Leitz MicroManipulator Lab

This Soxtec Avanti 2050 Auto Fat Extraction System was removed from a university lab where it was su (more)rplus to requirements. Included are; 1 x Foss Tecator 2050 Soxtec Avanti Auto Extraction UnitPart no. 10007330 1 x Foss Tecator 2050 Drive UnitPart no. 10007338 The item powers on with the drive unit supplying power and controlling the extraction unit. It was not tested further. It seems to be missing a control unit. The item is in reasonably good cosmetic condition with some marks from use.

FLX-10-1061 fluidX XTT-96 Microtube Thawing Station, 100-240 V New equipment in its original packagi (more)ng For gentle but rapid thawing of sample storage tubes in 96-well format Damage to samples is minimized because room temperature air is forced over the cooled microtubes, direct heat is not applied Compatible with most rack tubes This compact design is capable of defrosting 96 rack tubes simultaneously

Mini biosafety cabinet Class II A2. Small size to save space 70x65x123cm (LxFxA). Turbine centrifuge (more) with adjustable speed. Speed of upward flow 0.53±0.025 m/s, descending 0.33±0.025 m/s. air Recirculation 30/70. HEPA filter H14. Front window motorized. Interior of stainless steel. White light and UV germicidal. Two outlets inside. Remote control. LCD Display with indicators of air flow, temperature and humidity of the work area, pressure filter, hours of the UV light, hours of use of the filter. Alarms air flow incorrect, replacement of filter and height of the front window. Optional: support structure (+250 €).

Zcorporation Spectrum Z510 3D Printer This was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has not been tested further. Includes: -8 x Elga Veolia LC117 Purification Packs (expired 2019)-12 x Elga Veolia LC101 Pretreatment Packs (expired 2019)-2 x Elga Veolia LC117 Cartridge Packs (expired 2016 + 2010)

GILSON MiniPuls 3 Peristaltic Pump M312 2 Channels Voltage: 220-240V, 50/60Hz Power: 45VA Speed: 0-4 (more)8 rpm Standard Flow Rate: 0.3 µL/min – 30 mL/min at 0.5 MPa max pressure High Flow Rate: 1 mL/min – 220 mL/min at 0.3 MPa max pressure Pump Head Speed: Adjustable 0 to 48 rpm with 0.01 rpm increments at 9.99 rpm and 0.1 rpm increments at 10 rpm Standard Model Tubing Diameter: 0.25–4 mm (ID) High Flow Tubing Diameter: 2–8 mm (ID) External Dimensions (W) x (D) x (H): 15 x 17.5 x 29.5 cm

Hoefer SUB20 Maxi-Standard Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 20 x 20 cm Maxi (more)mum Power Settings 1000 V, 500 mA, 500 W Maximum Buffer Volume 2.2 L Features - Large format‐20 x 20 cm gel tray is ideal for high resolution techniques - Multichannel pipette compatible combs—with a maximum 40 sample throughput reduce gel loading time - Color-coded and height adjustable combs—easily identify comb thickness at a glance and control well depth - Buffer recirculation ports—may be connected to a peristaltic pump for buffer recirculation during electrophoresis to maintain buffer pH and prevent ionic gradient formation - Colored loading strips—for easy well detection when loading - UV-transparent running tray—allows the user to image the gel without risk of damage due to handling - Side handles—for safe and easy transportation around the laboratory The Hoefer SUB20 Maxi-Standard Submarine Gel Electrophoresis Unit is a powerful, large-format system designed to support high-resolution analytical and preparative nucleic acid studies. With a spacious 20 x 20 cm gel tray featuring four comb positions, this unit accommodates up to 168 samples, making it ideal for labs requiring high-throughput and precision in nucleic acid analysis. The SUB20’s versatile design includes multichannel pipette-compatible combs, reducing gel loading time and allowing for efficient sample handling. Equipped with color-coded, height-adjustable combs, the SUB20 allows easy identification of comb thickness and precise control over well depth. Its buffer recirculation ports, compatible with a peristaltic pump, help maintain buffer pH and prevent ionic gradient formation, ensuring consistent results. The UV-transparent running tray enables safe gel imaging without handling, while colored loading strips simplify well detection during loading. Compact and convenient, the SUB20 features side handles for safe transport around the lab, and casting gates that create a secure, hassle-free seal without the need for tape. INCLUDED: The Hoefer SUB20 Maxi-Standard Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly - Safety Lid - High Voltage Leads - Running Tray with Casting Gates - 1 mm thick, 16 well combs, 2 pcs - Colored Loading Strips - Buffer Recirculation Ports, 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

Stainless steel 4-load-cell ramp platforms, equipped with LD4N platform lifting system useful for ma (more)intenance purposes. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.