Wentworth Laboratories Model 701 Vibration Isolation Table Lab

INTEGRA FIREBOY eco safety Bunsen burner + pedal Mobile Bunsen burner with two adjustment knobs for  (more)gas and air, Gas type: Natural gas, butane, propane L×P×H: 100×150×60 mm Weight: 1.3 kg Traces of green oxidation on the copper burner

Under-bench cabinet depth 45cm - Length 102cm Laboratory cabinet Length: 102cm Depth: 45cm Height: 6 (more)7cm In melamine 2 doors On casters (hidden by the finishing profile) Average condition of the cabinet and worn casters

COMBISTORAGE 4 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Completely made of electroga (more)lvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Made in two or three compartments with smooth painted or glass doors - Cabinet body in galvanized steel Characteristics of the ACID COMPARTMENT: - Completely made of electrogalvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Features of the BASE COMPARTMENT: - Two retention shelves made of stainless steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Characteristics of the COMPARTMENT FOR "TOXIC SUBSTANCES": - Two retention shelves made of painted steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Supplied: - Acids: 2 shelves in plasticized steel - Bases: 2 shelves in stainless steel - Toxic substances: 2 shelves in painted steel - Flammable: 3 shelves and 1 retention tank with painted steel grid (max load of 60 Kg evenly distributed) Optional: - Shelves - Trays - Timer - Visual and acoustic alarm system - Ventilation - Molecular aspirator - Activated carbon filter

COMBISTORAGE UNDERBENCH Modular and certified. Optimize the space in your laboratory thanks to the C (more)OMBISTORAGE under hoods. Replace your furniture in the laboratory with useful safety cabinets for acids, bases and flammables. Different widths and heights to perfectly fit your laboratory. COMBISTORAGE UNDERBENCH safety cabinets can be combined on bases of different lengths. (It allows to have a single base for composition: ACIDS + BASES + FLAMMABLES).  Possibility of aspiration. - Construction in electro-galvanized steel sheet with thicknesses from 1 to 1.5 mm cold bent - gray - External finish in acid-resistant epoxy resin and passage in a thermal tunnel at 200°C - Panels made of HPL (High Pressure Laminate) with high resistance to chemical and aggressive vapors - Structure that provides for replacements with spare parts - redisposition for ventilation with 100Ø mm flange for external connection or filtration ventilation system - Equipped with grounding - Adjustable feet - Key lock - Shelves made of plasticized steel or stainless steel with adjustable height - Model with chest of drawers made of plasticized steel - Securing the shelves with pegs - Signage with pictograms according to ISO 3864 - EN61010 certification - EN16121 BV certification HOW TO CHOOSE YOUR COMBISTORAGE IN 3 SIMPLE STEPS? 1 - Measure the space you have available in your laboratory: under the hood, instead of a simple piece of furniture, in a space you do not use. 2 - Think about if you will need a particular support base. 3 - Choose the cabinet model for acid chemicals, bases or for flammable products. THE VERSATILITY OF COMBISTORAGE MODELS - Left, right or drawer door - 13 widths available - Support bases at 70 mm - All models available in 620 or 720mm heights DO YOU NEED HELP? Do not hesitate to contact us, our CHEMISAFE product expert will help you choose the model that best suits your needs or design the perfect set for your laboratory. CONTACTS US ➞

CS 60 BASIC PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in HD PVC - Extracto (more)r cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 3 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

Particle size measurement instruments typically employ deionized or even untreated water as a suspen (more)sion medium for particle dispersion during analysis. Usually, this water contains undesirable levels of dissolved gases, most often those commonly present in the atmosphere. During analysis, these gases can come out of solution, forming minute bubbles that can have important effects on the analytical results. Regardless of the relative size of the bubbles, their presence distorts the reported distribution of sizes; it also degrades the repeatability of analyses. The more powerful the analyzer, the more pronounced these effects can be. When using a highly sensitive instrument such as the Micromeritics Saturn DigiSizer, removal of the dissolved gases (that subsequently lead to bubble formation) is therefore extremely desirable for obtaining the most accurate particle size data possible. The Micromeritics AquaPrep is a highly-effective system for freeing water of dissolved gases for use with the Saturn DigiSizer. The AquaPrep recirculates water through a hydrophobic capsule consisting of many thin-walled capillaries. A vacuum pump provides low pressure on the outside of the capillaries, causing a diffusion of dissolved air from the water through the capillary walls and into the vacuum pump. The air removed from the water is subsequently exhausted through a small tube at the front of the instrument, which is connected to a bubbler-type apparatus for performance monitoring. During typical operation, the AquaPrep can prepare approximately 5 liters of water for analysis in less than 2 hours. Because air bubbles scatter light as do particles, the AquaPrep enhances even further the high-accuracy analysis of small particles. Its compact, rugged, and reliable design make it ideal for use in a wide variety of aqueous particlesizing applications.

Temperature range: -10°C to 200°C Temperature Stability: 0.01°C Pump type: Force Pump, Suction Pump  (more)Flow rate: 20L/min Max pressure: 475 mbar Cooling Capacity: 240w Capacity: 6 L Dimensions (LxWxH): 414 x 220 x 632 mm Interior dimensions (LxWxH): 124 x 137 x 150 mm Weight: 27.5 kg

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-27384 Box of Small Mixed Glassware ITEM-30071 Mixed lab glassware ITEM-30073 Mixed lab glassITEM-30072 Mixed nutritional science toolsITEM-30082 Miscellaneous lab toolsITEM-30076 IBM Pro PrinterITEM-30067 DJM. Cryo Research LCO2/LN2ITEM-30080 Isometric transducerITEM-30084 Sony Video Graphic Printer ITEM-30069 Glass tubes ITEM-30070 Glass tubes (bagged) ITEM-30059 50ml vol flasks ITEM-30065 Fisher Scientific Power 608ITEM-30079 500 VA isolating transformer ITEM-30056 Hoefer DC Power Supply PS 3000 ITEM-26105 Magnetic Stirrer Hotplate ITEM-30068 Mixed lab glassITEM-30050 Lab glasswareITEM-30049 Seperating funnelsITEM-30066 Bio Rad Model 200/2.0 Power SupplyITEM-30053 Grant BT1-E ITEM-30055 Microcomputer Electrophoresis Power Supply ITEM-30054 Instech Automated Blood Sampler ITEM-30083 Polar Vantage Heart Rate Monitor ITEM-30074 Mixed glass filters ITEM-30048 Unknown Plastic Item ITEM-30062 Sample Holder RackITEM-30063 Sample Holder Rack ITEM-30064 Sample Holder Rack ITEM-30061 ZipPette 30mlITEM-30060 Amersham Bioscience columnITEM-30057 Miscellaneous wires/cables ITEM-30058 Omni TH220P ITEM-30052 Amersham Pharmacia Biotech Column C 16/40 ITEM-30051 Waring Commercial Blender ITEM-30075 Wacom Intuos Pen TabletITEM-30045 MWG AG Biotech Primus 96+ ITEM-30047 Centrifuge Rotors ITEM-30046 Listing PaperITEM-28319 Micro Techniques magnetic apparatus ITEM-27661 Magnifying Glass ITEM-25679 Varian Oil Mist Eliminator ITEM-27663 Norgren Pressure GaugeITEM-25694 2x Boxes of Columbia INT Ribbon Type BO OMEF 9 ITEM-25705 Denley Aluminium Tray ITEM-27381 Tube of glassware ITEM-28322 VT Video Monitor ITEM-28301 FisherBrand Shaker Flask Clamps, mixed sizes ITEM-26085 Photochemical Reactor ITEM-26091 Freezer rackingITEM-26092 DNA Engine Tetrad ITEM-26065 Sony AC Adaptor/Charger AC0V700ITEM-26024 Kramer Tools VP-211DS Automatic VGA/Audio SwitcherITEM-26016 iOmega Zip 250ITEM-30041 Unbranded Microscope ITEM-30031 Philip Harris MicroscopeITEM-30043 Unbranded Microscope ITEM-30034 Harding Scientific Microscope ITEM-28324 Seca Scale ITEM-28306 Conical Flasks ITEM-28325 Hybaid Microgel-PSU equipment ITEM-28323 Miscellaneous toolsITEM-28307 Leading Edge® PC Laptop & PSU ITEM-30032 Harding Scientific Microscope

Beckman Coulter 6015 MET ONE 6000P Remote Airborne Particle Counter Lab This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Also included are the following: Hammond Manufacturing metal Lockable case with vent holesP/N - SP2001942ST161608SS Meissner Filtration ProductsCF2SM0.2-41B1S/N - Z8803254 Phoenix ContactKGG-MC 1,5/8 UK, Euro & USA Power Supply Cables.

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.

Boekel Scientific 137100 Pipet Washer/Dryer Combination, 115VThe BoekelScientific 137100 Pipet Washe (more)r/Dryer Combination combines washing, rinsing, anddrying functions in a single unit. It requires less counter space and costsless than conventional separate devices. No need to move wet pipets from washerto dryer. Made from 0.018 stainless steel, type 302. Drying time is one hour.Pilot light indicates heater function. For maximum pipet length: 37.5cm(143/4"). INCLUDED: The Boekel Scientific 137100 Pipet Washer/Dryer Combination, 115V includes: - Stainless Steel Pipette Holder - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty