Laboratory Oven STF-N 52 FALC

Thermo Scientific HERACELL 150i GP Co2 incubator / oven In excellent condition, only used 6 months.  (more)Thermo reference: 51032719 Years of manufacture: 2021 Forced convection Volume: 151 liters Stainless steel chamber iCAN touch screen Patented humidification system without water tray for rapid return to set points Temperature regulation range. : TA+3 at 55°C Constant humidity: 95% ± 3 Hr CO2 regulation range: 0 to 20% Heat emission at 37°C: 0.06 kWh/h CE certification 230 V, 50/60 Hz Ext. sun. (L x H x D) mm: 637 x 867 x 782 Sun Int. (L x H x D) mm: 470 x 607 x 530 Weight: 70 kg Supplied complete with: 1 CO2 thermal conductivity (CT) sensor 1 water level sensor 3 stainless steel shelves 423 x 465 mm 1 42 mm cable passage 1 interior glass door with closure Tested at 37°C CO2 at 5% Year of manufacture: 2021

Memmert SV2945 Stirring device with support frame for 29 and 45 L models (requires special cover) Ne (more)w equipment in its original packaging Memmert reference: SV2945 Stirring device with support frame for 29 L and 45 L Memmert water and oil baths

Yamato DG-440C Natural Convection Glassware Drying Oven with Sterilization Lamp 92L, 115V Temperatur (more)e Range Ambient +5°C to 70°C Heater Power 1.0 kW Chamber Volume 92L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 92L glassware drying natural convection oven with large observation window for easy observation. Equipped with filter at air in-take port, exhaust fan and germicidal lamp for fast drying. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-440C Natural Convection Glassware Drying Oven with Sterilization Lamp 92L, 115V includes: - 2 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Polyscience CA05A1P1-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C, 1740W, 1 (more)20VACFeatures - Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA05A1P1-41AA1N Durachill Chiller , -10°C to 70°C, 1740W; 120V is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA05A1P1-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C, 1740W, 120VAC SpecificationsPart NumberCA05A1P1-41AA1NCooling Capacity @ 20°C1.74 kWCooling Capacity @ 10°C1.29 kWCooling Capacity @ 0°C0.77 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range45 to 100 psi / 310 to 689 kPaMaximum Pump Flow Rate2.6 gpm / 9.8 lpmPower Requirements120V, 60Hz, 17.3AShipping Weight172 lbs / 78.1 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(6) { background-color: #fffacd; }

IKA C-MAG HP 4 Hot Plate Volume Max. 5 L Plate Dimensions (mm) 100 x 100 Working Temperature 50 - 5 (more)00 °C Features - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Exact temperature setting via digital display (LED) - Digital error code display - Elevated control panel for protection against leaking liquids The C-MAG HP 4 hotplate features a durable ceramic glass surface with excellent chemical resistance. It has a fixed safety circuit of 550 °C, a Hot Top indicator for burn prevention, and an exact temperature setting via a digital LED display. Designed with an elevated control panel to protect against leaks, it offers a single heating point with a 250 W output, heating from 50 to 500 °C, and a turning knob for control. Compact and lightweight, it measures 150 x 105 x 260 mm and weighs 3 kg, suitable for up to 5 liters of volume. It operates at 120 V, 50/60 Hz, with a power input of 255 W, and meets IP 21 protection standards. Click Here to View Product Video INCLUDED: The IKA C-MAG HP 4 Hot Plate includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA C-MAG HP 4 Hot Plate Specifications Number of heating points1Heat output250 WHeating temperature range50 - 500 °CHeat controlTurning knobSet temperature resolution10 ±KVolume max.5 l Heating rate heating plate2.5 K/min Set-up plate materialceramic Set-up plate dimensions100 x 100 mmDimensions (W x H x D)150 x 105 x 260 mmWeight3 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage230 / 120 / 100 VFrequency50/60 HzPower input255 WComparison of ModelsSpecificationsC-MAG HP 10C-MAG HP 4C-MAG HP 7Heat Output (W)15002501000Heating Temperature Range (°C)50 - 50050 - 50050 - 500Volume Max. (l)15510Heating Rate Heating Plate (K/min)52.55Set-Up Plate MaterialCeramicCeramicCeramicSet-Up Plate Dimensions (mm)260 x 260100 x 100180 x 180Dimensions (W x H x D) (mm)300 x 105 x 415150 x 105 x 260220 x 105 x 330Voltage (V)230 / 120 / 100230 / 120 / 100230 / 120 / 100.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Corepoint Scientific FF171WWW-0MHCTS -15C to -25C Flammable Material Storage Freezer Temperature Set (more)point Range -15°C to -25°C Capacity 17 cu. ft. Defrost Method Manual Features - EPA compliant high density urethane foam insulation - Magnetic door gasket for positive seal - Keyed door lock - Microprocessor temperature controller with digital temperature display - Touch screen digital temperature display with user friendly interface - Active temperature scale bar display - Digital 24-hour temperature chart The Corepoint Scientific FF171WWW-0MHCTS is a specialized Flammable Material Storage Freezer designed to safely store flammable and combustible materials, meeting NFPA 45 and NFPA 30 standards for use in unclassified laboratory locations. This freezer offers a 17 cu. ft. storage capacity within a robust powder coat steel exterior and features high-density urethane foam insulation for optimal thermal stability. Key elements of this freezer include a solid, right-hinged door with a magnetic seal for a secure closure, complemented by seven inner doors which enhance the organization and accessibility of stored materials. The unit is equipped with a microprocessor temperature controller that provides a digital temperature display, adjustable from -15°C to -25°C, and includes a user-friendly touch screen interface. Safety and monitoring enhancements include multiple alarms such as audible and visual high/low temperature alerts, door ajar and power failure alarms, all designed to maintain critical conditions without compromise. INCLUDED: The Corepoint Scientific FF171WWW-0MHCTS -15C to -25C Flammable Material Storage Freezer includes: - Key for Door Lock - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Maximum Robustness The HRP high resolution scales are very robust. Their platforms are recognised to have an IP 67 level of protection. They feature additional sealing elements to protect against dust, dirt, and moisture and can thus be cleaned with a pressure washer. 9 advantages The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved RADWAG MonoBLOCK technology. The new – taller and larger – RADWAG MonoBLOCK has enabled the best repeatability and speed in the class of high-resolution industrial weighing platforms. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. For such industries as pharmaceutical, chemical, food and… HY10.HRP H scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. The HY10.HRP and HX7.HRP scales whose terminals are made of stainless steel can be used even in the most demanding wet environments. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, moduł wyjść analogowych, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, HY10 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of HY10’s working mods.

Yamato DNF-301-115V Programmable Energy Saving Forced / Natural Convection Oven 27L, 115V Temperatur (more)e Range Ambient +15°C to 260°C Temperature Distribution Accuracy Forced Convection: ± 2.5°C (at 260°C) Natural Convection: ± 5°C (at 120°C) Chamber Volume 27L Features - Two types of circulation, forced and natural convection, in one unit (compatible with model 300/400/600) - Eco-oven with improved air velocity control system and adjustable damper - Program featured to reduce power consumption significantly - Superior heat tightness and insulation of chamber - Excellent dust tightness, dust can hardly enter the chamber - Air velocity changeable in 10 stages using digital setting of controller - Standard with 99 step program operation with repeat operation, auto start, auto stop and quick auto stop functions - Adjustable damper position at chamber front to optimize operation - Fluorescent display, interactive input method, calibration off-set function High-performance, energy-saving, programmable 27L constant temperature oven with two types of circulation (forced and natural convection) in one unit. Program featured to reduce power consumption significantly. Superior heat tightness and insulation of chamber. Excellent dust tightness, dust can hardly enter the chamber. Air velocity changeable in 10 stages using digital setting of controller. Standard with 99 step program operation with repeat operation, auto start, auto stop and quick auto stop functions. Adjustable damper position at chamber front to optimize operation. Fluorescent display, interactive input method, calibration off-set function. Operating temp ambient +15~260°C. INCLUDED: The Yamato DNF-301-115V Programmable Energy Saving Forced / Natural Convection Oven 27L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA MF 10.1 Mill Cutting-grinding Head For crushing fibrous substances such as paper and vegetation (more), but also for plastics and material with a low volume weight. Before being discharged, the ground material passes through a sieve. This sieve is interchangeable and available in different hole sizes (not incl. with delivery). The ground material can then be collected using an NS 29 standard ground vessel. INCLUDED: The IKA MF 10.1 Mill Cutting-grinding Head includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty IKA MF 10.1 Mill Cutting-grinding Head Specifications Process type inlineCircumferential speed max. 24.5 m/sFeed grain size max.15 mmMaterial milling chamberstainless steel 1.4308Mill feed can be cooled in milling chamber with dry iceyesDimensions (W x H x D)320 x 560 x 300 mmWeight2.633 kgRequest a Formal Quote