FISHER BIOBLOCK SCIENTIFIC Polystat 23 Tankless Immersion Circulator

Manufacturer: Binder Model: UF V500 Ultra Low Freezer (-40..-90°C) P/N: 9020-0347 Description: The  (more)BINDER ultra low temperature freezer ensures the safe storage of samples at -90 °C. It combines outstanding environmental friendliness with low energy consumption, convenient operation and an individual safety concept. Benefits - Lowest energy consumption in its class- Environmentally friendly refrigerant- Multi-level safety concept Important characteristics - Range of temperature controller: -90 °C to -40 °C- Lowest energy consumption in its class- Powerful cascade compressor cooling unit- Environmentally friendly refrigerants R-290 and R-170- Efficient thermal insulation with vacuum insulation panels- Innovative door gasket concept reduces buildup of ice- Ergonomic door handle- Rust-proof interior made completely of stainless steel- Detachable inner doors made of stainless steel- 3 stainless-steel shelves providing flexible placement- Water cooling (depending on version)- Zero-voltage alarm contact for in-house alarm system- Ethernet interface- Elapsed time indicato- 2 access ports, Ø 28 mm, rear Specifications:Performance Data Temperature Cooling down time from 22 °C to -80 °C: 360 minTemperature fluctuation at -80 °C: 1.5°CTemperature range: -90…-40Temperature variation at -80 °C: 2.5 °CWarm-up time during power failure from -80 °C / -122 °F to -60 °C / -76 °F: 230 minElectrical data Nominal power: 1.6 kWPhase (Nominal voltage): 1~Power frequency: 50 Hz Rated Voltage: 230 VUnit fuse: 10 AUnit doors: 1 Housing dimensions not incl. fittings and connections Exterior dimensions: (WxHxD) 938 x 1966 x 826 mm Interior dimensions: (WxHxD) 605 x 1300 x 606 mm  Interior volume: 477LNet weight of the unit (empty): 247kgPermitted load: 200kgPermitted load of individual compartment: 50kgWall clearance back: 100 mmWall clearance sidewise: 250 mmEnvironment-specific data Energy consumption at set-point -80 °C and ambient temperature = 21 °C: 7.9kWh/dSound-pressure level: 47dB(A) Number of shelves (std./max.): 3 / 13Load-variants Cryoboxes, 50 mm: 352Freezer racks per compartment: 4 Itemds delivered: - Binder UF V500 Ultra Low Freezer  - Instruction Manual The Binder UF V500 Freezer is new and has never been used in lab environment.Ready for it's first duty.

Julabo FL2506 Recirculating Chiller Lab This item was removed from a university where it was surplus (more) to requirement. It is in good cosmetic condition and in good working order.

Yamato SDP-300 Benchtop Vacuum Oven 47.2L, 110-120V Operating Temperature Range +10-220°C Operatin (more)g Pressure Range 10 - 101 kPa Internal Volume 47.2L Features - Programmable Watlow controller to perform multiple ramp and soak profiles - Digital vacuum gauge displaying vacuum level of chamber - Doors with positive latch handles and spring-loaded glass facilitating good vacuum seal - Tempered glass viewing window for safe, continuous monitoring of samples - Generous usable shelf area - Meets TUV safety requirements Meet the SDP Series Vacuum Oven, an indispensable addition to your laboratory toolkit. Available in both SDP300 and SDP310 models, this versatile oven offers precise control and dependable performance. With an operating temperature range from room temperature +10°C to 220°C and an operating vacuum range from 40-3.0 to -29.9 inHg, it's suitable for a wide range of applications. The EZ-ZONE Watlow controls ensure ease of use, while the KF25 access port allows for convenient access. Experience exceptional temperature uniformity, with ± 6.0% of setpoint at midrange, and remarkable stability with ± 0.1°C at 80°C, ± 0.20°C at 150°C, and ± 0.3°C at 220°C. Heat up times are impressively fast, and cool down times are efficient. This digital controller boasts a display resolution of 0.1°C and is constructed with high-quality materials both inside and out. The interior boasts 300 SST, while the exterior is made of painted cold roll steel. You'll find a silicone gasket for a standard chamber seal, and the spacious internal dimensions of W304 x D508 x H304 mm provide ample room for your samples. With a total internal capacity of 47.2L and three sturdy shelves, each capable of holding up to 15.8 kg, this oven is well-suited for various applications. The SDP Series Vacuum Oven is available in two power source options (AC110 - 120V 10A or AC220 - 240 5.5A) and is a reliable workhorse for your lab, weighing in at ~83kg. It comes complete with three shelves, a power cord, and four leveling feet, making it a versatile and essential tool for your laboratory needs.INCLUDED: The Yamato SDP-300 Benchtop Vacuum Oven 47.2L, 110-120V includes: - 3 Shelves (2 tall, 1 short bottom) - 4 Leveling Feet - Power Cord - One Year Manufacturer's Warranty

