Radwag MA 210.X7.A Moisture Analyzer

F2 Mass Standard - carrier weights. Nominal value - 5 kg.

M1 Mass Standard - knob weights - set (1 mg - 10 kg), plastic box.

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The case has been designed for safe transportation of the 5Y.PM scales. It is equipped with two hand (more)les for convenient carrying so that the device can be transported by two people at the same time (recommended). The interior of the case has been adapted to fit all device components, with this it can be carried without the risk of damage. The case is made of 6 mm thick plywood. It features reinforced corners, aluminium trim, and hard dark foam filling. The case comes as an accessory.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Capacity: 3600 g Readability (0 – 600 g): 0.01 g Readability (600 – 3200 g): 0.1 g Repeatability: 0. (more)01 g Linearity: 0.02 g Stabilization time: 1.5 s Weighing pan: 170 mm Dimensions (LxWxH): 315 x 195 x 85 mm Weight: 5.5 kg

This listing is for 1 of 4 Kinbio Tech YK1225-Shanghai Assembly Roller Conveyor

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

FiveEasy FP20-Std-Kit pH meter METTLER TOLEDO Thanks to FiveEasy's intuitive operation, elegant desi (more)gn and simple data export functions, you can measure in complete comfort. Ideal for laboratory applications, the FiveEasy and FiveEasy Plus worktables provide high-quality pH/mV or conductivity measurements with a simple click. Compact in design and equipped with various data export capabilities, the FiveEasy series instruments are the perfect companion for obtaining reliable measurement data, at an excellent quality/price ratio. SIMPLE MEASUREMENT Impeccable pH measurements, fast and efficient thanks to a large, well-structured display and an intuitive button layout. COMPACT, SPACE-SAVING DESIGN Thanks to its compact design and removable sensor holder (stowable on the side of the meter), the instrument takes up little space on the workbench. The rectangular structure allows easy stacking of the instrument and is very light: only 0.63 kg for 227x147x70 mm of dimensions. WHY "P" PLUS? The Five Easy Plus pH-meter automatically recognizes the buffer solution, thus avoiding possible calibration errors; has a higher pH and temperature range; higher accuracy; calibration storage of up to 200 measurements; RS232, USB connection. Specifications - FiveEasy pH meter FP20-Std-Kit Once you have purchased the product, you will find simple and clear videos on how to set up and calibrate your FiveEasy ph-meter:

Beam scales H315/4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the H315/4P2/H scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales H315/4P2/H series is manufactured in stainless steel version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 in stainless steel housing, featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

VACUUBRAND MD 1C +AK+EK Chemistry Vacuum System Ultimate Vacuum 2 mbar Max. pumping speed at 60 Hz (more) 0.88 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and very low vibration - Excellent environmental friendliness due to efficient solvent recovery This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors. This system is usable for increased vacuum requirements with high boiling solvents and often replaces rotary vane pumps. Typical applications are rotary evaporators and vacuum drying ovens. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment.INCLUDED: The VACUUBRAND MD 1C +AK+EK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty