Tuttnauer 2840ELP Lab Line Benchtop Autoclave

Yamato SM-301 Sterilizer with Dryer 32L, 115V Operating Temperature Sterilization 105°C to 128°C Op (more)erating Temperature Drying 150°C to 180°C Internal Capacity 32L Features - Automatic operations from sterilization to drying carried out with an interactive key input system - Quick sample drying capability makes samples ready to use right after sterilization - Drying temperature can be set according to sample material, quantity, etc. - Timer range from 1~999 hours - Drain bottle water level can be quickly confirmed on the front panel level indicator - Drain valve located in front for easy access - Absence of protrusions in sterilization chamber makes insertion & removal of baskets, and other items quick and easy - Self-diagnostic functions make operation safer and error recovery quicker - Condensation collector neutralizes high temperature exhaust steam safely High performance, fully automatic 32L standard steam sterilization from start to finish with high pressure steam sterilization and drying steps. Automatic operations from sterilization to drying carried out with an interactive key input system. Quick sample drying capability makes samples ready to use right after sterilization. Drying temperature can be set according to sample material, quantity, etc. Timer range from 1~999 hours. Drain bottle water level can be quickly confirmed on the front panel level indicator. Drain valve located in front for easy access. Absence of protrusions in sterilization chamber makes insertion & removal of baskets, and other items quick and easy. Self-diagnostic functions make operation safer and error recovery quicker. Condensation collector neutralizes high temperature exhaust steam safely. Sterilizing temp. range 105 to 128°C. Drying temp range 150 to 180°C. INCLUDED: Yamato SM-301 Sterilizer with Dryer 32L, 115V includes: - 2 pcs. stainless steel mesh basket (⌀266 x D204 mm) - Drain board, drain bottle, condensation collection container with magnetic bracket - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Tuttnauer 2840ELCPVGP Lab Line Standing Autoclave Features - Take Advantage of Tuttnauer’s state-of- (more)the-art advanced control system with multi-color display - Intuitive Multi-color display for easier reading gives quick access to important information. Color is used to indicate the stage of the cycle - Safe Automatic pressure locking system. Door will not open when the chamber is over pressured - 316L grade high quality stainless steel chamber and door with electro-polish finish - Connect to a local network for use with RPCR Software for remote monitoring of up to 8 autoclaves - The 2840EL-D autoclave comes with 8 factory set cycle programs that cover the diverse processing needs of most laboratories and research centers - internal printer allows for the printing of Documents date, time, temperature and pressure Advanced multi-color control panel features intuitive method readouts in a multitude of languages. 316L grade high quality stainless steel chamber and door with electro-polish finish allows for long product life and ease of periodic cleaning Designed to save space on your laboratory workbench, the 2840EL is a front loading benchtop autoclave that provides high quality, repeatable performance and accountability for a wide range of applications used in modern laboratories. The 2840EL autoclave comes with 8 factory set cycle programs that cover the processing needs of most laboratories and research centers. This unit features fast cooling (up to 75%) in which water circulation is done through cooling pipes that cools the chamber. Additionally the complete drying feature utilizes steam from the generator in combination with vacuum for complete drying. This model features a printer. INCLUDED: The Tuttnauer 2840ELCPVGP Lab Line Standing Autoclave includes: - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul Volume Range 20-200ul Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 0.60/0.80/1.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Boekel Scientific 25515016 Cement Autoclave The Cement Autoclave consists of a welded ASME certified (more) steel cylinder with a bolted cover mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing. The unit is designed to handle pressure in the 60-350 psi (0.4 -2.4 MPa) range and consists of steam vessel, pressure regulator, pressure gauge (0-600psi), air vent valve, power switches, and a safety pop valve set at 350 psi. All components are pressure tested and designed to meet the highest safety standards. The autoclave consists of a welded steel cylinder with bolted cover, mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing. The steel cylinder is fitted with a high temperature gasket and a heavy cover held in place by 16 cap screws bearing upon washers. A T-Handle wrench supplied with the autoclave may be used to tighten the nuts gradually and uniformly to make a leak-proof assembly. The cylinder assembly is designed for a safe working pressure of 525 PSIG, or one and one-half the maximum working pressure. A safety valve set to release at 350 PSIG is provided for protection and modification is not recommended for safe operation. A dial pressure gage indicates the steam pressure in PSIG. Temperature readings are taken with a No. NP22507 thermometer ASTM #2F, which is placed in the thermometer well provided in the cylinder cover. An air-vent valve allows the escape of entrapped air during the early part of the heating period and releases any steam pressure remaining at the end of the cooling period. The autoclave is heated by two electric heaters attached to the cylinder. The heating unit is controlled from a switch panel on the control box. The control box houses the pressureregulator. A main toggle switch controls the entire electrical circuit including the automatic regulator. Separate on-off toggle switches, in series with pilot lights, control the current to the two heating elements. Switch functions are indicated on the switch panel.INCLUDED: The Boekel Scientific 25515016 Cement Autoclave includes: - Wrench, Thermometer, and 5 Gaskets - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BactiZapper Tilt, Microsterilizer with Adjustable Tilt The BactiZapper™ TILT Series utiliz (more)es the same well-proven technology of our original Bacti-Zapper Classic, but with a unique, adjustable head angle that allows for more convenient sterilization. When loosened, the adjustment knob can be shifted upward or downward, resulting in a tilt angle range of 55°C. INCLUDED: The Benchmark BactiZapper Tilt, Microsterilizer with Adjustable Tilt includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