White light transilluminator used for viewing x-rays, autoradiographs and microtiter plates. Dimensi (more)ons: 400*300*90mm.

Ohaus HB4DG Digital Dry Block Heater, 4 Block Temperature Range Ambient +5°C to 120°C Control Digita (more)l Uniformity Within the Block ± 0.1°C at 37°C Features - Offers accurate and fast sample heating with PID microprocessor temperature control - Supports four interchangeable modular blocks with over 40 configurations - Tool-free block setup for easy operation - Enhanced tube-to-block contact for maximum heat retention and efficiency - Robust painted steel housing for durability - Equipped with a clear LED display and easy-to-use touchpad controls with independent displays for temperature and time - Timer from 1 second to 9,999 minutes - Includes a unique single point calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints - Versatile utility across various laboratory applications - Designed for long-lasting performance in demanding settings The Ohaus HB4DG Digital Dry Block Heater offers accurate and fast sample heating with PID microprocessor temperature control, making it perfect for various applications that demand consistent heating. This heater accommodates four interchangeable modular blocks, providing over 40 configuration choices to suit different needs. The modular blocks are designed for effortless setup without requiring tools, ensuring optimal tube-to-block contact for superior heat retention and efficient operation. The HB4DG features a robust painted steel housing and is equipped with a clear LED display, easy-to-use touchpad controls with independent displays for temperature and time, and an audible alarm, enhancing usability and precision. This Dry Block Heater also includes a unique single point calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints, making it a superior choice for modern lab environments.Please Note: Blocks are sold separately and are REQUIRED for operation. Please view the Accessories tab. INCLUDED: The Ohaus HB4DG Digital Dry Block Heater, 4 Block includes: - Support Rod Holder with Locking Knob - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Corepoint Scientific NSBF231WSWCR-0 -15C to -35C Single Solid Door Plasma Freezer with Chart Recorde (more)r Temperature Setpoint Range -15°C to -35°C Capacity 23 Cu. Ft. Defrost Method Cycle Optimized, Automatic Features - Provides a spacious 23 cubic feet of storage, ideal for storing a large volume of blood-based products in compliance with FDA and AABB standards. - Features a top-mounted, variable speed compressor with a temperature setpoint range of -15°C to -35°C. - Equipped with seven standard 304 stainless steel drawers that can each hold up to 65 lbs. - Utilizes high-density urethane foam for both cabinet and door, enhancing thermal efficiency and maintaining uniform temperature. - Proportional Integral Derivative (PID) microprocessor with a clear LCD display and °C/°F switchable settings, providing precise control and easy monitoring. - Includes a full suite of alarms such as power failure, temperature sensor failure, and door ajar notifications, ensuring safety and compliance. The Corepoint Scientific NSBF231WSWCR-0 Single Solid Door Plasma Freezer is engineered to meet the rigorous standards required for the storage of blood-based products, conforming to FDA Class II medical device guidelines and AABB requirements. This plasma freezer offers a 23 cubic feet capacity and operates within a temperature setpoint range of -15°C to -35°C, ensuring optimal conditions for the preservation of critical materials. It features seven 304 stainless steel drawers that facilitate organized storage and easy access. The unit is built with high-density urethane foam insulation for superior temperature stability (+/- 0.1°C) and uniformity (+/- 0.7°C), and the exterior is finished in white powder-coated steel for durability. Mobility is enhanced with four swivel casters, front casters locking for secure placement. The plasma freezer includes a keyed door lock for restricted access, ensuring content security. Notable features include a Proportional Integral Derivative (PID) controller for precise temperature management, and a chart recorder for continuous monitoring and recording of temperature data. The freezer uses eco-friendly R600a refrigerant, aligning with EPA SNAP compliance for environmental responsibility. The dimensions of this freezer are 27.8 inches wide, 36.3 inches deep, and 81.5 inches high, and it weighs 360 pounds, making it a robust and reliable solution for any medical or laboratory setting requiring stringent blood storage regulations. INCLUDED: The Corepoint Scientific NSBF231WSWCR-0 -15C to -35C Single Solid Door Plasma Freezer with Chart Recorder includes: - 7 Drawers - 4 Swivel Casters - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Muffle furnace Selecta SELECT HORN. Chamber capacity 9 L. Adjustable temperature up to 1150 °C. Accu (more)racy ±1 °C. Resolution: 1 digit. Digital electronic temperature and time controller that allows programming a ramp of up to 8 segments or two of 4 segments. Heating elements evenly distributed. Fiber-ceramic insulation. Up-and-over door with disconnection of operation in opening. It has some flaws in the paint that do not prevent its operation. Dimensions: inside 15*20*30 cm, outside 58*59*65 cm; 70KG. 3000 W. User manual. The Selecta SELECT HORN muffle furnace is high-quality equipment designed to carry out calcination, heat treatment and other processes at high temperatures in a precise and controlled manner. With a heavy-duty heating chamber and a digital control system, this oven guarantees uniform heat distribution and a constant temperature throughout its interior. With a capacity of up to 1150°C, the Selecta SELECT HORN muffle furnace is ideal for research laboratories, chemical and metallurgical industries, as well as applications in the field of ceramics and jewelry. Its compact design and robust construction make it easy to use and maintain, ensuring reliable, long-lasting performance in every work cycle. In addition, the Selecta SELECT HORN muffle furnace has a safety system that protects both the equipment and the user, avoiding possible accidents during its operation. With an intuitive interface and programmable functions, this oven offers versatility and precision in each process, making it an indispensable tool for any laboratory or industry that requires high controlled temperatures.

