Oxford Instruments 1 Amp Magnet Power Supply Unit Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W Dimensions (WxDxH): 210 x 245 x 65 mm Weight: 1.1 kg

High voltage power supply with constant voltage, constant current or constant power regulation mode.

With his modular electronic components the EN SL LC power pack with HV-Output and an integrated HV-t (more)ransformer guarantees a service-friendly power supply. The EN SL LC power pack comes with two high-voltage connections and was designed to provide Haug ionizing system with the required voltage. This power pack works ideally with Haug ionizing products, such as ionizing bars, air gates, ring ionizers etc. Do not place the power pack on a surface generating or radiating heat and avoid installation location exposed to direct sunlight. Dimensions (HxWxD): 170 x 110 x 100 mm Weight: 10 kg

Hoefer EPS 2A200 Electrophoresis Power Supply. Two plugs. Maximum voltage 200V. Maximum current 2000 (more) mA. Maximum wattage 200 W. Timer.

Accuris myVolt Mini Power Supply The Accuris myVolt Mini is a compact electrophoresis power supply i (more)deal for basic, constant voltage applications. Users can select constant 100V or 200V output, and the current can reach a maximum of 200mA. Two sets of output jacks are available to connect up to 2 gel rigs and these small power supplies can securely be stacked for use with additional gel rigs. INCLUDED: The Accuris myVolt Mini Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Series 3 digital force gauges are designed for tension and compression force testing in numerous app (more)lications from 0.5 N to 500 N. The gauges feature a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges’ features and configurable parameters. USB output is provided for data collection purposes. Set point indicators are provided for pass-fail testing. The gauges are overload protected to 200% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. An ergonomic, reversible aluminum housing allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 3 digital force gauges are directly compatible with Mark-10 test stands, grips, and software.

Capacity: 610 g Readability: 0.01 g Repeatability: 0.01 g Linearity: ± 0.02 g Pan size: ø 180 mm Dim (more)ensions (WxDxH): 245 x 321 x 89 mm Weight: 3.6 kg

Memmert IN55 Natural Convection Incubator 53L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 53 L Features - 53 L (1.8 cu.ft.) stainless steel chamber designed for efficient sample storage - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature monitoring - ControlCOCKPIT with SingleDISPLAY and adaptive digital PID-microprocessor controller for accurate control - Natural convection system ensures consistent and even heat distribution throughout the chamber - Electronically adjustable air flap for controlled pre-heated fresh air admixture - Autodiagnostic system with adjustable overtemperature monitor for enhanced safety - Max chamber load capacity of 176 lbs with easy-to-clean, durable stainless steel interior The Memmert IN55 Natural Convection Incubator 53L, 115V is designed to deliver precision and reliability for low-temperature applications in laboratory environments. Featuring a 53 L (1.8 cu.ft.) stainless steel chamber, this incubator provides efficient sample storage and maintains a temperature range from at least 5°C above ambient to +80°C. Equipped with a high-precision Pt100 sensor in a 4-wire circuit, the unit ensures stable temperature control, managed through the ControlCOCKPIT SingleDISPLAY with an adaptive PID-microprocessor for quick adjustments. The natural convection system promotes even heat distribution, while an electronically adjustable air flap allows optimal fresh air intake. The durable, easy-to-clean interior supports a maximum load of 176 lbs, and the built-in autodiagnostic system with an adjustable overtemperature monitor enhances operational safety, making it an ideal choice for research and development, pharmaceuticals, and food technology applications. INCLUDED: The Memmert IN55 Natural Convection Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.