WxDxH): 220 x 250 x 125 mm Weight: 3.2kg