Hakko Electronics Monitouch V810iCD screen

Portable pH / ion meter with InLab Expert Go-ISM Seven2Go Pro's simplified menu, LED status light an (more)d uFocus measurement screen provide users with fast, high-quality data. Seven2Go's easy-to-reach buttons and sleek design ensure comfortable one-handed operation. Seven2Go Pro's IP67 design, sunlight-resistant screen and rugged uGo carrying case ensure reliable data, even in difficult and isolated conditions. ISM® Ready: Reduced chance of errors When any InLab ISM® (Intelligent Sensor Management) sensor is connected, the instrument automatically recognizes the sensor and stores the sensor ID, serial number and last calibration data. Specifications - Seven2Go pH / Ion meter S8-Std-Kit Parameter: pH; Ion; ORP Channel: Single channel Version kit: Ready-to-use measuring kit Sensor: InLab Expert Go-ISM PH measuring range: -2 - 20 PH resolution: 0.001; 0.01; 0.1 Accuracy pH (±): 0.002 Ion concentration measurement range: 1.00E-9...9.99E+9 Ion concentration resolution: 3 or 4 digits (automatic interval) Ion concentration accuracy (±): 0.5% Measurement range mV 0 Resolution mV 0.1; 1 Accuracy mV (±): 0.1 Temperature range (2): -30°C...130°C Temperature resolution: 0.1°C Temperature accuracy (±): ± 0.2°C Portable: Yes Safety and Compliance: GLP; Password protection; User Management Compatible with Intelligent sensor management (ISM): Yes Memory capacity: 2,000 measurements Data transfer: PC Degree of protection: Watertight and dustproof (IP67) Languages: English; Italian; French; Polish; Russian; Portuguese; Chinese; Korean; German; Spanish; Thai; Japanese Ease of Use: Multilingual menu; Calibration support; Backlit Memory size: 2000 measurements mV measuring range: -2,000.000...2,000.000

This listing is for a TSI VelociCalc 5725 Air Velocity Meter.The unit is in full working condition a (more)nd is ready for immediate release.The TSI VelociCalc Rotating Vane Anemometer 5725 is a versatile instrument designed for measuring air velocity and volume flow rates in various environments. It is ideal for HVAC testing, facility maintenance, and industrial hygiene assessments. The device uses a rotating vane to provide accurate and reliable airflow readings, especially in situations where duct sizes and airflow characteristics may vary.Key Features:Air Velocity Measurement:Range: 50 to 6000 ft/min (0.25 to 30 m/s)Ensures accurate measurements in a wide variety of airflows, from low to high-speed ducts.Volume Flow Rate:Measures and calculates volume flow rates when duct dimensions are inputted into the device.This feature is especially useful for ventilation and HVAC system performance testing.Temperature Measurement:Range: -4°F to 140°F (-20°C to 60°C)Provides air temperature measurements, allowing users to correlate velocity data with temperature.Large Vane Probe:The 100 mm (4 in.) rotating vane is ideal for making spot measurements at supply and return grilles.Provides highly repeatable readings, making it ideal for balancing HVAC systems.User-Friendly Interface:The digital display is easy to read and provides instant feedback on air velocity, temperature, and calculated volume flow rate.The device features intuitive controls, making it simple to operate even in the field.Data Logging Capabilities:Includes data logging for up to 12,700+ samples and 100 test IDs.This feature allows users to record readings for long-term assessments and for generating reports.Adjustable Time Constant:Provides the ability to average fluctuating readings for more stable and meaningful data in turbulent airflow environments.Rugged and Durable Design:Built to withstand field use with a sturdy construction that can endure harsh conditions and frequent handling.Specifications:Air Velocity Range: 50 to 6000 ft/min (0.25 to 30 m/s)Temperature Range: -4°F to 140°F (-20°C to 60°C)Volume Flow: Calculated based on user-input duct dimensionsDimensions: Compact and lightweight design, with a 100 mm (4 in.) vane diameterPower Source: Powered by four AA-size batteries or AC adapter

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

This was removed from a university lab where it was surplus to requirements. The system is in reason (more)able cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented. The item is untested as it wasn't supplied with a PSU. Also included are the following:1x Delta-T Devices atmospheric temperature & humidity probeS/N: RHAI-077 1x Delta-T PC software type LS2Version 1.04 1x Desiccant Pack1x DE-9 cable1x Tutorial Kit1x Spares & Accessory Pack3x Component part (EMC directive) 5m 5x Temperature Probes User Manual1x Quantum Sensor User Manual1x Delta-T Devices Data Loggers, Sensors & Systems1x Delta-T Devices Plant Science & Solar Radiation Studies1x Delta-T Devices Image Analysis Systems1x Delta-T Logger User Manual Version 2.01

This listing is for a Grifols DG Therm IncubatorThe DG Therm is a digital incubator designed for eff (more)icient gel card processing. It can hold up to 24 DG Gel cards and 24 test tubes across two independent incubation zones. The on-screen display shows the remaining incubation time and temperature, and it features a programmable alarm and removable trash bin.

Nikon BioStation IM With Parts This system was removed from a university lab where it was surplus to (more) requirements. The unit is in poor cosmetic condition and cannot be powered on or tested as several parts are missing or not connected. Therefore, this system is listed as Spares/Repair.

Pallet scales is stable and proved 4 load cell construction designed for weighing pallets. The load  (more)to be weighed can be placed on the platform by a standard fork-lift truck. Pallet scales H315/4P/H series is manufactured in stainless steel technology. The H315/4P/H series features wheels and handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.