OMNI GLH-220 homogenizer. Motor 700 watts with variable  speed control from 5,000 to 28,000 rpm. It  (more)has a processing range of 0.20 mL to 10 liters. Includes base stand. Generator probes are not included but can be ordered independently. Compatible with 5, 7, 10, 20, 32 and 35 mm diameter stainless steel generator probes (see pictures on the left to find the model that best suits your needs). The OMNI GLH-220 Homogenizer is a high-power device with a 700-watt motor and variable speed control from 5,000 to 28,000 rpm. which allows obtaining precise and efficient results in the homogenization of samples This homogenizer offers a wide processing range, from 0.20 ml to 10 liters, making it suitable for a variety of applications. In addition, it has a compact and ergonomic design that makes it easy to use and manipulate. Whether for sample preparation in research laboratories or industrial applications, the OMNI GLH-220 homogenizer is a reliable and versatile choice.

The HRP 5Y.KO series of mass comparators enables calibrating mass standards and weights in accordanc (more)e with OIML Recommendation (R-111) for class F2 and lower classes. Comparators are used to ensure consistency in mass measurements as well as to verify weights according to legal metrology requirements. RADWAG mass comparators have been recognized by calibration laboratories in many countries. The HRP 5Y.KO mass comparators consist of two elements: a professional weighing platform (modern design of an electromagnetic mechanism in a hermetic steel casing) and 5Y terminal. The weighing platform is made of steel and features marks facilitating centric loading of mass standards. The comparator can be equipped with a self-centring weighing pan (extra charge), which significantly minimises the influence of eccentricity during measurements. The self-centring weighing pan eliminates the error of placing the weight "out of pan centre". This solution also enables calibrating weights of different shapes and dimensions without the need to set the positioners for central loading of the mass standard each time. The comparator has a user-friendly menu. Data security and work results archiving are ensured by RADWAG terminal software.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Eppendorf 14 x 5ml Adapters, Cat. # 022637509 Eppendorf 14 x 5ml Adapters, Cat. # 022637509 for A-4- (more)44 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 4 x 15ml Adapters, Cat. # 022637606 are designed to be used with an Eppendorf 5804/R or 5810/R Centrifuge. INCLUDED: The Eppendorf 14 x 5ml Adapters, Cat. # 022637509 includes: - Full 6 Month Parts and Labor Warranty

Measurement Modes: pH, mV, relative mV (RmV), ORP or ion concentration (ISE) with temperature Probe  (more)Type: pH electrode, ORP electrode, ion selective electrode (ISE), reference half-cell electrode, ATC temperature probe Range (pH): -2.000 to 20.000 Accuracy (pH): ±0.002 Resolution (pH): 0.1/0.01/0.001 Calibration Points (pH): 1 to 5 Range (ISE): 0.0001 to 19900 with selectable units of ppm, Molar, mg/L, %, ppb or none Accuracy (ISE): ±0.2 mV or ±0.05% of reading whichever is greater Resolution (ISE): 0.0001 minimum, 1 to 3 significant digits (user selectable) Calibration Points (ISE): 1 to 5 Advanced ISE Functions: Segmented (point-to-point) slope, non-linear selectable auto-blank, low concentration range stabilit Range (mV): ±2000.0 mV Range (Relative mV): ±2000.0 mV Accuracy (mV): ±0.2 mV or ±0.05% of reading whichever is greater Resolution (mV): 0.1mV Range (ORP): ±2000.0 mV Temperature Range: -5.0°C to +105.0°C Temperature Accuracy: ±0.1°C Temperature Resolution: 0.1°C Alarm Output: High/low limit alarm, calibration due alarm Calibration: pH with calibration editing option, ion concentration (ISE) with calibration editing option, relative Calibration Points: 1 point relative mV (RmV) mode, 1 point ORP mode Log Function Type: Automatic data logging with Auto-Read and Timed measure modes; manual data logging Dimensions (LxWxH): 240 x 100 x 65 mm Weight: 0.5 kg Including new Thermo Orion calcium electrode for measuring calcium in aqueous solutions.