Thermo Scientific REL404V High-Performance Laboratory Refrigerator Kühlschrank +1...+8°C

- Storage capacity (cryobox): 690 - Storage capacity (2ml vials): 69,000 - 350 ml plasma bags: 600 - (more) Preset temperature: -82°C - Cold/hot temperature alarm limit: -87°C / -77°C Ultra low freezers, or deep freezers, are devices intended for storing blood and plasma components, human cells, tissues and other laboratory samples at temperatures as low as -86°C. "U" models reflect the highest and most uncompromising requirements with state-of-the-art technology. The cooling system is optimally designed to allow very low consumption and little heat production. Medical device in accordance with MDR (EU) 2017/745, Class IIa directive THE CONTROL PANEL Extremely easy control of all parameters: - 7" color touchscreen display at eye level - Locking mechanism protected by card reader and password - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - B Universal connected software for remote monitoring, recording and long-term archiving - USB port for easy data export - Alarm memory and history on the monitor with indication of the type - Ethernet interface for data management, via B software, to a PC - Backup battery (duration of at least 48 hours) - Optionally, the possibility of passing data to a db through the network. - Monitor indication of: time, input Volt, login status (user level) SAFETY AND TRANQUILITY Accurate temperature and 24-hour storage: The safety standards developed by B Medical Systems define unique technical features, ensuring the safe storage of preparations and setting the highest safety standards for the user. - Controlled air cooling system for a uniform and stable temperature distribution - Automatic defrost while maintaining a stable temperature - Rapid temperature recovery even after numerous door openings - Safety thermostat to prevent freezing - Long range in case of power failure - Audible and visual alarms with remote alert via SMS or email - °B Connected universal software for remote archive, report (according to FDA 21 CFR Part 1) More than certified tools - European regulation on medical devices: MDR (EU) 2017/745, Class IIa (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - EMC Directive: 2014/30 / EU (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - Low voltage directive: 2014/35 / UE (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - FDA-Medical Device Regulations: 21CFR Part 864.9700, Class II (models: 115-127 V - 60 Hz and 220 V - 60 Hz) - CCSAus certified: Yes (models: 115-127V - 60Hz and 220V - 60Hz) - GMP - Clean room classification: ISO class 6 / EC GMP B ISO class 5 / EC GMP A The 'PREMIUM' line provides you with the most advanced tool you can find. The maximum of technology that you will be able to receive in your laboratory or research center, as well as for the pharmacy and hospital. These models will not serve you best today, but for decades they will remain advanced and modern tools. Tens of years of experience in the design, construction and use, in all conditions, have allowed B Medical Systems to be able to create some of the best instruments on the market. By purchasing this instrument manufactured in Luxembourg, you will save energy each day on the time used for your applications, without risking losing your precious samples. Optimized design for energy efficiency - Often polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum Improved structure and built for everlasting durability - Anti-corrosion structure guaranteed for life - Constructed by rotational molding, in high quality polypropylene for better insulation and strength - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times - Double internal door RTMD | DATI SEMPRE ONLINE WANT EVEN MORE CONTROL? As an option, you can connect your B-Medical-Systems devices to the °B CONNECTED online software. Through this software, via PC or smartphone, you will be able to have a complete overview and management of all your B-Medical-Systems instruments. - Real-time data: temperature, set point, component status, compressor data - All recorded data: alarms, temperatures, exceptional events that occurred during refrigeration - Display and settings of all parameters - Graphic display of temperature curves - Easy graphics to monitor all the devices you own - Incredibly interactive - Customizable data printing - Easy setting of specific alarms, via email or SMS alerts - Data export for third party software - Important advantage in terms of costs compared to a traditional circular paper recorder FEATURES OF VALUE EFFICIENCY - High efficiency natural gas compliant with US SNAP and F-GAS - High performance and low consumption compressor - One-piece printed polypropylene chassis guaranteed for life against corrosion and fully recyclable - Superior insulation - Ergonomic handle with special valve to open the instrument with minimum effort. CONVENIENCE AND COMFORT - Easy access to parameters via 7 'touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for better cleaning - Low noise - Low heat emission - Modular interior equipment - Easy access to the internal drawers-trays - Highest quality stainless steel - Minimal ice formation to allow easy defrosting MULTIFUNCTION ELECTRONICS - Maximum reliability - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal '° B Software' connected for remote monitoring, recording and long-term archiving - Electronic temperature recorder - USB port for easy export of recorded data - Data backup battery Versatile and modular - Full compatibility of internal modules and rails - no need to buy new racks, you can keep previously used racks in different U models - Cryo racks optional ... and much more. Download the data sheet for the data of each model, the standard and optional accessories.

Select Incubat reconditioned incubator. Volume 36 L. Ventilation by natural convection. Adjustable  (more)from ambient temperature +5 ºC up to 80 ºC. Regulation and digital reading of temperature and time of operation. Stability ± 0.1 ºC. Uniformity ± 0.5% to temperature of work. Error from setpoint ± 2 % at working temperature. Resolution 0.1 ºC. Interior door of tempered glass. It is supplied with two trays and four guides. They do not have RS232 output .Thermostat adjustable.

ITV IQ 85C flacked ice machine / flake. Ice production 88kg/24h. Capacity 20 kilos. Low energy consu (more)mption thanks to its high-efficiency evaporator without sealing joints or seals. Stainless steel spindle. IN-OUT front ventilation that allows built-in installation. Power indicator light, stop by safety element and full ice tank. Door steel inoxidable. STIF. Opening and cushioning patented by ITV. Electromechanical control system. Speeder. Clean button. EASI. 59x47x79 (DxWxH). 58 kilograms. Note: small defects on the front of the door that do not influence its operation. Visible in image 5 energy Features

Heli DW-86L58 upright ultra-low freezer. Temperature range from -40 ºC to -86 ºC. Capacity 58 L. Ult (more)ra-fast cooling to -80°C in less than 90 minutes. Thick foam insulation. Single compressor. Microcomputer control. Digital temperature display. Audible alarm functions. Password protection. Key lock. Double door. Stainless steel shelf and interior. Dimensions: exterior 640*665*1145 mm; interior 364*405*410 mm. User manual. The Heli DW-86L58 Ultra Low Temperature upright Freezer is a small but robust unit that combines a reliable cooling system together with a unique door sealing system (perfect fit system®).  As the -86°C freezer itself can be set accurately on the controller the most important temperature is products stability.  For this reason We only chooses the most reliable components available.  The reliable cooling compressors are used in a unique cascade system with very low compressor pressures and a completely sealed cooling system.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

This listing is for a Heidolph Polymax 1040 Wave Platform Shaker. The unit is in full working condi (more)tion and is ready for immidate realese. Elevate your laboratory's capabilities with the Heidolph Polymax 1040 Wave Platform Shaker, a versatile and reliable solution designed for a wide range of applications, including cell culture, mixing, and incubation. This medium-sized shaker is engineered to provide optimal performance while ensuring gentle and effective agitation for your samples. Key Features: Variable Tilt Angles: Choose between a 5° tilt angle for soft, gentle movements or a 10° tilt angle for more vigorous shaking, accommodating various vessel types such as culture plates, media bottles, and Erlenmeyer flasks. Adjustable Speed Control: Easily set and adjust the speed from 2 to 50 rpm using the intuitive analog control knob, making it ideal for delicate cell culture applications. Temperature Control Compatibility: Designed to work seamlessly with a modular incubator system, the Polymax 1040 supports variable temperature control up to 65 °C, allowing for precise incubation conditions. Technical Specifications: Maximum Load Capacity: 5 kg Shaking Type: Orbital rocking shaker Analog Timer: Set for unattended operation from 1 to 120 minutes, with an acoustic alarm signaling when the time is up. Benefits: Unmatched Versatility: The Polymax 1040 can handle a variety of vessels, giving you the flexibility to conduct multiple experiments without limitations. User-Friendly Operation: The straightforward analog controls and timer make it easy to set up and monitor your experiments, ensuring reliable results every time. Robust Design: With a shipping weight of 10 kg and a durable construction, this shaker is built to withstand the demands of everyday laboratory use. Choose the Heidolph Polymax 1040 Wave Platform Shaker for a dependable, high-performance shaking solution that meets the diverse needs of your laboratory. Experience enhanced efficiency and precision in your mixing and incubation processes today!

Beckman Coulter Bucket Covers for GH 3.8 Buckets, Cat. #: 360585The Beckman Coulter Bucket Covers, C (more)at. #: 360585, are designed for use with the Beckman Coulter GH 3.8 Swing Bucket Rotor and crafted from durable, high-impact plastic. Each cover incorporates an ethylene propylene O-ring that fits snugly onto a ledge inside the bucket, ensuring a secure seal. The covers feature built-in latches for easy attachment and secure closure. While these covers are not intended to contain aerosols potentially released from tube breakage, they are effective at retaining most liquids and broken tube particles. This capability significantly minimizes the need for centrifuge chamber cleaning and enhances safety by allowing for controlled access after incidents involving tube breakage. INCLUDED: The Beckman Coulter Bucket Covers for GH 3.8 Buckets, Cat. #: 360585 includes: - Set of 2 Bucket Covers - Full 6 Month Parts and Labor Warranty Beckman Coulter Bucket Covers for GH 3.8 Buckets, Cat. #: 360585Rotor CompatibilityBeckman Coulter GH 3.8 Swing Bucket Rotor

This model is particularly suitable for simple mixing tasks. In short-term operation mode, the shaki (more)ng motion is triggered by pressure on the test tube tray. This mode is suitable for mixing up solutions, for example. Persistent cell pellets can be dissolved gently but powerfully in continuous operation. With a speed of up to 2400 rpm and a shaking orbit of 5 mm, reliable and uniform distribution of solids, and homogenization of highly viscous media are guaranteed. Motion: vibrating Rotation speed range: 200 – 2400 rpm Operating Mode: automatic or continuous Orbit/Stroke: 5 mm

0

The power source of the brand Pharmacia type MultiDrive XL is designed for use in combination with e (more)lectrophoresis and isoelectric focusing (IEF). This power source can control and supply the three electrical parameters voltage, current and power. The duration of the run can be controlled by setting values for the following parameters: time, voltage and milliamperes per hour. In addition, the Pharmacia MultiDrive XL contains nine pre-programmed methods. Specifications Voltage: 3500V Current: 400mA Power: 150W Dimensions (WxDxH): 365 x 300 x 160 mm

A motor control console designed for controlling agitation systems in Applikon bioreactors. Designed (more) for use with Applikon P100 drive motors Knob adjustment of motor speed with three digit LCD readout Interchangeable local or remote control via rear RS232 port Speed Range: Approx 0 to 230 RPM