Analysers

This listing is for a DELL PowerConnect 2808 Smart Switch. The unit is in full working condition an (more)d is ready for immidate realese. DELL PowerConnect 2808 Smart Switch The PowerConnect 2808 is an 8-port web-managed switch designed for diverse networking needs, from small workgroups to branch office aggregations. Key Features: Gigabit Ethernet Ports: 8 x 10/100/1000Base-T auto-sensing ports, ensuring high-speed connectivity for devices. Power Efficiency: Incorporates power reduction for short cables or inactive connections, contributing to energy savings. Auto-Negotiation: Automatically negotiates speed, duplex mode, and flow control for optimal performance. Virtual Cable Diagnostics: Uses Marvell’s technology for diagnostics, allowing for easier troubleshooting of connectivity issues. Visual Monitoring: Equipped with integrated LEDs for real-time monitoring of switch status and port activity. High Capacity: Switch Fabric Capacity: Up to 16 Gbps Forwarding Rate: 11.9 Mpps, supporting smooth data transmission. VLAN Support: Supports up to 64 port-based VLANs, enhancing network segmentation and security. Quality of Service (QoS): Provides 4 priority queues per port, utilizing 802.1p and IP DSCP values for traffic prioritization. Link Aggregation: Adheres to IEEE 802.3ad standards, supporting up to 4 link aggregation groups with 4 ports each, improving bandwidth utilization. Security Features: Local passwords and restricted IP addresses ensure secure switch access. Port Mirroring: Allows mirroring of four source ports for effective network traffic monitoring and troubleshooting. DHCP Support: Includes an internal DHCP server and client support for simplified IP address management. User-Friendly Management: Easily configurable via an intuitive web-management interface, with easy upload/download of configurations and switch software. Enhanced Performance: Jumbo frame support for packets up to 9000 bytes, optimizing large data transfers. Network Stability:

This listing is for a DELL PowerConnect 2816 Smart Switch. The unit is in full working condition an (more)d is ready for immidate realese. The PowerConnect 2816 is designed for optimizing network performance in smaller environments, making it an excellent choice for various applications. Key Features: Ports and Interface: 16 x RJ45 Ports supporting speeds of 10/100/1000 Mbps, ensuring robust connectivity for multiple devices. Buffer Memory: Equipped with 2MB buffer memory, allowing efficient handling of network traffic and reducing latency. PoE Support: No Power over Ethernet (PoE) support, meaning external power sources are necessary for PoE devices. Stackable Design: Its stackable feature simplifies network expansion, enabling seamless integration of additional switches as network demands grow. SNMP Support: Supports Simple Network Management Protocol (SNMP), facilitating remote management and monitoring of network performance. Quality of Service (QoS): Offers QoS capabilities to prioritize critical network traffic, enhancing performance for high-demand applications like VoIP or video conferencing. VLAN Support: Supports Virtual Local Area Networks (VLANs), allowing for effective traffic segmentation and isolation, which enhances security and efficiency. Jumbo Frames: Capable of supporting jumbo frames up to 9000 bytes, which can improve data transmission efficiency, especially for large data transfers. Standards Compliance: Complies with various networking standards (e.g., 802.3, 802.3u, 802.3ab, 802.1Q, 802.3ad, and 802.1p), ensuring compatibility with a wide range of devices and networks. Managed Device: Being a managed switch, it allows for detailed configuration, monitoring, and management of network settings, ensuring optimal network performance. Ideal Applications: Businesses and Offices: Suitable for small to medium-sized enterprises needing reliable network performance without unnecessary complexity. Educational Institutions: Perfect for schools that require a robust and manageable network for students and faculty. Retail Environments: Ideal for shops that need dependable connectivity for point-of-sale systems and customer Wi-Fi.

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Perkin Elmer Model: Near Infrared Reflectance Accessory NIRA Module Option Modul for S (more)pectrum OneP/N: L1240050S/N: PODL00121426YoM: 12.2000Description:The Near Infrared Reflectance Accessory (NIRA) is designed for diffuse reflectance measurements of light-scattering solids, liquids, and powders using the PerkinElmer Spectrum One NTS, Spectrum 100N, or Spectrum 400N FT-NIR spectrometers.The NIRA is an intelligent sampling system designed for reflectance measurements of solids and transflectance measurements of liquids. The technique is non-destructive and particularly useful for undiluted powders and granular materials.The accessory can be used for a wide variety of sample types in various containers and includes self-referencing for increased reproducibility and ease of use. It is the ideal accessory for analyzing many sample types including:- tablets- powders- granular solids- blister packs- samples in glass vials- gels- viscous liquidsFeatures and Benefits:- For a wide variety of sample types in various containers- Integrated, zero alignment, zero set-up design. Once locked into the sample compartment the accessory becomes an integral part of the system and is ready to use- Self-referencing (interleaved) functionality increases reproducibility and ease of use- Horizontal sample platform for convenient sample positioning- Wide collection angle and large spot size the most representative sampling- Integrated, high performance stabilized InGaAs detector system standard- Range of optional accessories available for inhomogeneous solids or liquids samples- Removed and replaced in seconds via quick-release lever with automatic parameter setupSpecifications:- Model Compatible With: Spectrum One- Product Group: NIR Accessory- Technology Type: Diffuse ReflectanceItems delivered:- Perkin Elmer Near Infrared Reflectance Accessory NIRA Module Option Modul for Spectrum OneCondition:The item is in very good cosmetic condition. It is 100% functional tested and ready to be operated.

2x EV Sx300 Speakers Lab These items were removed from a university lab where they were surplus to r (more)equirement. They are both in good cosmetic condition, however, we are unable to test them as we do not have the required power supply cables. Power supply cables are not included.

Kramer 16X16 RGBHV & Audio Matrix Model VP-1616 This was removed from a university where it was  (more)surplus to requirements. The unit powers on and is in good cosmetic condition. The Faceplate of the unit can come off via 2x quick-release screws. One of the quick-release screws has snapped on the RHS of the unit leaving the faceplate wobbly. The fans are working but it has not been tested further.

This Jobin Yvon Horiba CCD-3000V Detection Unit was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

This Anritsu Error Detector MP1653A    Model M30278 was removed from a university lab wher (more)e it was surplus to requirements. The unit powers on and is in good cosmetic condition. There are some tape and scuff marks from general use. All buttons and dials are moving freely and appear responsive. The fans are operational.

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB This was removed from (more) a university where they were surplus to requirements. 1x Yamaha RX V1500S/N: Y066054VX 1x Extron MVX 84 VGA AS/N: 33-1023-01 REV C 1x AMX NI-3000 Integrated Controller 1x AMX NFX-Mini 1x Universal Open Rack Cabinet with Wheels, black 1x Jamo D 6SUBS/N: 16211050024 All items are in good cosmetic condition and powered on without issue - The control buttons are fully functional and performing as intended.

Schaffner EMI Measuring Receiver Model SCR 3501 This item was removed from a university lab where it (more) was surplus to requirements. It is in good cosmetic condition, with some marks from use. There is a Mitsubishi 1mb memory card with it. We are unable to power it on as it does not include a power supply, we have also been made away that the internal battery is not included. Therefore, it is listed as Spares/Repair.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. This Bundle includes the following : Audio Speakers : 1 X JVC Stereo1 X Bush Signature Portable Radio/CD Player1 X Grundig Dynamic Sound System1 X Labtec MultiMedia Speaker1 X Orbit Soundbar1 X Tascam DA-P1 Audio Tape Recorder Cameras : 1 X Sony Cyber-Shot1 X FinePix S70001 X FinePix S35001 X Sony HandyCam1 X Samsung Digital Camcorder1 X Samsung HyperDis2 X Video Com - 3374 Projectors : 3 X Sharp XR-30X2 X 3M-17201 X Saville Proslide Solo1 X Saville Projector with case1 X Sony XGA VPL-CX612 X ELMO Omnigraph1 X Hanimex Syllabus1 X Panasonic F200NT XGA1 X Excelvan Mini Led Monitors : 1 X HP Compaq LA1751G1 X LG Flatron L1910S1 X LG Flatron W223451 X EDGE 101 X JVC TM-A1016 Color Monitor Stereo/DVD Players : 1 X Sony Mini Disc 4801 X Sony Mini Disc 4701 X Daewoo DC Hi-Fi Stereo1 X Samsung Hi-Fi Stereo Pal1 X Toshiba DVD/Cassette Recorder DVR20 Miscellaneous : 2 X Neet HDMI Extender3 X Startech 4K DisplayPort Cables1 X Port USB to Serial RS232 Adapter Cables1 X D Digidesign Mini Box 24 X Neutrik BNC Bayonet Plugs 2 X Floppy Disc Readers 1 X Wireless AV Link1 X HD media Player1 X HD Video Processing1 X Canon Microphone Adapter MA3001 X Australian Monitor Dual Phantom Power Supply1 X AJA KL Box1 X Cosmed SAL K46² Telemetry Unit1 X TP Link 5 Part GB Desktop Switch1 X Rotel Stereo Tuner RT-850AI1 X Inter M PA-4000 Amplifier3 X Xbox 360 Kinect7 X DELL PR01X Docking Station4 X DELL PR01X Docking Station Stand7 X Microsoft Natural Ergonomic Keyboard 70004 X Mixed Keyboards

