Air velocity and flow equipment

Sherwood M851 Air Compressor This item was removed from a university lab where it was surplus to req (more)uirements. The item is in good cosmetic condition, powers on, and is fully functional.

Woods Air Movement Series 28 Fan Wind Testing Tunnel 710/289/1/4 This unit came from an engineering  (more)university. It was used to develop and test for the motor industry. We were assured it was in good working order.  The Flange/Working Section External Dimension 56cm X 56cm Included is a basic working section with two access panels. Approximate size of working section 56cm x 56cm X 100cm. The Fan type is a K. Blackman 28 series. The fan uses 7.5 kw Electric Motor with an inverter control. It is split into 4 sections; Unit 1- Main Fan/Control Unit- 130cmx130cmx175cm.-330 kgUnit 2- Joint Section- 68cmx62cmx86cm.- 24 kgUnit 3-Large Tunnel Section- 217 cmx77cmx149cm.- 150 kgUnit 4- Work Access Unit- 57cmx54cmx81cm.- 22 kg. Please enquire if you would like a delivery quote. The last time when the nozzle calibration was ran for that tunnel and it went up to a measured airspeed of 26m/s (94km/h).

Jun-Air Oiless Piston Air Compressor OF301-4B This was removed from a university lab where it was su (more)rplus to requirements. The unit powers up and is in working order. It is supplied with a manual. It is ing good cosmetic condition with minor marks.

AARIAC Clean Air CLR 20/30 S T UK Compressor Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit had been newly installed in late 2023, so has not seen heavy use. Also included is the following: Nardi Compressor - Dryer 400Installed/Replaced - 23/11/23

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel This was removed from a univ (more)ersity engineering department where it was surplus to requirements. The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling. It is in five sections: Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor. Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters. Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm. Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal. Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.

Ekom DK50 2VS 10bar Industrial Air Compressor with Enclosure This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. The lab confirmed it was working prior to removal.

This listing is for a TSI VelociCalc 5725 Air Velocity Meter.The unit is in full working condition a (more)nd is ready for immidate realese.The TSI VelociCalc Rotating Vane Anemometer 5725 is a versatile instrument designed for measuring air velocity and volume flow rates in various environments. It is ideal for HVAC testing, facility maintenance, and industrial hygiene assessments. The device uses a rotating vane to provide accurate and reliable airflow readings, especially in situations where duct sizes and airflow characteristics may vary.Key Features:Air Velocity Measurement:Range: 50 to 6000 ft/min (0.25 to 30 m/s)Ensures accurate measurements in a wide variety of airflows, from low to high-speed ducts.Volume Flow Rate:Measures and calculates volume flow rates when duct dimensions are inputted into the device.This feature is especially useful for ventilation and HVAC system performance testing.Temperature Measurement:Range: -4°F to 140°F (-20°C to 60°C)Provides air temperature measurements, allowing users to correlate velocity data with temperature.Large Vane Probe:The 100 mm (4 in.) rotating vane is ideal for making spot measurements at supply and return grilles.Provides highly repeatable readings, making it ideal for balancing HVAC systems.User-Friendly Interface:The digital display is easy to read and provides instant feedback on air velocity, temperature, and calculated volume flow rate.The device features intuitive controls, making it simple to operate even in the field.Data Logging Capabilities:Includes data logging for up to 12,700+ samples and 100 test IDs.This feature allows users to record readings for long-term assessments and for generating reports.Adjustable Time Constant:Provides the ability to average fluctuating readings for more stable and meaningful data in turbulent airflow environments.Rugged and Durable Design:Built to withstand field use with a sturdy construction that can endure harsh conditions and frequent handling.Specifications:Air Velocity Range: 50 to 6000 ft/min (0.25 to 30 m/s)Temperature Range: -4°F to 140°F (-20°C to 60°C)Volume Flow: Calculated based on user-input duct dimensionsDimensions: Compact and lightweight design, with a 100 mm (4 in.) vane diameterPower Source: Powered by four AA-size batteries or AC adapter

This listing is for a AirFlow Instrumentation LCA6000RVT Airflow Anemeter.The unit is in full workin (more)g condition and is ready for immidate realese.The AirFlow Instrumentation LCA6000RVT is a high-performance airflow anemometer designed for accurate airflow measurements in various applications, including HVAC systems, industrial environments, and laboratory settings. This device combines advanced technology with user-friendly features to provide reliable data for ventilation and airflow assessment.Key Features:High Accuracy: Offers precise airflow measurements across a wide range, ensuring reliability in various applications.Digital Display: Features a clear digital display for easy reading of airflow data, enhancing user experience and operational efficiency.Multiple Measurement Units: Capable of measuring airflow in various units (e.g., m³/hr, l/sec, cfm), allowing flexibility for different user preferences and standards.Data Logging Capability: Equipped with data logging functionality, enabling users to record and analyze airflow measurements over time.Durable Construction: Built with high-quality materials designed to withstand rugged use in industrial and field environments.User-Friendly Interface: Intuitive controls and interface for easy navigation and operation, reducing the learning curve for new users.Battery-Powered: Portable design powered by batteries, making it convenient for on-site measurements without needing external power sources.Compact and Lightweight: Designed for easy handling and transport, making it suitable for fieldwork and various measurement locations.Specifications:Measurement Range: Covers a broad range of airflow velocities, accommodating different application needs.Operating Conditions: Suitable for use in various environments, including both indoor and outdoor settings.Calibration: Pre-calibrated for accuracy, with options for recalibration to maintain performance over time.