Thermo Scientific Heratherm IMPP400 Cooled Incubator

This listing is for a Grifols DG Therm IncubatorThe DG Therm is a digital incubator designed for eff (more)icient gel card processing. It can hold up to 24 DG Gel cards and 24 test tubes across two independent incubation zones. The on-screen display shows the remaining incubation time and temperature, and it features a programmable alarm and removable trash bin.

Laboratory incubator with orbital shaking 50 Liters LBX - NEW New Equipment Model INC-S Temperature  (more)range: Ambient temperature +5°C - 65°C Type of movement: orbital Orbital shakers: 20 mm Allowable capacity (support included): 10 kg Maximum shelf capacity for single specification (ml/pc): 100ml*16 / 250ml*10 / 500*6 Speed range: 30 - 300 rpm speed variation: ±1 rpm Timer: yes Timer (hour and minute setting): 1 - 9999 min Type of operation: timer mode and continuous mode Power: 800 W Internal chamber operating area: 455 x 380 x 290 mm Total volume of the internal chamber: 50 l External dimensions: (L x H x D): 560 x 390 x 320 mm Probe: Pt100 Voltage: 230 V Frequency: 50/60 Hz

Temperature range: 0 – 70°C Capacity: 151 L Temperature alarm for high/low value. Glass inner door 2 (more) shelves Dimensions (HxWxD): 1270 x 850 x 620 mm

Heraeus Heracell 150 Co2 Incubator Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition externally but the copper interior has tarnished.

Memmert IN110 Natural Convection Incubator 108L, 115V Temperature Range At least 5°C above ambient  (more)to +80°C Convection Type Natural Convection Chamber Volume 108 L Features - 108 L (3.8 cu.ft.) capacity for ample sample accommodation - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - High-resolution display with 0.1°C accuracy for both set point and actual temperature values - Adjustable parameters including temperature (Celsius/Fahrenheit), air flap position, program time, and daylight savings - SetpointWAIT function ensures process time begins only once the set temperature is reached - AtmoCONTROL software allows for data management and program organization via Ethernet - Inner glass door allows for easy sample monitoring without disrupting the internal environment - Autodiagnostic system and adjustable overtemperature monitor for enhanced safety The Memmert IN110 Natural Convection Incubator 108L, 115V is designed for precise and reliable sample incubation in low-temperature applications. With a spacious 108 L (3.8 cu.ft.) capacity, this unit accommodates a wide range of samples and ensures consistent temperature control from at least 5°C above ambient up to +80°C. The high-resolution display provides 0.1°C accuracy for both set points and actual values, allowing precise adjustments. Its adjustable parameters include temperature in Celsius or Fahrenheit, air flap position, and program timing, with a SetpointWAIT function that begins processing only once the set temperature is reached. Enhanced with AtmoCONTROL software for data management, a durable stainless steel interior, and an autodiagnostic system with overtemperature monitoring, this incubator combines efficiency, safety, and ease of use. INCLUDED: The Memmert IN110 Natural Convection Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Benchmark SureTemp Dual Convection 70L Incubator The new SureTemp Incubator series provides the high (more)est level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class. Each incubator is equipped with the SureCheck data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping. Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection” technology, allowing users to choose between mechanical convection mode or gravity convection mode. Mechanical convection incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperature. Gravity Convection eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature. The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.INCLUDED: The Benchmark SureTemp Dual Convection 70L Incubator includes: - SureTemp Data Logging Software - Internal Power Outlet - 2 Stainless Steel Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This Wentworth Laboratories Model 701 Vibration Isolation Table was removed from a university lab wh (more)ere it was surplus to requirements. The unit is in reasonable cosmetic condition with some marks and some light rusting. It has not been tested. Plate on top dimensions - 61 x 41cm

This Interlas Syncrotig 375 AC/DC Gas Tungsten-Arc/Shielded Metal Arc TIG Welder was removed from a  (more)university engineering lab where it was surplus to requirements. We haven't tested it at our facility further than powering it up but the lab said it was fully working prior to removal. It is a complete system. Actual unit dimensions - D58 W80 H143.5cm (comes on a trolley for mobility)27 x 58cm Platform to hold gas bottles. it is in reasonably good cosmetic condition with marks from use.

If you buy a WLY series balance by July 31, 2024, you will receive each of these products along with (more) a FREE lifetime license for the Workflow Module. Precision Balance WLY Fast and accurate weight determination thanks to the duo: the WLY multifunction balance and the PUE7 weighing terminal. Ease of operation and maximum automation of the weighing process. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations and differential weighing. The power of WLY’s working mods. Use the potential Barcode scanners, receipt printers, label printers, RFID readers, PC equipment or an additional weighing platform – thanks to multipurpose software, WLY balance can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. DIY with WLY With WLY you will Do It Yourself: You will program on-screen keys and functional keys You will program infrared proximity sensors You will design printouts You will design text data that is displayed in an indicator display. This balance is the result of a combination of our experience and true precision. Want to generate labels? You can. With Label Editor software, you will generate: Standard labels for single products C labels for cumulative containers CC labels for containers with cumulative containers. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Maximum Robustness The HRP high resolution scales are very robust. Their platforms are recognised to have an IP 67 level of protection. They feature additional sealing elements to protect against dust, dirt, and moisture and can thus be cleaned with a pressure washer. 9 advantages The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved RADWAG MonoBLOCK technology. The new – taller and larger – RADWAG MonoBLOCK has enabled the best repeatability and speed in the class of high-resolution industrial weighing platforms. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. For such industries as pharmaceutical, chemical, food and… HY10.HRP H scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. The HY10.HRP and HX7.HRP scales whose terminals are made of stainless steel can be used even in the most demanding wet environments. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, moduł wyjść analogowych, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, HY10 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of HY10’s working mods.

IKA Pette multi 12 x 0.5 - 10 µlLies comfortably in your hand with uncompromising precise performanc (more)e: IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 12 x 0.5 - 10 µl includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette multi 12 x 0.5 - 10 µl SpecificationsParameterValueDesignAir displacement piston-operated pipetteHandlingMechanicalVolumeVariableNumber of channels12Colour CodeGrayNominal volume10 µlVolume min.0.5 µlVolume max.10 µlIncrements0.01 µlAccuracy with nominal volume±0.2 µlPrecision with nominal volume±0.1 µlAccuracy with 50% of nominal volume±0.2 µlPrecision with 50% of nominal volume±0.1 µlAccuracy with 10% of nominal volume±0.08 µlPrecision with 10% of nominal volume±0.05 µlCertificate of conformity according to ISO 8655yesAutoclavableyesPiston materialStainless steel DLC coatedDimensions (W x H x D)119 x 235 x 63 mmWeight0.160 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity90 %Comparison of ModelsSpecification12 x 0.5 - 10 µl12 x 10 - 100 µl12 x 20 - 200 µl8 x 0.5 - 10 µl8 x 10 - 100 µl8 x 20 - 200 µlNumber of Channels121212888Nominal Volume10 µl100 µl200 µl10 µl100 µl200 µlVolume Range0.5 - 10 µl10 - 100 µl20 - 200 µl0.5 - 10 µl10 - 100 µl20 - 200 µlIncrements0.01 µl0.1 µl0.2 µl0.01 µl0.1 µl0.2 µlAccuracy (Nominal Volume)±0.2 µl±0.8 µl±1.6 µl±0.2 µl±0.8 µl±1.6 µlAutoclavableYesYesYesYesYesYesDimensions (W x H x D)119 x 235 x 63 mm119 x 235 x 63 mm119 x 235 x 63 mm83 x 235 x 63 mm83 x 235 x 63 mm83 x 235 x 63 mmWeight0.160 kg0.182 kg0.195 kg0.135 kg0.147 kg0.160 kg.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW