Hoefer SUB25 Maxi-Plus Standard Submarine Gel Electrophoresis Unit

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The iBlot 2 Gel Transfer Device is an integral part of the iBlot 2 Dry Blotting System, which consis (more)ts of the transfer device and consumable transfer stacks that contain the required buffers and transfer membrane (nitrocellulose or PVDF). Complete protein transfer in 7 minutes or less High detection sensitivity and even transfer Increased blotting reliability and reproducibility Flexible gel size formats and membrane types A simple, user-friendly system Options to create new custom programs Built-in tutorial and application notes High-quality transfer stacks that are more compact than before Rapid, High-quality Protein Transfers For dry electroblotting of proteins from mini-, midi-, and E-PAGE gels onto nitrocellulose or PVDF membranes for Western detection Offers high-quality transfer, convenience, and speed, producing crisp, clear bands that remain sharp and straight, with exceptional transfer efficiency Allows users to create custom programs Membrane Compatibility: Nitrocellulose, PVDF Throughput: 1 Midi or 2 Mini Gels Running Dimension: Horizontal For Use With (Application): Western Blot Gel Compatibility: Bolt Bis-Tris Plus Gel, E-PAGE Gel, Novex Midi Gel, NuPAGE Gel, Novex Mini Gel Mode of Transfer: Dry Running Time: ∼7 min Dimensions: 370 x 200 x 110 mm Weight: 2.3 kg

The model 250EX electrophoresis power supply is intended to be used with electrophoresis devices des (more)igned to operate at or below 250 volts and 500 milliamps. Four sets of output connectors operate in parallel to provide a constant voltage (10 – 250 V) or constant current (10 – 500 mA), the maximum power output is 125 watts.

The nanoPAC Mini Power supplies are an ultra compact and economic unit ideal for use with DNA (Horiz (more)ontal) and Protein (Vertical) electrophoresis systems. With enhanced features, such as a maximum constant voltage up to 300 and maximum constant current output of 400mA. The nanoPAC’s user- friendly interface is easily adjustable in 1V and 1mA increments, making it perfect for separations where precise settings are required. Its ultra compact size and two pairs of parallel power terminals, which can run two electrophoresis units simultaneously, save time and bench space. Maximum Voltage: 300 V Maximum Current: 400 mA Maximum Power: 60 W Number of Output Pairs: 2

Including Three-Tier Cell Roller Base Capacity : 821.2L Cabinet Material: Cold-rolled steel, powder- (more)coated cabinet Shelves: 6 supplied  (19 max.) Temperature ramp and soak, up to 24 steps Temperature Range: 0° to 60°C Temperature Resolution: 0.1°C Temperature Uniformity: ±0.3 at 25° to 37°C Temperature Sensor: RTD Temperature Accuracy: ±0.1 at 25° to 37°C Compressor: 1/4hp, air-cooled Relative humidity control via steam generator from above ambient to 95% at 37°C Heat Output: 1750W (6000 BTU/hr.) at 220V Adjustable defrost timer; factory set for two 15-min. defrost cycles/24 hr. Refrigerant: CFC-free, R134A Certifications/Compliance: ICH, FDA, TAPPI, ASTM™ Dimensions (d x w x h): 782mm x 1011mm x 2034mm Dimensions Internal (d x w x h): 686mm x 787mm x 1524mm 220V / 50Hz Three-Tier Cell Roller Base (15 positions) Dimensions (d x w x h): 620mm x 757mm x 706mm 220-240V / 50-60Hz

This Solartron Schlumberger 1286 Electrothermal Interface was removed from a university lab where ti (more) was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

This Thermo Scientific Histostar Tissue Embedding Centre was removed from a university lab where it  (more)was surplus to requirements. The unit powers on and has been tested. It is in working order. The screen is slightly faulty but is still readable. There are lines through the display. The wax melting tank and lights have been tested and are working. It is in reasonably good cosmetic condition but has some marks from use. There are some trays of accessories included.

This was removed from a university lab where it was surplus to requirements THe unit powers up but s (more)hows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal. It is sold for spares/repairs. No rotor included.

Yamato LR-500A Overhead Stirrer with 75mm 4-Blade Propeller, 115V Speed Range 34~340rpm Max Torque  (more)1.96/N•m (20/kgf•cm) Motor DC Brushless Motor 70W Features - DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required - Direct-drive system reduces noise and require low maintenance - Achieves high torque enabling stirring of high viscosity solution - Digital tachometer for easy speed setting and confirmation - Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically - Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples) Digital laboratory stirrer with speed range of 34-340 rpm for high viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples). INCLUDED: The Yamato LR-500A Overhead Stirrer with 75mm 4-Blade Propeller, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty