Schaffner EMI Measuring Receiver Model SCR 3501 Lab NOTE - THIS IS A SPARES/REPAIRS ITEM

Manufacturer: Wiltron / Anritsu Model: 34AS50 Adapter DC to > 18 GHz, Impedance : 50 Ohm , GPC-7 to  (more)WSMA ( male ) Description: The 34 Series of precision adapters enable accurate measurements with GPC-7, Type N, or WSMA interfaces.Every adapter is fully specified and 100% tested to ensure low reflections and optimum phase performanceover a broad frequency range. Features: Low SWR and insertion loss; Convenient transition with minimal effect on signal; 50 Ohms impedance. Items delivered: - 34AS50 Adapter DC to 18 GHz 50 Ohm The item is in good cosmetic condition and 100% functional tested.

one Metal Ceramic Planar Triode , NSN 5960-12-165-6996High Power, High Precision Special Purpose TYP (more)E  for Professional and MIL SPECS - Application i.e. in AIRBORNE  PULSE RADAR DEVICES Manuf.  THOMSON TUBES / THALES / EADS Model: YD 1048 manufactured 07/2003 by THOMSON TUBES ELECTRONIQUES ( FRANCE ) ; NEW and originally packed - see PHOTO the here offered tube has much higher specs and reliability than the normal on the market available YD1048s from SIEMENS or others, which are out of old stocks and have been manufactured in the 1970s the tubes are all packed in sealed TULBS with moisture protection and will be delivered in this TULBwe have > 50 units available.....see PHOTO .... please ask for special offer for larger quantities as you can see on the PHOTO of the Purchase document, the tubes were bought for a price of > 900 Euros / per unit description:  ( DATASHEET available as pdf with email, please ask if you want to get one ) metal ceramic construction ..........high power planar triode....... Forced- AIR-cooled......Oxide-cathode; Gold Plated Contactsmax. frequency > 3.5 GHzuse for RF - amplifiers, grid-or plate- pulsed oscillators, frequency- multipliers, switching of high plate voltages;high amplification factor and trans-conductance; special in frequency stability filament with indirect heating  ( Vf)........................................6.3 V....1.35 Apulsed plate voltage.................................................................8.5 kV ( cold 10 kV )average anode current............................................................. 50 mAanode dissipation...................................................................... 250 Wgrid voltage.................................................................................. - 200 Vaverage grid current.................................................................. 18 mAgrid dissipation........................................................................... 1.5 Wmaximum anode temperature................................................. 200 °Cmaximum enveloppe temperature......................................... 250 °Ctransconductance ( S ) ............................................................. 25 mA / V ( typical )amplification factor ( my)........................................................... 105 ( typical ) to 150 ( max)capacitances -  1 MHz capacitance bridge - ......................... Kg1 = 8.8 to 9.8 pF..............g1A = 1.8 to 2.1 pF...............KA = 0.037 pF The Tube is BRANDNEW Originally Packed ......  out of NEW PRODUCTION ; The LOT from which we offer, was manufactured  in July 2003;so tube will be delivered with our 2 years Warranty we have many of these tubes in our stock.... please ask for a pecial offer for larger Quantities

Manufacturer: Agilent / Keysight Model: N2X Chassis N5540A + N5344A DigRF Analyzer Module for DigRF  (more)v4 + N5346A  High Performance Flying Leads Probe for DigRF v4 P/N: MY48424304 NOTICE: THE SOFTWARE IN THE PRODUCT REQUIRES A LICENCE KEY TO OPERATE - THE  KEY FOR N5344A HAS BEEN PRE-INSTALLED ON THE UNIT ANDITS READY TO USE. N2X Chassis N5540A 2-slot Portable Chassis: The chassis provides a convenient platform for testing scenarios where  portability or small size is a factor. Two different card types can be configured simultaneously allowing for test scenarios that use a  combination of port types. • Hot-swappable test cards• Multi-user, remotely accessible• Support for SONET/SDH, POS, ATM, Ethernet, FR and Fibre Channel interfaces• Capable of daisy-chaining up to 60 chassis, time synchronized to 10 ns• Hundreds of test ports available in one system• Completely backward compatible with existing RouterTester 900, OmniBER XM and  SAN Tester hardware and software N5344A DigRF Analyzer Module for DigRF v4: The Keysight N5344A DigRF exerciser module belongs to the Keysight RDX family. The module transparently monitors DigRF v4 bus activity, helping digital and RF  engineers integrate and troubleshoot devices incorporating the DigRF digital serial bus across a wide variety of over the air standards. The  analyzer module allows engineers to work in the domain (Digital or RF) of their choice to quickly characterize the DUT´s digital and wireless behavior.  It operates in conjunction with Keysight vector signal analysis software. Key Features & Specifications: • Support DigRF v4 bus specifications• Support speeds up to 3Gb/s, with single or multi-lane configuration• Full protocol decoding capabilities• Extracts and transfers digital IQ for analysis with 89600B VSA software Analyzer features and operation: • Simultaneously acquires Tx/Rx bidirectional traffic• Tracks changes across all speed modes – sleep, low power and high speed• Displays data and control packets at the protocol level• Triggers on protocol-specific packets, specific bits within a packet, and  protocol violations N5346A High Performance Flying Leads Probe for DigRF v4: The DigRF Flying Leads probe makes it possible to access DigRF links with no  integrated connectors, at rates up to 3Gb/s. With very low capacity loading, the probe enables you to monitor the DigRF protocol in space constraint designs,  without influencing the monitored signals. Key Features & Specifications: • Low capacity loading, enables insight without influencing the monitored  signals• The probe amplifier is outside of the probe tip, ensuring the probe tip size  is kept to a minimum to address space restraints and also thermal concerns• The probe can be used with single lane or multilane bus configurations• Both Tx and Rx lines can be probed with a single N5346A flying lead set.• Keysight provides a unique probe portfolio for DigRF bus standards, including  the Soft touch probe and Flying leads probe NOTICE: THE SOFTWARE IN THE PRODUCT REQUIRES A LICENCE KEY TO OPERATE - THE  KEY FOR N5344A HAS BEEN PRE-INSTALLED ON THE UNIT ANDITS READY TO USE. Items delivered: - N2X Chassis N5540A 2-slot Portable Chassis- N5344A DigRF Analyzer Module- N5346A High Performance Flying Leads Probe- Power Cord The whole system is in good cosmetic condition and is 100% functionl tested.  Ready for your use.

Manufacturer: Anite Model: B4605 / 100 Combiner Revision No.  1.1Options: 0001. 0002 S/N: 0137 With  (more)OCXO Reference Oscillator 10MHz Outputs (3 Qty) Items delivered: - Anite B4605 / 100 Combiner- Power Cord The combiner is in very good cosmetic condition and 100% functional tested

Manufacturer: Rohde & Schwarz, München Model: ABFS Fading Simulator P/N: 1114.8506.02 Description: T (more)he Baseband Fading Simulator R&S®ABFS generates signals that simulate  real receive conditions in mobile applications. Thus, the response of receivers under real-world conditions can already be checked during development and QM  acceptance testing. The simulation of fading signals at baseband level reduces  costs. The Noise Generator R&S® ABFS-B1 (Option installed) adds a noise source  to the output of the fi rst channel so that noise can be simulated in the frequency band used. The noise generator can be switched on or off irrespective  of the operating modes of the basic version. The optional Second Fading Simulator R&S® ABFS-B2 (Option installed)  offers two extra channels with the same characteristics in addition to the two  channels of the basic model. The optional Second Noise Generator R&S® ABFS-B3 (Option  installed) provides an additional noise source for a further output. This second noise generator is either assigned to the second channel of the  basic R&S® ABFS (with the first Noise Generator R&S® ABFS-B1 for the first  channel) or to the first channel of the Second Fading Simulator R&S® ABFS-B2 (Option  installed).Fading profiles such as Rayleigh, Rician, pure Doppler, Lognormal or Suzuki can  be assigned to each of the propagation paths irrespective of the selected  circuit. In addition to the fading profiles mentioned, the following parameters can be  defi ned for each propagation path: • Path attenuation• Delay time• Doppler frequency or speed between transmitter and receiver• Coupling to another channel• Preprogrammed fading models• Many fading models have already been programmed in ABFS. The user can quickly  recall these default settings and also modify the parameters. Options installed: • ABFS-B1 1115.0009.02• ABFS-B2 1115.0309.02• ABFS-B3 1115.0609.02 Items delivered: - Rohde & Schwarz ABFS Fading Simulator- Power Cord- Instruction Manual as PDF via E-Mail The fading simulator is in excellent cosmetic condition and comes out of  operation. We sell it here as 100% functional tested.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW