Accuris E2100 myVolt Mini Power Supply

Voltage: 100V Current: 0.1A Power: 10W Single Output Analog Display

Riello S3T 20 XTD T5 Power Supply Lab This item was removed from a university where it was surplus t (more)o requirement. It is in reasonably good cosmetic condition, we are unable to test it as it was originally hardwired and has since had its power housing removed.Therefore, it is listed as Spares/Repair. Power supply cable not included.

Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply Transfer Area Up to 14 x 16 cm Maximu (more)m Power Settings 30 V, 500 mA, 15 W Maximum Gel Capacity 4 Mini Gels Features - Intelligent built-in power supply—prevents the stack from overheating by monitoring the transfer status - Requires minimal current—does not generate excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent build up of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE70XP Semi-Dry Transfer Unit with Built-In Power Supply is an innovative system designed for the rapid and efficient transfer of proteins from polyacrylamide gels onto nitrocellulose or PVDF membranes. Featuring an intelligent built-in power supply, the TE70XP monitors transfer status in real-time, automatically halting the process to prevent overheating of the stack. With a 14 x 16 cm transfer area, the TE70XP accommodates up to four mini gels in a stacked format, allowing for high-throughput transfers without compromising quality. This semi-dry transfer unit is equipped with durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent results. Vented electrodes prevent bubble buildup, enhancing the reliability of each transfer. Designed to minimize buffer requirements, the TE70XP reduces reagent costs and preparation time, making it a cost-effective solution for busy labs. Its robust construction includes a molded base with a platinum-coated titanium anode and a hinged lid with a stainless steel cathode, ensuring long-lasting performance. INCLUDED: The Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply includes: - Molded Base with Platinum-Coated Titanium Anode and Internal Power Supply - Hinged Lid with Stainless Steel Cathode - Blotting Paper (14 x 16 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (16.5 x 18.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Biometra Powerpack p21 electrophoresis power supply. Suitable for electrophoresis and blotting. Anal (more)ogical. One plug. Electrophoresis mode 0 - 60 mA at 0 - 300 V; blotting mode 0 - 600 mA at 0 - 60 V.

The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

Turbidy meter LTP4

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39 This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and is working but would not drop below -70˚C in testing which we don't think is cold enough to consider this s a fully working unit. It is sold for Spares/repairs

Murex Transtig AC/DC 355 Square Wave Welder This was removed from a university where it was surplus  (more)to requirements. We were unable to test the unit as it requires 3 Pin 660 Volts/60 Amps, which we do not have at our facility. It is sold as untested.

Hermle 24 x 1.5/2.0ml Rotor, Hermetically Sealed, for Z216 Series The Hermle 24 x 1.5/2.0ml rotor is (more) a hermetically sealed rotor designed for use with the Hermle Z216 series centrifuge. With a maximum speed of 15,000 RPM and a maximum RCF of 21,379 x g, this rotor can accommodate up to 24 1.5/2.0ml tubes at a 45° angle. The hermetically sealed design of the rotor ensures that samples are protected from contamination during centrifugation, making it an ideal choice for applications where sample purity is critical. INCLUDED: The Hermle 24 x 1.5/2.0ml Rotor, Hermetically Sealed, for Z216 Series includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 4 x 10ml Vacutainer Adapters, Cat. # 022639269 New in box Eppendorf 4 x 10ml Vacutainer Ad (more)apters, Cat. # 022639269 for the A-4-38 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 4 x 10ml Vacutainer Adapters, Cat. # 022637269 are used in Eppendorf 5702/R Centrifuges. INCLUDED: The Eppendorf 4 x 10ml Vacutainer Adapters, Cat. # 022639269 includes: - Full 6 Month Parts and Labor Warranty

Benchmark Roto-Mini Rotator with Tube Holders Benchmark’s new Roto-Mini series of rotating mixers pr (more)ovide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, etc. the mixers include interchangeable tube holders for accommodating all common tube sizes from 0.5ml to 50ml. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing. Included tube holders hold capacities of 11 x 1.5/2ml, 5 x 5-7ml, 5 x 10/15ml, and 6 x 50ml with 24 x 0.5ml. Click Here to View Product Video INCLUDED: The Benchmark Roto-Mini Rotator with Tube Holders includes: - Tube Holder, 11 x 1.5/2.0ml - Tube holder, 5 x 5-7ml - Tube holder, 5 x 10-15ml - Tube holder, 6 x 50ml - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty