Hermle Z366 K Refrigerated Centrifuge w/ Swing Out Rotor

Magfuge HEATHROW Centrifuge / Magnetic Stirrer - Gray / Purple New equipment in its original packagi (more)ng 3L centrifuge and magnetic stirrer in one device Part Number: 120581 Dimensions: 23.5 x 18.5 x 12 cm Ambient conditions: Use temperature: 2 to 40°C Weight: 1.85 kg Color: Gray / Purple Stirrer detail: ø plate: 130 mm Stirring capacity: 3 l Speed: 50-999 rpm (increment of 1); 1000-2500 rpm (increment of 5) Timer: Stirring mode -> 30 seconds to 60 minutes or continuous (5 second increment) Oscillation mode -> 1 second to 60 minutes or continuous Oscillation mode -> 30 seconds to 15 minutes Centrifuge detail: Rotor 12 tubes 1.5/2ml or rotor 6 tubes 5ml Speed: 500-999 rpm(increment of 1); 1000-5000 rpm (increment of 5); 5000-12500 rpm (increment of 25) Timer: 30 seconds to 30 minutes (5 second increment) Delivered with : a rotor for magnetic stirring 1 rotor for 12 tubes of 1.5/2 ml 1 rotor for 6 tubes of 5 ml 12 adapters for 0.2 ml tubes 12 adapters for 0.5 ml tubes 2 PTFE magnetic bars 40 x 12 mm 2 silicone mats suitable for the magnetic stirring lid AC adapter

Max capacity: 4x 400 mL Max density: 1.2 kg/dm³ Max speed: 11000 RPM Max force: 13800 RCF Max kineti (more)c energy: 35000 Nm Dimensions (WxDxH): 580 x 690 x 410 mm Weight: 55 kg Equipped with: 1x Hettich 4394 Swing out rotor (max 4000 RPM) 4x Hettich 5051 bucket 4x Hettich 5268 insert (Capacity: 5 mL, Dimensions (ØxL): 12 x 81 mm)

Speed range: 0 to 15500 rpm in 100 rpm increments Timer: up to 9 hr 59 min or continuous Temperature (more) setting: -20°C to 40°C in 1°C increments Temperature operating range: 2°C to 40°C Acceleration: 10 profiles Deceleration: 10 profiles Dimensions (WxDxH): 460 x 707 x 370 mm Weight: 78 kg Equipped with: 1x S2096 Microtiter rotor (max 3000 rpm) 2x S2096 Carrier 1x SX4250 Swing out rotor (max 4500 rpm) 4x SX4250 Bucket 4x 392264 Lid 4x 392255 Insert (1x 250 mL capacity)| 4x 368338 Insert (4x 50 mL capacity) 4x 368331 Insert (12x 15 mL capacity)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

SHIMADZU 20A and 10A HPLC Module Set Liquid Chromatography Modules (HPLC) Brand: SHIMADZU CTO-20A: C (more)olumn Oven (27Kg) CBM-20A: System Controller (6Kg) SPD-20A: UV/Visible Detector (13Kg) SIL-10ADvp: Autosampler (SIL-10AD) with error message "ERR 6PV HOME) (20Kg) LC-10AS: Pump (12Kg) LC-10ATvp: Pump (LC-10AT) (13Kg) FCV-10ALvp: Low Pressure Gradient (FCV-10AL) (6Kg) Tank (5Kg) DEGASYS DG-2410 (5Kg) Computer (9Kg) Software + Dongle (5Kg) Instructions for each module (12Kg) Accessories (7Kg) Equipment not tested Gross Weight: 140 Kg Net Weight: 175 Kg

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Fast and Stable Measurement It only takes a second for the balance to display the final measurement  (more)result. Weighing Heavy Loads with High Accuracy On the large weighing pan of a PM balance, you can weigh a load of 120 kg with a readability of 0.2 g and second-to-none repeatability. Minimum Eccentricity Error Over the Entire Range PM balances can be used to determine the mass of irregularly shaped components with a centre of gravity that is significantly shifted from the weighing pan axis. Parameter Stability Over Time and After Transport The mechanical design is resistant and robust, allowing you to maintain the correct metrological parameters after transport and despite long and intensive use. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.01 g on the 200 x 185 mm weighing pan and with a readability of 0.2 g on the 500 x 400 mm weighing pan. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails New, lmproved The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. 5Y Terminal With Terminal 5Y you get a 10-inch display, Digital Weighing Auditor, multi-step user verification, ambient light alerts, hotspot, RFID*, live note voice and text notes, voice commands for the balance and handy measurement history within the handy library widgets Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Thermo Scientific 75003424 Fixed Angle Rotor The Thermo Scientific 75003424 Fixed Angle Rotor, is a  (more)centrifuge rotor designed for use with the Thermo Scientific™ MicroCL 17/17R and 21/21R Microcentrifuge Series centrifuges. This rotor has a maximum speed of 14,800 RPM and a maximum relative centrifugal force (RCF) of 21,100 x g. It can accommodate a maximum capacity of up to 24 x 1.5mL microtubes, making it suitable for low sample volume biological applications. INCLUDED: The Thermo Scientific 75003424 Fixed Angle Rotor includes: - 75003424 Fixed Angle Rotor - Click Seal Biocontainment Lid - 6 Months Parts and Labor Warranty Thermo Scientific 75003424 Fixed Angle Rotor SpecificationsMaximum Speed14,800 RPMMaximum RCF21,100 x gMaximum Capacity24 x 1.5mL micro tubesMaximum Radius8.6 cmMinumum Radius5.1 cmCentrifuge CompatibilityThermo Scientific™ MicroCL 17/17R and 21/21R MicrocentrifugesDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote .downloads-section { justify-content: center; }

Scilogex Fixed Angle Rotor 5mL x 18 The Scilogex Fixed Angle Rotor 5mL x 18 has the capacity to acco (more)modate 18 x 5mL tubes and can a reach maximum speed of 15,000RPM. For use with the DM0636 centrifuge. INCLUDED: The Scilogex Fixed Angle Rotor 5mL x 18 includes: - Cover - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris MP9600-200PH 5-200uL Pipetting Head for AutoMATE The Accuris MP9600-200PH is a versatile pip (more)etting head designed for the AutoMATE series, capable of handling volumes from 5 to 200uL. It ensures high precision and accuracy across its range, with an accuracy of ≤ 5% at the smallest volume of 5uL, improving to ≤ 1% at volumes of 100uL and 200uL. Precision is equally impressive, with measurements as low as ≤ 3.5% at 5uL and reaching up to ≤ 0.4% at 200uL. This pipetting head is ideal for applications requiring meticulous volume control and repeatability, making it a valuable tool for laboratories focused on bioresearch and analytical chemistry. INCLUDED: The Accuris MP9600-200PH 5-200uL Pipetting Head for AutoMATE includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty