Elga PureLab Flex Model-PF2XXXXM1 Lab

Maximum Temperature Homogeneity The aluminum alloy plate ensures a formidable temperature homogeneit (more)y over the entire surface of the plate itself, up to 370°C Low Profile, Attractive Design RC offers an innovative low profile and highly attractive design for greater user comfort. Even the inclination of the front panel has been carefully studied to facilitate its use. - Uniform heat distribution with coated aluminum alloy heating plate - Excellent chemical resistance - Maximum temperature 370°C - Accepts beakers up to 15 liters - Choice of mains voltage / frequency model - Control panel shielded against spills - Designed for maximum durability and backed by a 3-year warranty

Vinitex Plinth Cabinet for Fume cupboard with Wheels behind 550x520x810

Labconco CentriVap Acid SystemVacuum Concentrator: Acid-Resistant benchtop type with glass lid B (more)rushed stainless steel and glacier white, powder-coated steel exterior with blue accents 300w heater with heat from OFF to HI (100C) in one degree increments and heat time from 1 to 999 minutes PTFE-coated chamber with Hastelloy shaft Cold Trap: HCFC/CFC-free refrigeration system with 1/3 hp compressor lowers cold trap to -50C Temperature graph that illuminates green when the collector coil reaches operating temperature INCLUDED: The Labconco 7983013 CentriVap Acid System, 115V, 60Hz includes: - Acid-Resistant Benchtop Vacuum Concentrator - Cold Trap -50°C - Clear Canister 7460900 - Acid Insert 7814800 - 12-13 mm Acid-Resistant Rotor 7455101 - Glass Trap 7397605 - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo CORIO CP-BC12 Heating Circulator, 115V/50-60Hz Working Temperature Range 20°C - 200°C Heating (more) Capacity 1000W Fluid Type Water, Silicone Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over between internal and external circulation - USB & RS232 connection - High-quality bath tanks made of stainless steel with bath lid and drain tap - Integrated cooling coil for counter-cooling CORIO™ CP heating circulators are suitable for temperature applications to 200 °C with circulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CP circulator incorporates easy change-over for control of fluid circulation internally or externally.Pump inlet/outlet fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. Systems include insulated stainless-steel tanks with integrated cooling coil and drain ports. Bright LED display with easy to use interface including USB and RS232 connections for external PC control and data-logging. PID temperature control provides ±0.02 °C stability. Adjustable centrifugal pump capacity of 8-27 L/min with pressure from 1.5-10.2 psiClass III (FL) according to DIN 12876-1INCLUDED: The Julabo CORIO CP-BC12 Heating Circulator, 115V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Bath Lid - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Branson Extension 3/4” dia. With replaceable tip 101-148-009 Branson Extension 3/4” dia. (with repla (more)ceable tip 101-148-009), 108-009-633 for Branson Sonifier SFX250, SFX550, 250 & 450 cell disruptors.INCLUDED: The Branson Extension 3/4” dia. With replaceable tip 101-148-009 includes: - Manufacturer's Documentation Request a Formal Quote

Benchmark B2402 BeadBath Duo, 2L bath, 115V The BeadBath Duo series are the first laboratory baths d (more)esigned for precision temperature control when used with water, or with (the increasingly popular) Lab Armor® thermal beads. Unlike any other laboratory bath, they feature a “MODE” button that can be used to toggle between “Bead” or “Water” mode. Choosing the correct mode will automatically adjust the operation and balance of the multiple internal heating and sensing elements to ensure optimal performance. The result is one combination bath that is suitable for accurate, and uniform temperature control in either condition. While the majority of research laboratories today are using water baths, many prefer the convenience of bead baths due to the advantages listed below. With the BeadBath Duo, the lab gets the best of both worlds, allowing conversion from one bath type to the other, with the simple press of a button. INCLUDED: The Benchmark B2402 BeadBath Duo, 2L bath, 115V includes: - Lift-Off Lid - Power Cord - Operator's Guide - Manufacturer Documentation - 2 Year Manufacturer's Warranty

New generation! The OHAUS Scout Scale, with its large backlit LCD display and integrated educational (more) software is the ideal tool for use in the classroom. Offering world-class overload protection, fast stabilization times, increased capacity, more connection options, and a stackable design—the ultimate educational weighing experience. - Excellent overload protection and practical stackable design - Backlit LCD display and 4-button operation: very easy to use in all conditions - High weighing speed and high resolution display The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options ensure a more modern and smarter student experience, increasing accuracy and efficiency. Other Standard Features and Equipment Transport lock, stainless steel weighing pan, menu and adjustment lockout switch, software and mechanical overload/underload protection, stability indicator, auto tare, low battery indicator, auto power off user selectable print options and communication settings. Applications Weighing: allows you to calculate the weight of the samples in the selected unit of measure. Density determination: calculation of the density of solids or liquids. With the built-in weigh below hook, you can test for the specific gravity of objects that cannot be placed on the weighing pan. Molar Concentration: Calculate the mass of a sample and automatically convert to the molar concentration. MODELS AVAILABLE: Applications Weighing, determination of density, weighing of moles Screen Liquid crystal display (LCD) with backlight Operation AC adapter (included) or 4 AA batteries (not included) Communication RS232, USB host, USB device, Ethernet or Bluetooth™ (available as an accessory) Construction ABS housing, stainless steel bowl, ABS draft shield (1 mg model only), bottom weigh hook, transport lock, manual calibration lock switch, security slot Project features Stability indicator, stackable design with storage lid included (excluding 1 mg model), mechanical and software over/underload protection, low battery indicator, auto power off, auto tare, span calibration mass included in models with capacity up to 620 g NO MORE BROKEN SCALES! The excellent overload protection of the Scout balance consists of a weighing pan made of high-strength stainless steel and a pan support made of impact-resistant plastic. The system allows the balance to safely support loads up to 10 times its rated capacity, withstanding use in even the most demanding educational environments. In addition, the integrated transport lock protects the load cell from damage during transport, stacking and storage.

The LTF 85 chest freezer will store your samples under optimal conditions even when opening the free (more)zer several times throughout the day. The single compressor technology provides reliable low temperature freezing and high temperature uniformity. Temperature range: -30°C to -60°C Max. ambient temperature: 25°C Capacity: 71 L Exterior dimensions (WxDxH): 552 x 648 x 850 mm Interior dimensions (WxDxH): 390 x 390 x 465 mm Weight: 53 kg

The Leica ST5020 stainer includes the ability to perform HE, PAP and special staining protocols simu (more)ltaneously. The Leica ST5020’s Reagent Management System allows consistent staining results, and the workstation can be customized with optional ovens, heating station, water stations and up to four loading and unloading stations in each drawer. Specimen slide throughput: depending on the program-structure Loading capacity: max.12 slide racks (with 12 different Programs) Slide rack capacity: 30 specimen slides Total number of stations: 40 (36 + 4 Oven) Total number of reagent stations: max. 34 Reagent container volume: 450 ml Number of wash stations: max. 5 and 1 DI-water Oven: 2 Oven chamber temperature: 40 °C to 70 °C Incubation time setting: 0 sec. up to 23 hours, 59 min., 59 sec. Load/unload stations: 1 each Permanent memory capacity: max. 50 Programs, up to 40 program steps each Integration: connection to Leica CV5030 Coverslipper (not included) Dimensions (WxDxH): 1060 x 750 x 540 mm Weight: 90 kg Clips not included. As-is, no warranty

This Carl Zeiss Microscope 1058-431 Light Channel & 1269-480 Switching Mirror was removed from a (more) university lab. They units are in good cosmetic condition but have not been tested.

The modern R-Lab software enables collecting, presenting and carrying out statistical analysis of me (more)asurements sent from RADWAG scales to a computer. The software operates with max 20 scales simultaneously. Data can be saved either manually or automatically. Collected information is presented on reports in a form of complex tables, and via graphs. Graph types: Measurement graph with statistics data Gaussian distribution function (probability distribution) and a histogram Stability graph – difference between successive measurements All in one graph The software makes it possible to generate a report for a particular series of measurements and it offers various filtering options, i.e. filtering by date, mass, unit, description or list of selected devices. R-Lab also presents reports from an ongoing session and a current day. Statistics created by the software include measurement quantity, minimum and maximum values, mean values, median, standard and mean deviation, variance, variance and deviation estimator and weighings sum. The data can be exported to PDF, HTML, MHT, RTF, XLS, XLSC, CSV, text and graphic files. The latest software version: 2018.4.11

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.