Radwag KR-01 Converter

Labconco 7540400 150ml Complete Fast-Freeze FlaskThe Labconco 7540400 150ml Complete Fast-Freeze Fla (more)sk consists of 7542400 Flask Bottom, 7544200 Flask Top and a supply offilter paper. Fast-FreezeFlasks attach with adapters to valve ports on Labconco Drying Chambers andManifolds. They are available in clear or amber-colored glass. A completeFast-Freeze Flask consists of a rubber top, glass bottom and a supply of filterpaper. Tops, bottomsand filter paper are available separately as replacement components. Adaptersare available in borosilicate glass or stainless steel. Fast-Freeze Flasks andAdapters are compatible with any brand freeze dryer that has 1/2" or3/4" diameter valve ports. Glass flaskswithstand maximum temperature of 490º C. Flask toppers withstand a maximumtemperature of 450º C. INCLUDED: The Labconco 7540400 150ml Complete Fast-Freeze Flask includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Detection Modes: Fluorescence Intensity – including FRET Fluorescence Polarization Luminescence  (more)(flash and glow) Time-Resolved Fluorescence – including DELFIA UV/Vis absorbance Measurement Modes: Top and bottom reading Endpoint and Kinetic measurements Sequential Multi Excitation measurements Sequential Multi Emission measurements Simultaneous Dual Emission measurements Ratiometric measurements Well Scanning Microplate Formats: 6 to 384-well plates, user-defi nable Microplate Carrier: Accomodates two plates: one reagent plate and one measurement plate Light Source: High energy xenon flashlamp Detectors: Side window photomultiplier tube Optical Filters: Excitation and emission filter wheels for 8 filters each Spectral Range: 240 to 740 nm or 240 to 900 nm Sensitivity: FI: < 1 fmol / well Fluorescein FP: < 5 mP standard deviation at 1 nM fluorescein TRF: < 70 amol/well Europium LUM: < 30 amol/well ATP, DLReady certified ABS: Dynamic range: ±0.000 – 4.000 OD, Reproducibility: ±0.010 OD for 0 – 2 OD range Read Times: Flying mode: 14 s (96), 27 (384) Reagent Injection: Up to 2 built-in reagent injectors Injection at measurement position (6 to 384-well) Individual injection volumes for each well (3 to 350 µL) Variable injection speed up to 420 µL / s Up to four injection events per well Reagent back flushing Pipettor System: Injection volume: 0.5 µl – 100 µl Individual injection volumes for each well Variable injection speed Plate-to-plate transfer + 3 reagent stations + washing station Shaking: Linear, orbital, and double-orbital with user-defi nable time and speed Gas Vent: System to inject an atmosphere or to pull a vacuum into the reader Incubation: +5°C above ambient up to 45°C or 60°C Equipped with the following filters: Em: 510 – 520 – 530 – 590 – 630 nm Ex: 355 – 390 – 405 – 436 – 440 – 485 – 510 – 544 nm Dimensions (h x w x d): 300mm x 780mm x 530mm Weight: 55 kg 230V / 50-60Hz

For parts only, cannot be repaired! The Sciclone ALH 3000 workstation is the foundation of Caliper L (more)ife Sciences’ family of automated liquid handling systems, and the number one choice of automation experts. With proven performance, open-deck design, and integration-friendly architecture, the ALH 3000 workstation can be configured to handle just about any automated liquid handling application. Open, modulare design Three “Swap-on-the-fly” pipetting heads 96-well plate densitie Volumes from 100 nL to 200 µL Independent 8-channel pipetting capability Compatibility with a wide variety of options, including Sciclone Gripper, bulk reagent modules, an on-deck microplate shaker, temperature-controlled locators, a positive-pressure filtration system, and more Hundreds of different configurations Applications Worldwide popularity and the availability of a comprehensive range of options have made the ALH 3000 workstation a favorite platform for the development of automated liquid handling applications such as: High-throughput plasmid preparation BAC DNA preparation Sequencing template amplification SNP genotyping High-throughput PCR cleanup The Sciclone ALH 3000 Advanced Liquid Handling system delivers highly accurate and precise liquid handling in a versatile, scalable open-design format. With the flexibility to adapt as your needs change, it is an ideal tool for automating virtually any genomic, proteomic or drug screening protocol. Worktable Data: 20 microplate positions, 8 deck holes for recessed accessories (columns 4 and 5) Robotic Positioning: Bi-directional repeatability, X-axis ±20 micron, Y-axis ±20 micron, Z-axis ±20 micron Pneumatic Requirements: Oil-free, dry air at 60 -70 psi recommended Dimensions (HxWxD): 940 x 1220 x 710 mm Weight: 157 kg

Capacity: 34 L Daily evaporation: 0.17 L/day Dynamic endurance: 125 days Neck diameter: 91 mm Canist (more)ers: 6 Vial Capacity: 684 Weight (empty/full): 16.1/43.5 kg

The N 840.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow Rate (max.) 34 l / min Ultimate Vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Permissible Medium Temperature 5-40°C Valve Material FFPM Diaphragm Material PTFE coated Pump Head Material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Fast and Stable Measurement It only takes a second for the balance to display the final measurement  (more)result. Weighing Heavy Loads with High Accuracy On the large weighing pan of a PM balance, you can weigh a load of 120 kg with a readability of 0.2 g and second-to-none repeatability. Minimum Eccentricity Error Over the Entire Range PM balances can be used to determine the mass of irregularly shaped components with a centre of gravity that is significantly shifted from the weighing pan axis. Parameter Stability Over Time and After Transport The mechanical design is resistant and robust, allowing you to maintain the correct metrological parameters after transport and despite long and intensive use. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.01 g on the 200 x 185 mm weighing pan and with a readability of 0.2 g on the 500 x 400 mm weighing pan. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails New, lmproved The new, taller and larger MONOBLOCK&reg; enables the best repeatability and speed in its class of weighing platforms. 5Y Terminal With Terminal 5Y you get a 10-inch display, Digital Weighing Auditor, multi-step user verification, ambient light alerts, hotspot, RFID*, live note voice and text notes, voice commands for the balance and handy measurement history within the handy library widgets Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring. * RFID ISO/IEC 14443 Type A, 13,56 MHz

System consisting of: Gilson GX-281 sample robot 2 Gilson 6 position valves Gilson 306 pump Gilson 1 (more)59 UV-Vis detector Gilson 321 pump Software

Three independently controlled stirring positions Powerful magnets for strong magnetic coupling Stai (more)nless steel top plate A space saving and economical unit with three independent stirring positions in a footprint only 600 x 270 mm. Easily accommodates 3 x 2 litre beakers. The stainless steel top plate is robust and, unlike aluminium, does not produce eddy currents and so ensures a very powerful coupling and stirring action. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres Plate material: Stainless steel Plate dimensions: 550 x 210 mm Speed range: 100 to 1500 rpm Dimensions (WxDxH): 600 x 270 x 110 mm Weight: 7 kg