Thermo Labsystems Standard Tube Dispensing Cassette Dispensierkassette

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample proce (more)ssing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The instrument is controlled by Windows PC software. This software allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays. Liquid handling: 1 ml thinner Disposable tips: 300 or 1100 µl Pipette range: Simultaneous operation of 4 plates Precision (samples and reagents): CV < 8.0% at 10 µl, CV < 2.5% at 100 µl Level sensor: Electronic Clot detection: Yes Mixing: Yes (pre-dilution tube and microplate) Multipipetting: Yes (sample, control and reagent) Pipetting time samples: < 18 min/96 wells (100 µl/well) Pipetting time reagents: < 4 min/96 wells (100 µl/well) Carry-over: None Identification: Barcode scanner for primary vessels, controls and reagents, Barcode scanner for microtiter plates Tube: Diameter 10-16 mm, Height 55-100 mm Barcode type: 2/5 interleaved, UPC A & E, 2/5 IATA, 2/5 Industrial, EAN 8 of 13, Code 128, EAN 128, Pharmacode, EAN addendum, 2 of 5, Code-a-bar Capacity: Maximum 240 sample tubes Capacity: 4 separate incubators Temperature range: 5°C above room temperature to 50°C Accuracy: ± 1°C average of the plate Consistency: ± 0.7°C/whole plate Shaking: Lengthwise Capacity: Up to 4 wash buffers Wash head: 1 x 8 Pipette volume: 200 – 2500 µl/well, depending on the assay Precision: ± 5% CV at 300 µl Residual volume: < 2.5 µl in round-bottom wells, < 4 µl for flat-bottom wells Level sensor buffer: Yes Level sensor waste container: Yes Wash programs: 1 to 9, depending on the assay Incubation time: 1 to 999 seconds, depending on the assay Pipette pressure: Adjustable for each assay individually Measurement: Vertical with photodiodes, Extinction or kinetic measurement Channels: 8 Operation: Single or double, with second measurement when the measuring range is exceeded Spectrum: 400 – 700 nm Filter: Up to 8 positions are available, of which 5 are already on board (405, 450, 492, 550, 620 nm) Measurement time: < 10 seconds Dynamic range: – 0.100 to 3,000 absorption units Linearity: 0 –2,000 absorption units ± 1.0% Precision: ± 0.005 absorption units or 2.5% Dimensions (WxDxH): 1130 x 760 x 1000 mm Weight: 130 kg

This CTC Analytics Leap HTC PAL Autosampler HPLC was removed from a university lab where it was surp (more)lus to requirements. All units are in good cosmetic condition and powered up. We are unable to test the system further at our facility. Autosampler consists of:Autosampler main unit MXY 01-01BSerial No. 113399 Power supply unit MN01-00 Injector unit MZ01-00DSerial No. 980 Control key pad/screen MB 01-00A 2 x pumps MV 02-01ASerial Nos. 2961, 2963 Sample tray 3 drawer storage MP 02-00B Needle wash unitBottle shelf

Agilent Technologies 6850 Network GC System with Atas Programmable Injector This system was removed  (more)from a university lab where it was surplus to requirements. The system is in fair cosmetic condition and powers on. However, no further testing was conducted as there is no PC or software available to operate the units. The previous owner reported no known faults but noted that the system has been out of use for several years and would likely need recommissioning. Specifications: - Agilent Technologies 6850 Network GC System - Serial No.: 6850-CN10750008 - Atas Programmable Injector - Serial No.: 36083

Thermo Scientific Cytomat Microplate Hotel With Towers This item was removed from a university where (more) it was surplus to requirement. It powers on and is in very good cosmetic condition, we are unable to conduct further testing at our facility. Includes the following microplate towers:2 x Cytopmet P237 x Cytomet P69 Also Included:1 x data cable1 x Cytomat Configuration CD

Yamato IN-804W-115V Programmable Refrigerated Incubator with Window 286L, 115V Temperature Range -1 (more)0°C to +50°C Temperature Distribution Accuracy ±1.0°C (refrigerator in continuous operation at 37°C) Chamber Volume 286L Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention (IN604W/804W) - Interior light for better sample visibility (IN604W/804W) - Optional slide shaker table available to put in and take out samples easily (IN604W) Low temperature 286L forced convection incubator applicable for low temperature tests and environmental tests. Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention. Programmable. High accuracy temperature control and temperature distribution. Operating temperature range: -10~ + 50° C INCLUDED: The Yamato IN-804W-115V Programmable Refrigerated Incubator with Window 286L, 115V includes: - 5 x Shelves w/ 10 Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Boekel Scientific 270440 Jitterbug 4 - Microplate Thermo Shaker 4 Plate, 115V/230VThe Boekel Scienti (more)fic 270440 Jitterbug 4- Microplate Thermo Shaker 4 Plate is a heated microplate shaker ideal forimmunoassays like ELISA, PCR and other research procedures requiring heatingand mixing of microplates. Equipped with a heated lid to provide greateruniformity and prevent condensation. Independently control set temperature,mixing speed and mixing duration. Features Calibration "Mode" Accommodates two or four standard microplates or strip tray Independently set temperature, shaking speed and mixing duration Smooth and quiet operation Heated lid to provide greater uniformity Power Pac is UL, CSA and CE approved 2 Year warranty INCLUDED: The Boekel Scientific 270440 Jitterbug 4 - Microplate Thermo Shaker 4 Plate, 115V/230V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Demo-Instrument in original packaging. 6 months warranty. Thermo product description: TF14 D A 200-2 (more)30/GL T1 1.0KW+ Features: - Digital Display - Power supply: 200-230V - 50/60 Hz - Heating power: 1 kw - Cooling power: 1170 W - Turbin pump (9,5 l/min at 4,1 bar)