Laboport N 938.50 KT.18 KNF

Heated immersion circulator Isotemp 4100C FISHER SCIENTIFIC New equipment (never used) Fisherbrand T (more)emperature range: Ambient temperature 10 to 100°C Heating capacity: 1.2 kW Model: 4100C Temperature stability: ± 0.05°C Dimensions: 11.18 x 32 x 20.27 cm Weight: 4.1kg Voltage: 230 V Max pressure 310

MVE XLC 230 Liquid Nitrogen Dewar This was removed from a university lab where it was surplus to re (more)quirements. The unit is in reasonable cosmetic condition with marks from use but has not been tested. It comes with 6 storage racks each with 8 draws. Internal Dimensions are: D70cm x W40cm.

Statebourne Crogenics Biostor 5 Liquid Nitrogen Dewar This was removed from a university lab where i (more)t was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Internal Dimensions are: D 70cm x W 40cm. Item has 6 storage containers each with 9 draws.

Promega Glomax 20/20 Luminometer This system was removed from a university lab where it was surplus  (more)to requirements. The unit powers on and is in good condition with minimal wear. It successfully runs the luminescence measurement program. No further testing was conducted. Specifications: - Model: 2031-000 - Serial No.: 203001378 - Device Configuration: - 20/20 Luminometer Injectors: 0 - GUI Version: 5.0.11 - Firmware Version: 7.12 - FPGA Version: 0011 - FPGA ID: 0800

OVAN MultiMix Heat MMH50 magnetic digital stirrer. Heated multi-shaker on a single platform with 5 p (more)ositions, with a single electrical connection and independent operation of each place. Speed range from 200 to 1200 rpm. Temperature range from 30 to 400 ºC. Maximum capacity per square 2L. Plate dimensions of 100 * 100 mm for each square. OVAN MultiMix Heat MMH50 magnetic digital stirrer. Heated multi-shaker on a single platform with 5 positions, with a single electrical connection and operation independently of each position. Adjustable speed and temperature, controlled by microprocessor. High precision with integrated internal Pt100 probe. LED display. Keyboard with membrane buttons, sensitive to the touch. The selected parameters are kept in the memory of the equipment even when it is turned off.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-24098 Bowens Esprit 500 Professional Photography Flash Head with Accessories [condition: Used]ITEM-29716 Unbranded Mechanical Stage Cross Specimen Table Lab [condition: Used]ITEM-17348 Raymond A Lamb Hotplate Lab [condition: Used]ITEM-29783 Labnet Spectrafuge 16M ITEM-21195 3 x Micro Centaur Centrifuges [condition: Used]ITEM-17226 Bieffe Padova Light Source [condition: Used]ITEM-21148 3 x Bio-Rad Power Pac [condition: Used]ITEM-21064 WPA CQ75 Chart Recorder [condition: Used]ITEM-29874 Labnet MultiGene II Thermal Cycler [condition: Used]ITEM-21080 Thermo Electron FastPrep FP120 Cell Disrupter Lab [condition: Used]ITEM-21206 Advance Electronics Voltage Stabilizer [condition: Used]ITEM-17340 Stuart Scientific Orbital Shaker SO1 [condition: Used]ITEM-21146 2 x Stuart Scientific Orbital Shaker SO1 [condition: Used]ITEM-23963 8 x Eagle UV Bank Note Checker Lights [condition: Used]ITEM-17090 Hanna Instruments HI 8417 pH Meter [condition: Used]ITEM-17344 Lot of Microscope Heads & Other Parts [condition: Used]ITEM-21065 Griffin Velocity of Light Apparatus [condition: Used]ITEM-23988 Sorvall SS-34 Rotor [condition: Used]ITEM-21061 Philip Harris Classroom Laboratory Joulemeter Lab [condition: Used]ITEM-29717 Nikon Phase Contrast Condenser [condition: Used]ITEM-29622 Job Lot Axon Instruments [condition: Used]ITEM-17178 Lathe Faceplate 40cm Diameter [condition: Used]ITEM-19090 BIO-RAD Screen Eraser - K Phosphorimager Lab [condition: Used]ITEM-21152 Heraeus #3335 Centrifuge Rotor [condition: Used]ITEM-17360 Grant GD100 Laboratory Water Bath Lab [condition: Used]ITEM-23989 Sorvall SS-34 Rotor [condition: Used]ITEM-17088 Kodak Darkroom Lamp [condition: Used]ITEM-21181 5 x Audio / Sound Dual Channel Passive Direct Injection Boxes [condition: Used]ITEM-17293 Lot of Monitor Brackets [condition: Used]

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

It is the ideal solution for laboratories and institutions requiring the highest precision. The cyli (more)ndrical mass standards are made from the highest quality materials, ensuring their stability and resistance to changes in environmental conditions. This makes them perfect for the calibration of precise measuring instruments. Product Features: Highest Class of Accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden Packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set Includes: 17 mass standards, 2 pairs of tweezers, 2 brushes and 1 pair of gloves. Applications E1 class standards are ideal for the calibration and verification of precise analytical and laboratory balances, indispensable in metrology laboratories, as well as in research and industrial institutions where maintaining the highest standards of accuracy is necessary. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

Motic PA53MET Trinocular Upright Industrial Microscope, 100W Reflected Illumination Objectives S-AP (more)O 5X, 10X, 20X, 50X Objectives Optical System Colour Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Expertly designed, carefully crafted, high-performance Motic objective lenses provide excellent clarity in any observation environment. - Intelligent, Sleek Design - Advanced ergonomic design, compact size, carefully sourced high-quality materials ensure durability. - Versatile digital capabilities minimize fatigue during extended periods of operation. - Innovative Module Design - The compact size of the PA53-MET minimizes required installation space. - Interchangeable individual modules meet the needs of any application. - You can select the appropriate optional accessories for your task: reflected light illuminators, transmitted light illuminators, XY stage, Z-axis, etc. The Motic PA53MET is a trinocular metallurgical microscope featuring a reflected intermediate illumination system suitable for bright field observation. It comes equipped with a 100W halogen lamp house and widefield eyepieces offering 10X magnification and a 25mm field of view. The device includes a coded quintuple revolving nosepiece for BF with a DIC slot, and Plan S-APO objectives at 5X, 10X, 20X, and 50X magnification. Additionally, the PA53 MET's design is highly modular, allowing for future upgrades with motorized components. Motic's PA53 MET series microscopes are tailored for industrial quality control and the analysis of opaque materials. They feature semi-apochromatic objectives that deliver sharp, clear images. The microscope's incident illumination supports various contrast methods, including Brightfield, Darkfield, Polarization, and DIC, revealing defects not visible under standard lighting conditions. INCLUDED: The Motic PA53MET Trinocular Upright Industrial Microscope, 100W Reflected Illumination includes: - S-APO S-APO 5X, 10X, 20X, 50X Objectives - Widefield (FN25) eyepiece 10X/25mm - 4x4 inch right hand stage with metal stage plate - PA-25ND6 neutral density filter and PA-25LB LBD filter - Widefield (FN25) eyepiece 10X/25mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty