Systec VE-100 Vertical Autoclave

The Systec V-series of top-loading vertical autoclaves is distinguished by its small footprint and h (more)igh chamber capacity. Result: optimal loading capacity with most standard media bottles and Erlenmeyer flasks. Features: Integrated, separate steam generator Housing, support frame and pressure vessel made of corrosion-resistant stainless steel Temperature and pressure range 140 °C, 4 bar absolute pressure LCD display and fully automatic microprocessor control Up to 25 sterilization programs Code-secured access rights for changing parameters and further safety-relevant intervention Internal memory for storing up to 500 sterilization cycles Timer for starting programs Autofill: automatic demineralized water feed for steam generation Flexible PT-100 temperature sensor Additional temperature sensor in condense exhaust Temperature holding function for liquids after program finish Special program for Durham tubes Calculation of F0 value Special program for waste sterilization with pulsed heat-up for more efficient air exhaust Water-cooled steam exhaust, thermostatically controlled Programmable automatic door-opening on completion of program Quick cooling for efficient and safe cooling of liquids Vacuum system for validatable sterilization of solids and waste materials in disposal bags Chamber dimensions (ØxD): 344 x 600 mm Nominal chamber capacity: 55 L Dimensions (HxWxD): 950 x 500 x 680 mm Weight: 115 kg

Astell AMA260BT Autoclave Lab This item was removed from a university where it was surplus to requir (more)ement. It is in good cosmetic condition but does not power on, therefore we are unable to conduct further testing, and it is listed as Spares/Repair. This item was manual opened to photograph the interior, there is currently no plug fitted. The previous client has confirmed that it is not in working order. Model- AMA260BTS/N- CLBN52652

Tuttnauer 2840ELCPVGP Lab Line Autoclave Features - Take Advantage of Tuttnauer’s state-of-the-art a (more)dvanced control system with multi-color display - Intuitive Multi-color display for easier reading gives quick access to important information. Color is used to indicate the stage of the cycle - Safe Automatic pressure locking system. Door will not open when the chamber is over pressured - 316L grade high quality stainless steel chamber and door with electro-polish finish - Connect to a local network for use with RPCR Software for remote monitoring of up to 8 autoclaves - The 2840EL-D autoclave comes with 8 factory set cycle programs that cover the diverse processing needs of most laboratories and research centers - internal printer allows for the printing of Documents date, time, temperature and pressure Advanced multi-color control panel features intuitive method readouts in a multitude of languages. 316L grade high quality stainless steel chamber and door with electro-polish finish allows for long product life and ease of periodic cleaning Designed to save space on your laboratory workbench, the 2840EL is a front loading benchtop autoclave that provides high quality, repeatable performance and accountability for a wide range of applications used in modern laboratories. The 2840EL autoclave comes with 8 factory set cycle programs that cover the processing needs of most laboratories and research centers. This unit features fast cooling (up to 75%) in which water circulation is done through cooling pipes that cools the chamber. Additionally the complete drying feature utilizes steam from the generator in combination with vacuum for complete drying. This model features a printer. INCLUDED: The Tuttnauer 2840ELCPVGP Lab Line Autoclave includes: - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul Volume Range 100-1000ul Adjustable or Fixed (more) Volume Adjustable Volume Accuracy (±%) 0.60/0.70/2.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HVA-85 Economical Floor-Standing Autoclave with Cooling Fan, 85L, 208/220/240V Cham (more)ber Volume 85L Sterilization Temperature Range 105C to 135C Chamber Dimensions 16.5" x 24.2" (42.0 cm x 61.5 cm) Features - Space-saving design with lid opening upward. - Standard built-in cooling fan for faster post- sterilization cooling. - Dual lid safety interlock prevents lid opening when a cycle is in progress, the chamber is pressurized, or the temperature exceeds 97°C. - Agar sterilization mode sterilizes agar, and then automatically keeps it warm to prevent it from solidifying. - One-touch lever to easily open and close chamber lid. - Agar melting mode for rapidly melting agar and then automatically maintaining it at liquid temperature, or for a hot and faster start-up. - Door-closure sensor prevents a cycle from starting unless the door is closed properly. - In-process display shows the status and the progress of sterilization cycle. The HVA-85 and HVA-110 models incorporate a 85-liter and a 110-liter chamber, respectively. They are self-contained, portable floor models mounted on caster wheels. Equipped with a chamber 16.5” in diameter, they can accommodate significantly larger loads than 50-liter models. They are ideal for the sterilization of fermenters, media, wastes, and laboratory glassware.INCLUDED: The Hirayama HICLAVE HVA-85 Economical Floor-Standing Autoclave with Cooling Fan, 85L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V Chamber Volume (more) 76L Sterilization Temperature Range 105ºC to 135ºC Chamber Dimensions 14.3 x 28.7 in(36.4 x 73.0 cm) Features - Automatic Lid Opening and Closing Button replaces a foot pedal. - Safety Interlock senses pressure and temperature and prevents lid from opening during a cycle, when the chamber is pressurized, and when the high temperature can cause boil over. - Programmable Auto-Start for running a cycle from 1 to 99 hours later and time for air removal before sterilization. - Large (15 liters) / Efficient Steam Condenser ensures no steam exhausts into the lab. The HG-113 and HG-133 incorporate a radiator for this. - Over-Flow Lamp indicates that the drain bottle is full and ready to be emptied. - Built-in Cooling Fan for faster post-sterilization cooling and shorter completion time. - Selectable Rate of steam venting after sterilization. - Twelve Programs Cycles can be stored. - Large Control and Display Panel improves functionality and shows the progress of the sterilization cycle. The Hirayama HICLAVE HG-80 is an advanced 85L floor-standing autoclave designed for efficient and safe sterilization. It features an automatic lid opening button to replace the conventional foot pedal and an automatic lid closing button for convenience. Its safety interlock prevents the lid from opening during cycles, ensuring safety when the chamber is pressurized or at high temperatures. The programmable auto-start can delay the start of a cycle by 1 to 99 hours. A large and efficient 15-liter steam condenser prevents steam from exhausting into the lab, complemented by a built-in cooling fan for rapid post-sterilization cooling. Users can select the rate of steam venting post-sterilization and program the air removal time before sterilization begins. Up to twelve program cycles can be stored for easy recall.The HG-80 boasts a large control and display panel, enhancing functionality and cycle progress visibility. Specifications include a chamber size of 76 liters (14.3" x 28.7"), a temperature range of 105°C to 135°C, a sterilization timer from 1 to 300 minutes, and an agar warming range maintainable from 45°C to 60°C for up to 24 hours to prevent coagulation. Additional features include a programmable air removal timer, selectable steam venting rates, and customizable temperature settings for lid interlock release for increased safety and flexibility. The unit is equipped with comprehensive safety features, including a circuit breaker with GFCI, low-water power cut-off, over-temp power cut-off, over-pressure power cut-off, safety valve, and a sensor for improper lid closing. The autoclave comes with a 15-liter water tank for the steam condenser and a 2-liter drain water bottle. It operates on 208/220/240V, 50/60 Hz, single-phase power, with a consumption of 3.8 kW, and ships at a weight of 255 lb (116 kg).INCLUDED: The Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for 1 of 2 Cole Palmer MasterFlex L/S 7554-95 Peristaltic Pump with a Masterflex Eas (more)y-Load 3 pump head . The unit is in full working condition and is ready for immidate realese. The Cole-Parmer MasterFlex L/S 7554-95 Peristaltic Pump is a versatile and reliable solution for accurate fluid transfer in laboratory, pharmaceutical, and industrial environments. Designed to handle a wide range of flow rates and fluid viscosities, this peristaltic pump offers precision, ease of use, and durability. Key Features: Flow Rate: Delivers flow rates from 0.6 to 3400 mL/min, adjustable based on the tubing size used. Variable Speed Control: The pump operates at speeds between 6 and 600 RPM, allowing precise control of flow. Reversible Pumping: Enables bi-directional flow for easy priming, purging, and efficient fluid transfer. Digital Display: Provides a clear, easy-to-read display showing speed, direction, and operational status for precise monitoring. Easy Maintenance: Tool-free tubing changes and a low-maintenance design for efficient operation. Compatibility: Works with a variety of MasterFlex L/S tubing, ensuring adaptability for different fluid handling needs. Durable Construction: Engineered for reliable, long-term use, with corrosion-resistant materials to withstand demanding applications. Specifications: Flow Rate Range: 0.6 to 3400 mL/min Speed Range: 6 to 600 RPM Power Requirements: 90-260 VAC, 50/60 Hz Operating Temperature: 0 to 40°C (32 to 104°F) Dimensions: 8.6" H x 9.4" W x 11.1" D (21.8 cm x 23.9 cm x 28.2 cm) Weight: 15 lbs (6.8 kg) The Masterflex Easy-Load 3 pump head is designed for user-friendly operation and fast tubing changes. Key features include: Automatic Retention Mechanism: The spring-loaded occlusion lever opens the occlusion bed and retracts the tubing retainers, allowing tubing to be easily loaded and unloaded. Tubing Range: Suitable for use with Masterflex L/S Precision tubing, with a flow range of 0.001 to 2900 mL/min depending on tubing size. Stackability: Up to 4 Easy-Load 3 pump heads can be stacked on one compatible pump drive, making it an efficient solution for multi-channel applications. Easy Integration: Same-side tubing entry/exit permits easy integration into space-limited applications, with the option to mount and operate the pump head in any of four positions (depending on the drive).

Thermo Neslab CC-100 II Immersion Cooler With Thermo Electron Cryotrol This was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers up and is in good working order (digital thermometer used for testing, not included). It is in good cosmetic condition with minor marks.

This item has just arrived in our stock. Please enquire for further details.

IKA R 1385 Propeller 3 - Bladed Stirrer Flow-efficient design. For drawing the material to be mixed (more) from the bottom to the top. Minimum shearing forces. Used at medium to high speeds.Stirrer Ø: 140 mmShaft Ø: 10 mmShaft length: 550 mm INCLUDED: The IKA R 1385 Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote