Systec VX-55 Autoclave

This Priorclave PS/QCS/EH150 Laboratory Autoclave was removed from a university lab where it was sur (more)plus to requirements. The unit has been stripped for parts. Useful parts remaining are 2 x output boards, power supply and heaters. It is sold for spares/repairs.

Astell AMA260BT Autoclave Lab This item was removed from a university where it was surplus to requir (more)ement. It is in good cosmetic condition but does not power on, therefore we are unable to conduct further testing, and it is listed as Spares/Repair. This item was manual opened to photograph the interior, there is currently no plug fitted. The previous client has confirmed that it is not in working order. Model- AMA260BTS/N- CLBN52652

Rodwell Ensign 125 Autoclave This item was removed from a university lab where it was surplus to req (more)uirements. The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.The item is due for a service, and no further testing was conducted. The previous client has stated it was in working order prior to removal. Specifications:- Model: Ensign 125 - Serial No.: 1861 - M24 Controller

DW Scientific AES Chemunex Masterclave 09 Benchtop Autoclave This was removed from a university lab (more) where it was surplus to requirements. The unit powers up but has not been tested further at our facility. It is sin good cosmetic condition with minor marks.

Benchmark Tall Micro Bead Sterilizer w/ Glass Beads Benchmark’s Micro Bead Sterilizer is ideal for t (more)he sterilization of small research tools (forceps, scissors, etc.). When the chamber is filled with the included glass beads, high temperatures (up to 300C) can be used to eliminate the presence of bacteria, spores and other microorganisms. Chamber temperature can be viewed on the large LED control panel and conveniently adjusted with the control knob. The outer casing of the unit stays cool to the touch, even when the sterilizer is used all day. The supplied safety cover can be placed over the opening to conserve energy and reduce the heating/ramping rate. The Micro Bead Sterilizer does not use gas, flame or chemicals and is safe for use in hoods. With adjustable temperature, the application range of the sterilizer can also be exanded into incubations and the decontamination of plastic objects/tools. This product is designed for RESEARCH USE ONLY. Not intended for clinical use. INCLUDED: The Benchmark Tall Micro Bead Sterilizer w/ Glass Beads includes: - Glass Beads, 300g - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr) This item was removed from a univers (more)ity lab where it was surplus to requirements. The burner is in good cosmetic condition. However, the burner control screen has come apart from the control panel and is possibly broken. No testing has been carried out. Due to the inability of testing and damaged control screen, this item is listed as Spares/Repair. Specifications:- Model: LPN3/2051 - Serial No.: 01333 - Manufactured: 11.09.15 - Output: 2051 KW/hr (7.0 MBtu/hr) Includes:- Dungs Gas Train Valve: FRS 5065 gas regulator, VPS 504 leak detector, GF 40065/3 filter - Autoflame Combustion Management System: - Part Nos.: MM10005, MM10004 - Serial Nos.: 20368, 051771 - TEC Fan Motor: - 5.5KW 415 volt - Type: 5.523TECAB35-IE3 - T3A 13251-2 - Gas Inlet Pipe: 2.5"

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

The UMA 2.5Y.F automatic weighing system has been designed to test mass changes of filters made of  (more)quartz glass fibre, glass fibre, teflon and teflon covered with glass fibre. Mass measurement is carried out with readability of 1 μg or 0.1 μg. The weighing system enables conditioning filters in accordance with PN-EN 14907 and PN-EN 12341 standards. Effective and Excellent Measurement The UMA 2.5Y.F automatic weighing system is a first-class solution for professional mass measurement. Dynamic control and correction of mass indications both ensure fast and stable weighing regardless of the weighed filter type. The UMA weighing systems, due to the elimination of the human factor, temperature changes and air drafts, guarantee excellent measurement repeatability. Effective Weighing Analysis Full automation of the weighing cycle, thanks to the elimination of the ‚human factor’, is a guarantee of measurement repeatability impossible to be obtained in case of manual weighing. Remote programming of measurement processes significantly increases operation efficiency. Dedicated Software The RMCS Filters software allows to manage time and comparison test plans of each filter or filter series. Summary reports and report components are defined by the system administrator. Metrological Control Periodically, correctness of weighing system operation is verified via a certified mass standard or a reference filter. Compact Design The UMA 2.5Y.F automatic weighing system can be easily adapted to any laboratory conditions. The device size facilitates its placing on the anti-vibration table of standard dimensions. Ambient Conditions Module The ambient conditions module is housed inside the bottom part of the weighing system. This results with a laminar air flow that does not disturb the ongoing filter mass measurement. The range of temperature and humidity changes is automatically forced in accordance with the values programmed via device terminal.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Hermle Z287-A Compact Universal Centrifuge The Z287-A exceeds the limitations set forth by tradition (more)al microcentrifuges which are restricted solely to fixed angle rotors for microtubes. Instead, this compact, next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50ml. We’ve designed this centrifuge to be our most compact and economical. A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research. Along with a broad range of available rotor options, the Z287-A introduces a convenient status indicator. Users can easily view the current state of the centrifuge from across the room. The LED illuminates to signify if the rotor is spinning, the run is completed or the centrifuge is idle in standby mode. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the EZ-Scroll touch wheel front panel can adjust accel/decel rates, and change the end of run alarm tone. Additionally this feature prevents debris buildup, leakage, and can be operated with gloves on. The Z287-A is a truly powerful and versatile centrifuge perfect for any research laboratory. INCLUDED: The Hermle Z287-A Compact Universal Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty