Laboratory incubator Smart CLW 115 POL-EKO

Gallenkamp Economy Incubator With Fan Size 1  INA.306.010J Lab This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside.

Thermo Scientific Heracell 240i CO2 Incubator This was removed from a university lab where it was su (more)rplus to requirements. The unit has no screen and required a new CO2 sensor prior to the screen being removed. It is sold for spares/repairs.

Memmert IN55plus Natural Convection Incubator 53L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 53 L (1.9 cu.ft.) Features - Internal volume of 53 L (1.9 cu.ft.) for versatile storage needs - Adjustable temperature range from +20°C to +80°C, with a working range at least 5°C above ambient - Precise control with 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring - ControlCOCKPIT with TwinDISPLAY, featuring an adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT displays - Natural convection system for uniform temperature distribution, ensuring optimal results - Electronically adjustable air flap allows for admixture of pre-heated fresh air - Includes AtmoCONTROL software for managing and organizing data via Ethernet or USB interface - Safety features include adjustable electronic overtemperature monitor, AutoSAFETY system, and audible/visual alarms The Memmert IN55plus Natural Convection Incubator 53L, 115V offers precision and reliability for a wide range of laboratory needs. With an internal volume of 53 liters (1.9 cu.ft.), it provides ample space for your samples, all while maintaining a temperature range of +20°C to +80°C. The incubator is equipped with two Pt100 sensors in a 4-wire-circuit for mutual monitoring, ensuring highly accurate temperature control. Its advanced ControlCOCKPIT with TwinDISPLAY provides user-friendly operation, allowing you to adjust parameters like temperature, air flap position, and program time, all displayed on high-definition TFT screens. Designed with natural convection, this incubator ensures uniform temperature distribution without the need for a fan, making it ideal for delicate samples. The electronically adjustable air flap allows for precise control of fresh air admixture, ensuring optimal conditions. Safety is a priority with features like adjustable overtemperature protection, the AutoSAFETY system, and audible/visual alarms. Additionally, the Memmert IN55plus includes AtmoCONTROL software, enabling efficient data management through USB or Ethernet connections. INCLUDED: TheMemmert IN55plus Natural Convection Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

LABORATORY INCUBATORS CLW SMART POL-EKO CLW - FORCED AIR CONVECTION CLW Series incubators maintain a (more) constant temperature from 5°C above room temperature to a maximum of 100°C. The CLW models are available from 15 to 1005 liters with latest generation control, quality materials and first-in-class performances. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLW SMART SERIES The nine models of the CLW series cover most of your needs: from mini stoves to the 1005 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

A programmable laboratory incubator with multiparametric microprocessor with the possibility of memo (more)rizing 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable incubator ICT-R FALC

Laboratory incubator with orbital shaking 50 Liters LBX - NEW New Equipment Model INC-S Temperature  (more)range: Ambient temperature +5°C - 65°C Type of movement: orbital Orbital shakers: 20 mm Allowable capacity (support included): 10 kg Maximum shelf capacity for single specification (ml/pc): 100ml*16 / 250ml*10 / 500*6 Speed range: 30 - 300 rpm speed variation: ±1 rpm Timer: yes Timer (hour and minute setting): 1 - 9999 min Type of operation: timer mode and continuous mode Power: 800 W Internal chamber operating area: 455 x 380 x 290 mm Total volume of the internal chamber: 50 l External dimensions: (L x H x D): 560 x 390 x 320 mm Probe: Pt100 Voltage: 230 V Frequency: 50/60 Hz

Qiagen Pyromark Q96 ID + Vacuum Prep Worktable System Lab This system was removed from a university  (more)where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This system comprises the following: Qiagen Pyromark Q96 ID Qiagen PyroMark Vacuum Prep WorktableRef - 60-0237 PyroMark Vacuum Prep ToolRef - 60-0236 PyroMark Q96 IDApplication Software User Manual

VACUUBRAND VACUU-Select Complete Controller For Lab Scaffold Mounting The VACUU·SELECT complete cont (more)roller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run pre-defined applications at the touch of a button, or create your own application with simple drag-and-drop editing. The controller is available as a benchtop unit, ready for mounting on lab scaffolding, or as a built-in version for lab casework. The integrated controller includes the VACUU·SELECT vacuum controller, a check valve, and a chemical-resistant solenoid isolation valve. The ceramic vacuum sensor and venting valve are built right into the body of the VACUU·SELECT controller. The compact unit is easy to install and setup. With its intuitive, application-based interface, the controller offers predefined vacuum processes for all common laboratory applications. In the case of solvent evaporation, it detects the boiling pressure and then holds the pressure level stable using two-point control.INCLUDED: The VACUUBRAND VACUU-Select Complete Controller For Lab Scaffold Mounting includes: - VACUU·SELECT complete controller for lab scaffold mounting - Solenoid valve - Non-return valve - Integrated ceramic diaphragm vacuum sensor - Venting valve - Power supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Jouan B 4i centrifuge. Not refrigerated. Maximum speed 14,000 rpm/18,400xg. Timer 30 seconds to 99 m (more)inutes+hold position. Equipped with a ventilation system that limits the temperature increase in the container from +3°C to +10°C (depending on the rotor). Imbalance safety system that activates the brake immediately. Includes S40 oscillating rotor with maximum speed 4,300 rpm, and capacity for 4x200 ml / 4x50 ml. for Ø 57mm tube. Dimensions (H x W x D) 372 x 400 x 495 mm 40 kg. User manual. The Jouan B 4i centrifuge with S40 swing rotor is high-quality laboratory equipment that allows the separation of biological samples efficiently and accurately, making it ideal for molecular biology, microbiology and biochemistry applications. Its compact design and silent operation make it an essential tool for any laboratory that requires high-performance centrifugation processes.