These were removed from a university where it was surplus to requirements. The units power up but ha (more)ve not been tested further. There are warning errors due to no drives being inserted. The units are all in good cosmetic condition.

TDT Tucker Davis Technologies Audio Processing System This system was removed from a university lab  (more)where it was surplus to requirements. All units power on but have not been tested further. The system includes a number of cables. Modules (Front, Top to Bottom):System ID 3035- MA3 Stereo Microphone Amp - RP2.1 Enhanced Real Time Processor - PA5 Programmable Attenuator - SM5 Signal Mixer System ID 2901- MA3 Stereo Microphone Amp - RP2.1 Enhanced Real Time Processor - PA5 Programmable Attenuator - SM5 Signal Mixer Back Units:- Daxten Scout Combo - Parasound Zamp v.3 Zone Amplifier All items are in good cosmetic condition.

This Orbit Marine AL-7100-LCU Local Control Unit was removed from a university lab where it was surp (more)lus to requirements. The unit is in good cosmetic condition with marks from use. It has not been tested.

This Profile Pro 8000 Module Chassis was removed from a university lab where it was surplus to requi (more)rements. The unit powers on and is in good cosmetic condition. Revision. 4.44Interface: 1.228x WDM sources It comes with; 1 x Kaba Micro- E Key Model No. ED9001

Christie Mirage Model S+4K Commercial Projector This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but is displaying with a green tinge. We were unable to get this to change. The lamp has run for 780 hours. It is sold for spares/repairs.

This Agilent E8403A VXI Mainframe with N4872A, N4873A, E4809A, E84918 Modules was removed from a uni (more)versity lab where it was surplus to requirements.  The unit powers up and is in reasonably good cosmetic condition. It is missing one of its feet.

Voltaire ISR-9288 Grid Director This item was removed from a university where it was surplus to requ (more)irement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab This was removed from a u (more)niversity lab where it was surplus to requirements. The cabinet contains the following items. Aerotech A3200 Ndrive CP x 5Serial#1:577057/7Serial#2:577057/6Serial#3:681834/7Serial#4:681834/8Serial#5:681834/2 All appear to be in really good cosmetic condition with no damage. Two of the units are not inside the cabinet. National Instruments Signal Conditioning Connector Block x 2Model: SC-2345 Both have stickers on the front of the itemsSicker on item 1: pH SensorSticker on item 2: Thermocouples Inlet/Outlet Drive Relays There are other small electrical switches and controllers inside.

Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A These units were remov (more)ed from a university lab where they were surplus to requirements. Both units power up but the Pattern generator is showing "INTERNAL CLOCK (OPTION.01)". We are told this is just because they are not linked up. We unfortunately do not have the connecting leads. They are in good cosmetic condition with minor marks from use. 1x Anritsu Error Detector MP1764AModel. M06340 1x Anritsu Pulse Pattern Generator MP1763BModel. M06940

Planar NSI Near-Field Measurement System This was removed from a university lab where it was surplus (more) to requirements. The system comes with HP workstation xw4100 PC with installed Antenna Measurement Software NSI2000 version 4.11.202. It also has installed National Instruments - Measurement & Automation Explorer Version 15.3. Hardlock (dongle) included The system was not used for a few years, the technician who worked with it has retired and it was not used since.  The system is a planar near-field scanner, which measures an aperture of 1.5m x 1.5m. It is designed for high-frequency measurements of antennas. The equipment in the rack, controls the position of the probe and measurements are taken using a network analyser. These analysers are usually supplied by the customer and the one that was used with this system has been removed and is not included.

Pirosecuenciador Qyagen Pyromark Q24. Analysis of 1 to 24 samples/15 min. Includes software on Cd. I (more)nformation transfer by USB. Specifications: