Adventurer AX2201 Ohaus

Ohaus MB25 Moisture Analyzer Superior performance, numerous configurations and optimal results The M (more)B25 analyzer provides an accurate determination of moisture content at an unbeatable value. Featuring a large backlit LCD display, standard RS232 port, 110g range with 0.005g / 0.05% resolution, and halogen heating, the MB25 provides moisture determination for any budget. Applications Determination of the percentage humidity, determination of the percentage solid component, weighted. Display Backlit liquid crystal display (LCD). Operation Power cord (included). Communication RS232 (included). Structure Halogen heating, ABS armor, metal plate holder, metal plate manipulator, protective hood. Construction features Three shutdown criteria (manual, timed, automatic), 1 standard heat profile, heating range from 50°C to 160°C (in 5°C increments). Construction features Plate size 90 mm. Heater type Halogen lamp. Automatic shutdown criteria - Pre-defined weight / time loss; Timed; Manual.

Ohaus MB120 Moisture Analyzer MB120 allows you to run more samples, access saved data and spend less (more) time preparing and more time working with results. Smart, futuristic features that allow you to work at full potential: - Get started with SmartGuide ™ right away. This revolutionary feature automatically analyzes a sample and creates a method, thus eliminating any uncertainty from the initial setup. - The MB120 is able to produce fast and accurate results thanks to features such as a halogen heating system, customizable shutdown criteria and four integrated drying profiles. - The MB120 allows you to store up to 100 methods and 1,000 measurement results. Stored results can be exported and methods can be shared across multiple devices. Applications Determination of percentage humidity, determination of the recovery of percentage humidity, determination of solids in percentage, weighing Display 4.3 inch TFT color touchscreen display Operation Power cord (included) Communication RS232 with GLP / GMP data output, USB host and USB device (included) Structure Metal base, ABS top housing, halogen heat source, stainless steel plate holder, stainless steel plate manipulator, protective hood Construction features Seven shutdown criteria (manual, timed, custom automatic% / s, custom automatic mg / s, A30, A60 and A90), four drying profiles (standard, fast, ramp and step), storage up to 100 methods and 1,000 results for all methods, user guide, heating temperature range from 40 to 230 ° C (in 1°C increments), 14 languages ​​of operation Technical features Resolution for moisture content: 1mg/0.01%. Heater type: halogen lamp. Heat profiles: Standard; Fast; Ramp; Step. Recommended humidity range: 0% - 100%. Sample size: 0.5g – 1290g. Shutdown criteria: Manual; Timed; Automatic - Preset weight / time loss; Custom - User configurable weight / time loss; Custom: User configurable% moisture / time loss. Test library: 2. Additional features - MB90 Upper housing in ABS, weighing pan support in stainless steel, pan holder in stainless steel, protective hood, 3 shutdown criteria (manual, timed or automatic), 2 heating profiles (standard and fast), storage of up to 2 methods and 100 test results for each method, user guide, heating temperature range 40–200°C (in 1°C increments), 13 operating languages ​​(display only, no typing). Drying profiles Two pre-set profiles for drying in one step: just set the temperature and the timer. FAST: reaching the temperature in the shortest possible time. STANDARD: reduces overheating to a minimum while still reaching the temperature quickly. The simplest control panel • Icon driven menu navigation; no training is required. • 4 mechanical keys for fast one-step operation: Tare, Start/Stop, Print, On/Off. • Simplified moisture analysis; in just 3 steps, routine testing on samples: 1. Tare the empty sample dish. 2. Add sample according to best practices. 3. Press start and see your results! Halogen heating dries samples in seconds and is 40% faster than traditional infrared methods. Large, bright touchscreen display and quick and easy menu navigation for precise moisture analysis. Versatile connectivity options to handle data collection and transfer needs: improve user experience. • USB and RS232 ports - quick connections to a PC or flash drive. • Data collection and transfer directly to a USB stick.

AFFORDABLE PRICE AND EXCELLENT RESULTS The Pioneer PX combines basic weighing functionality with com (more)petitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education environments. The PX is affordably priced and intuitively designed for intelligent operation, with a 2-line display to provide additional information and USB and RS232 interfaces for easy communication connection. - Excellent value for money - Built to last, Pioneer is designed with a metal base frame, stainless steel underplate and weighing pan - Features of the top class as standard: second line in the display for additional information or usage tips; static removal bar for proper grounding; USB connectivity. Other Standard Features and Equipment Metal base, plastic top housing, removable stainless steel weighing pan, removable glass draft shield or side doors, real-time clock with GLP/GMP data, integrated weigh below hook, safety bracket, safety lockout for adjustment and protective hood, user selectable environmental filters and brightness settings, auto tare, auto dim, user selectable span calibration points, software lockout and reset menu, communication settings and options user selectable data printout, user definable project and user ID, software overload/underload indicator, stability indicator, operation in 11 languages. MODELS AVAILABLE InCal= internal calibration. ExCal= external calibration *CE approved models STANDARD FUNCTIONS FOR PROFESSIONAL USE - Real-Time Clock (RTC) function maintains accurate time even in the event of a power outage. The GLP/GMP data output function allows sample name, project, user and balance IDs to be recorded, helping to meet traceability and compliance requirements. Password protection reduces the risk of accidental or unauthorized changes. - Equipped with USB and RS232 connectivity ports, the Pioneer PX scale allows for easy communication with a PC, impact printer or Zebra label printer. - Eco-friendly features: Auto shut-off and other brightness settings save energy when the scale is not in use.

Datalogic PowerScan PD9531 is a quick and reliable scanner intended for area imager barcodes. The sc (more)anner ensures omnidirectional readout of barcodes, even from the distance of 1 m. Datalogic Scanning offers two versions of scanning modules: standard - dedicated for standard-resolution barcodes, and HP - more versatile scanner of wide reading angle dedicated for high resolution barcodes. A characteristic feature of the scanner is high resolution of the image sensor that meets expectations of most applications dedicated for warehouse, logistics, transport and production solutions. Patented technology, the Green Spot and Datalogic 3GL™ (3 Green Lights), informs the user about correct barcode readout. This solution is ideal for rooms with high background noise such as industrial areas. The scanner is equipped with housing that features IP65 ingress protection which makes it both waterproof and dustproof device. Designed to withstand multiple drops from a height of 2 m to solid surface. User comfort is guaranteed by ergonomic shape, i.e. handy and well-balanced design. These make Datalogic PD9531 a perfect device to be applied in industry, logistics and warehouse.

XA100 pipette calibration adapter enables calibration and/or verification of piston pipettes by mean (more)s of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 100 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

XA100 pipette calibration adapter enables calibration and/or verification of piston pipettes by mean (more)s of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 100 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply Transfer Area Up to 14 x 16 cm Maximu (more)m Power Settings 30 V, 500 mA, 15 W Maximum Gel Capacity 4 Mini Gels Features - Intelligent built-in power supply—prevents the stack from overheating by monitoring the transfer status - Requires minimal current—does not generate excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent build up of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE70XP Semi-Dry Transfer Unit with Built-In Power Supply is an innovative system designed for the rapid and efficient transfer of proteins from polyacrylamide gels onto nitrocellulose or PVDF membranes. Featuring an intelligent built-in power supply, the TE70XP monitors transfer status in real-time, automatically halting the process to prevent overheating of the stack. With a 14 x 16 cm transfer area, the TE70XP accommodates up to four mini gels in a stacked format, allowing for high-throughput transfers without compromising quality. This semi-dry transfer unit is equipped with durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent results. Vented electrodes prevent bubble buildup, enhancing the reliability of each transfer. Designed to minimize buffer requirements, the TE70XP reduces reagent costs and preparation time, making it a cost-effective solution for busy labs. Its robust construction includes a molded base with a platinum-coated titanium anode and a hinged lid with a stainless steel cathode, ensuring long-lasting performance. INCLUDED: The Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply includes: - Molded Base with Platinum-Coated Titanium Anode and Internal Power Supply - Hinged Lid with Stainless Steel Cathode - Blotting Paper (14 x 16 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (16.5 x 18.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

F1 Mass Standard - rectangular weights. Nominal value - 20 kg.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

E2 class standards are synonymous with excellence in mass measurement. Their versatility and high pr (more)ecision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results. Product Features Highest class of accuracy Indispensable in metrology laboratories where the highest measurement precision is required. Cylindrical shape The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden packaging The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set includes 9 mass standards, 1 tweezer.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Speed control range: 0 – 3000 RPM Max. stirring volume (water): 5 litres Max. length of magnetic sti (more)rring element (bar): 50 mm Stirring liquid viscosity: up to 1170 mPa.s Maximum continuous operation time: 24 hrs Operation in closed laboratory rooms: at ambient temperature from +4°C to +40°C Working plate size: 110 x 110 mm Working surface material: Stainless steel Overall dimensions (WxDxH): 120 x 150 x 65 mm Weight: 0.8 kg