F1 Mass Standard - knob weights, wooden box. Nominal value - 2000 kg.

PM Balances by RADWAG Laboratory Precision Under Industrial Conditions. New technology The ability t (more)o weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. Under-Pan Weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Gilson PIPETMAN L Starter Kit, P20L, P200L, P1000LThe economically priced PIPETMAN L Starter Kit fea (more)tures three of the most commonly used pipettes - a P20L, P200L, and P1000L - plus accessories, tips, and the Gilson Guide to Pipetting. With comfortability, accuracy, precision, and reliability, use the PIPETMAN L pipettes confidently in your applications Convenient UseLightweight and balanced, PIPETMAN L combines an ergonomicdesign with minimized pipetting forces, giving you the ability to pipettelonger without fatigue. Right-handed or left-handed? No problem. Adjust thelocation of the tip ejector to the most comfortable position for you.Secure PipettingReduce pipetting errors and avoid accidental volume changesduring pipetting cycles with a true volume-locking mechanism for improvedaccuracy and precision. PIPETMAN L variable volume models are all fullyautoclavable without disassembly for maximum convenience and protection fromcross-contamination.GLP CompliancePIPETMAN L models feature a DataMatrix 2D code for easytraceability. Use a 2D code scanner to transfer the code automatically into anytraceability or asset management system. Also, the pipette serial number isengraved on the body of the pipette for unique identification. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN L Starter Kit, P20L, P200L, P1000L includes: - Three PIPETMAN L Pipettes: P20L, P200L, P1000L Equipped with Stainless-Steel Tip Ejectors - Two Racks of PIPETMAN DIAMOND Tips (Models: D200 and D1000) - Three SINGLE Pipette Holders - Three Plastic Tip Ejectors - Two Minute Inspection Poster - Operator's Guide - 3 Year Manufacturer's Warranty