Invitrogen Life Technologies Power Ease 500 Power Supply

Bucher Hydraulic Power Supply (QT-34-016R) This item was removed from a university where it was surp (more)lus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The previous owner assured us it was in working order. This item is fitted with a 32 amp red 4 pin plug. Specifications: - Model: QT34-016R - Serial No.: 27361952 - 3 Phase Induction Motor - Type: Y160L - No.: 381 010

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W

2 TEC Transformers 1 x 3.5 kva 3 phase 440v to 200v, 1 x 1.84 kva 240v to 115v These items were remo (more)ved from a university where they were surplus to requirement. Both items are in good cosmetic condition. The smaller 1.84 kVA transformer was tested and found to be operational with a 115-volt power tool on both outlets.No testing was carried out on the larger transformer due to the higher voltage and internal hard-wiring required on the output. Further details regarding each Transformer: TEC 3.5kva three phase transformerSerial No. APR133Primary Volts 440 Secondary Volts 200Input plug red Walther type 210 16 ampsIsolation switchSupplies a very stable supply, designed for stepper motors, CNC machines, and servo equipmentSits on four castors for easy movementDimensions L x W x H 48 x 46 x 41cmsWeight 75kg TEC 1.84kva single phase transformerSerial No. APR135Primary Volts 240 Secondary Volts 115Input plug blue 16amp 3-pin plug 200-250 voltsDual output sockets Mennekes yellow 16amp 3-pin type 1362RS 100-130 voltsDimensions L x W x H 34 x 21 x 29cmsWeight 30.1kg

Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply Transfer Area Up to 14 x 16 cm Maximu (more)m Power Settings 30 V, 500 mA, 15 W Maximum Gel Capacity 4 Mini Gels Features - Intelligent built-in power supply—prevents the stack from overheating by monitoring the transfer status - Requires minimal current—does not generate excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent build up of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE70XP Semi-Dry Transfer Unit with Built-In Power Supply is an innovative system designed for the rapid and efficient transfer of proteins from polyacrylamide gels onto nitrocellulose or PVDF membranes. Featuring an intelligent built-in power supply, the TE70XP monitors transfer status in real-time, automatically halting the process to prevent overheating of the stack. With a 14 x 16 cm transfer area, the TE70XP accommodates up to four mini gels in a stacked format, allowing for high-throughput transfers without compromising quality. This semi-dry transfer unit is equipped with durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent results. Vented electrodes prevent bubble buildup, enhancing the reliability of each transfer. Designed to minimize buffer requirements, the TE70XP reduces reagent costs and preparation time, making it a cost-effective solution for busy labs. Its robust construction includes a molded base with a platinum-coated titanium anode and a hinged lid with a stainless steel cathode, ensuring long-lasting performance. INCLUDED: The Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply includes: - Molded Base with Platinum-Coated Titanium Anode and Internal Power Supply - Hinged Lid with Stainless Steel Cathode - Blotting Paper (14 x 16 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (16.5 x 18.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Power supply Data Test Atom 500. Of 0 to 500 V. the Four outputs of connection. Specifications: 220 (more) V; 50 Hz

This listing is for a Grifols DG-224 Blood Typing Solution. The unit is in full working condition a (more)nd is ready for immediate release. The Grifols DG-224 is a sophisticated diagnostic instrument designed for use in clinical laboratories, particularly in blood typing and antibody investigations. It is an integral part of the DG Gel system, which employs column agglutination technology (CAT) to deliver precise and reliable testing results. Below are detailed insights into the features and specifications of the DG-224. Key Features: Manual Testing System: The DG-224 delivers efficient testing procedures, making it suitable for both patient and donor testing while maintaining a comprehensive assay menu. Compatibility with DG Gel Cards: This instrument works exclusively with DG Gel cards, which utilize 8-column gel technology to facilitate accurate blood group typing and detection of unexpected antibodies. Load Capacity: The DG-224 is designed to accommodate up to 24 DG Gel cards, allowing for high-throughput testing in busy laboratory environments. Removable and Interchangeable DG Spin Head: The device features a unique spin head that can be easily removed and replaced, ensuring ease of maintenance and versatility. Pre-Programmed Centrifugation Conditions: The DG-224 includes pre-set centrifugation parameters specifically optimized for use with DG Gel cards. Centrifugation Speed: The instrument operates at a centrifugation speed of 990 rpm ±10 rpm, ensuring effective separation and analysis. Digital Display and Alarm System: The DG-224 is equipped with a digital display for easy monitoring of the testing process. It also features an alarm system to signal any operational issues. Safety Features: Built-in safety systems include out-of-balance control to prevent misuse in case of improper loading and detection mechanisms for door opening during operation, enhancing user safety. Technical Specifications: Voltage: 100-240V, allowing for use in a variety of international settings. Frequency: 50-60 Hz, compatible with global power specifications. Maximum Input Power Consumption: 50 W, indicating low energy consumption. Fuses: Requires 2 x T 2A L 250 V fuses.

This Mettler Toledo Titrator  Model - DL21 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but we were unable to test it further at our facility. It is in reasonable cosmetic condition but the button panel is loose and needs to be glued back on. It's supplied with a serial cable.

This Roche Diagnostics Corporation LightTyper 96 Genotype Analyzer was removed from a university lab (more) where it was surplus to requirements This item is in good cosmetic condition and powers up, but we are unable to test it further.

Panasonic MDF-U443-PE Biomedical Freezer Lab This item was removed from a university where it was su (more)rplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Features: 4 x Shelves: 53 x 61 cm

Bruker  MicrOTOF-Q ll Mass Spectrometer This was removed from a university lab where it was sur (more)plus to requirements. This Bruker Spectrometer is for spares or repairs. The previous owner has had an engineer report that states a new turbo pump, communications board for the pump and other PCBs are required. It is in excellent cosmetic condition with only minor marks but is sold for spares/repairs. Model QT 0201 G 003Serial No. 228888.10222Year 2009 The unit powered on with the cooling fan operational and a red light showing on the STATUS indicator.No other testing carried out.